Jump to content

Recommended Posts

Hi Everybody,

 

I am new to this forum and to gun ownership in general. I've always been interested in firearms but was scared away by New Jersey's stringent firearm laws. Finally, within this past year, i took the plunge and submitted an application for my FID. I received it a few months ago and immediately purchased a 12 gauge for trap shooting. I've been having a blast. However, I've been looking into acquiring a rifle that i can plink around on at the range. I'm very interested in purchasing an SKS. I've read that they can be had for cheap and i love the look and feel of them. I had a chance to shoot one that my coworker owns and since then i've been sold. That being said, my coworker is not a New Jersey resident.

 

My question is... Being a New Jersey resident, how can i go about purchasing an SKS? I noticed that a great deal of them are offered online but obviously that is a no-no in NJ. Also, they do not seem to be offered in any of the local gun stores, more than likely due to their age. I'd rather not have to travel out of state.

 

Any suggestions? I'd rather not have to travel out-of-state to a PA gun show or something.

 

Best,

 

Michael

Share this post


Link to post
Share on other sites

You can order and ship any ( nj legal ) rifle and handgun to the state of NJ, only catch is it cannot be shipped to you, and has to be picked up at an FFL, I've seen a bunch in gun stores, I know NJ firearms guild in rahway had some a few months back, expensive and over priced, but they had them.

Share this post


Link to post
Share on other sites

Wait, what's considered a "no-no"?

 

You can order it online and have it shipped to an FFL (gun store) near you. You pay them a transfer fee and then it's yours.

 

Why don't you want to travel out of state? I will tell you out of state (PA) will most likely have the best selection of SKS' and milsurps. Very rarely will you find a NJ gun store that has SKS or milsurps in stock, and if they do, they have one or two.

 

I'd suggest Sarco in Easton, PA. They have about 25-30 on a rack that you can fondle and choose the one you like best. They run from like $300-400 I believe, depending on condition.

Share this post


Link to post
Share on other sites

Welcome to the forums.

 

I strongly encourage you to join the New Jersey Second Amendment Society (NJ2AS.org), watch the video below and share it with your friends.

 

 

If you are looking for a plinking rifle, you may want to consider a Ruger 10/22. I would love to own an M1 Carbine, but can't in this state, so I dressed my 10/22 up to look like one instead. The ammo on a 10/22 is cheap and you can shoot it at most pistol ranges.

 

If you are looking for an SKS, be patient. Go to the Marketplace and put a forum alert on any new postings. They pop up here once in a while for about $300 or so.

 

All the best.

Share this post


Link to post
Share on other sites

suggest Sarco in Easton, PA. They have about 25-30 on a rack that you can fondle and choose the one you like best. They run from like $300-400 I believe, depending on condition.

 

Just saw 5 pristine yugo sks's there a few days ago. They were the imported by Cherry's stamped ones..........light stock and under the cosmo brand new gun.....the "unfired kind"......price was 375$ on the rack but they had tags on them that said 400$................i asked and they said they are selling them for 400$

 

Share this post


Link to post
Share on other sites

Thanks for all the answers guys. I am in Jersey City. I suppose i'll take be either taking a drive to PA or checking out a website that can perhaps ship it to Caso's Gunarama. Should i just call Caso's and ask first? Do you guys know any good websites? Also, in your guy's opinion, which country of origin is best? Yugo vs. China vs?

Share this post


Link to post
Share on other sites

Before you go to look for an SKS, read up on them. There is a lot of info at the following places:

 

http://www.sksboards.com/smf/index.php

 

http://www.milsurps....splay.php?f=133

 

http://yooperj.com/SKS.htm

 

This will keep you busy for a couple of days and will help you decide on what you want. I have a Chinese and Yugo. They're fun to shoot and ammo is cheap.

Share this post


Link to post
Share on other sites

Thanks, Sigman. You're the man. Any suggestions on some sites that i can have ship to my local FFL, if in fact i decide to purchase one?

 

Wideners had them a few months ago, but they have sold out.

http://www.wideners....ir=700|701|1029

 

Try some internet searches to see if you find someone with them in stock. The only problem with this is you won't be able to see what you're getting. I would check Sarco as suggested. Call them and see what they have. I know a FFL in North Jersey that may have some unfired condition, but they will cost over 400. Let me know if you want his info and I'll PM you. Good luck!

Share this post


Link to post
Share on other sites

Welcome to the forum, a lot of good advise already so all that's left is to let you know you will need to post photos of what you get or you will get a bunch of these..

 

:zzthiwwop:

 

hahaha! I will absolutely go ahead and do that once i get it!

 

 

Wideners had them a few months ago, but they have sold out.

http://www.wideners....ir=700|701|1029

 

Try some internet searches to see if you find someone with them in stock. The only problem with this is you won't be able to see what you're getting. I would check Sarco as suggested. Call them and see what they have. I know a FFL in North Jersey that may have some unfired condition, but they will cost over 400. Let me know if you want his info and I'll PM you. Good luck!

 

Thanks again Sigman!

Share this post


Link to post
Share on other sites

Welcome to the forum. Just a word of warning regarding the SKS if you decide to purchase out of state. A removable magazine SKS is on the banned list, but a fixed magazine is fine. Hope you find a nice one, and enjoy shooting it. I have a Russian and a Yugo. They're all sorts of fun.

Share this post


Link to post
Share on other sites

Maks was looking to possibly part with his (a Russian, of course ;) awhile back, I don't know if he sold it or decided to keep it. If you do buy, I would recommend the Tec sights, unless you find a Chinese one with peep sights already installed.

Share this post


Link to post
Share on other sites

I read on forums that people were happy with these:

 

http://www.aimsurplu...spx?item=F3RSKS

 

AimS is a top notch company. They aren't unfired ones but for 300 bucks they are in good condition and will be good shooters. I would sign up on the email list and you'll get an email when they come in.

 

Tons of other sites have SKS as well. I usually gravitate towards the companies I have dealt with before, even if their prices are a little more than others.

 

p.s. - I would highly suggest going to Sarco. I know you're in Jersey City so it would probably be about a 60-90min drive but would be well worth it. You won't get to handle any guns you buy off the internet, and for used guns/milsurps, you usually want to look at them before you buy them. Even though you may find driving out there a pain the a**, it would be your best option. Ordering online and clicking your mouse a couple times and picking it up at a local shop is easy, but nothing beats playing with 20 rifles and picking the one YOU want, not the one someone else picks for you. Plus Sarco has a ton of other cool and odd things to spend a good amount of time wandering around and looking at.

Share this post


Link to post
Share on other sites

I have a pretty desirable SKS(Norinco paratrooper with spike bayonet and folding stock) that hasn't been shot in awhile... was thinking of selling but it wouldn't be cheap... Give me a shout if you're interested.

Share this post


Link to post
Share on other sites

I was at Butch's Gun World today, they had a Chinese SKS on the rack with an aftermarket stock on it and no bayonet, they wanted $300 for it.

 

I picked up a M44 Mosin instead of that today. Figured y'all would want to know about it.

Share this post


Link to post
Share on other sites

I was at Butch's Gun World today, they had a Chinese SKS on the rack with an aftermarket stock on it and no bayonet, they wanted $300 for it.

 

I picked up a M44 Mosin instead of that today. Figured y'all would want to know about it.

 

How much for the M44?

Share this post


Link to post
Share on other sites

How much for the M44?

 

$325 I paid for it, tag said $350. 1945 Izhevsk, with the laminated stock.

 

They had a 1955 Izhevsk there too, tag said $300.

 

Butch's is 45min south of me, but I really love going there versus Bob's, which is 10 minutes away from me. Butch is a good guy.

Share this post


Link to post
Share on other sites

$325 I paid for it, tag said $350. 1945 Izhevsk, with the laminated stock.

 

They had a 1955 Izhevsk there too, tag said $300.

 

Butch's is 45min south of me, but I really love going there versus Bob's, which is 10 minutes away from me. Butch is a good guy.

 

ouch!

 

$169 @ aimsurplus, plus whatever your ffl transfer fee is ( 40-60$ )

 

http://www.aimsurplus.com/product.aspx?groupid=628&name=Russian+Mosin+Nagant+M44+7.62x54R+Carbine

Share this post


Link to post
Share on other sites

ouch!

 

$169 @ aimsurplus, plus whatever your ffl transfer fee is ( 40-60$ )

 

http://www.aimsurplu....62x54R+Carbine

 

Hard to buy it for $170 if it's sold out.

 

Average going price for the Russian ones on Gunbroker are right around what I paid, prices on those damn things just keep going up. Chinese T53's are going for about half that price.

 

http://www.gunbroker.com/All/BI.aspx?Keywords=m44&MinStartingBid=0.01&Tab=1

Share this post


Link to post
Share on other sites

the m44s at aim go in and out of stock every week or two, i got an email the other day saying they will be coming back in stock very soon.

 

Snap as many as you can up for that $170 and resell them on Gunbroker for $300 a pop then.

 

Prices on the damn things just keep going up. I figured I'd get one before they get priced to stupid absurd levels, like American milsurps already are at.

Share this post


Link to post
Share on other sites

I have an extra Russian SKS I may sell... shoot me a pm.

 

Typical, most Yugo, Polish, Russian SKS are fine. The tricky ones are the Chinese, some of which come with removable mags.

 

Have not priced them out recently.

Share this post


Link to post
Share on other sites

It was my understanding that the Yugo SKS has a folding bayonet and a grenade launcher and is not NJ compliant, I have one and it is fun to fire and moderately accurate. I bought one NIB for under $200 three or four years ago, haven't fired it in two years since it is a pain to reassemble the trigger mechanism.

Share this post


Link to post
Share on other sites

It was my understanding that the Yugo SKS has a folding bayonet and a grenade launcher and is not NJ compliant, I have one and it is fun to fire and moderately accurate. I bought one NIB for under $200 three or four years ago, haven't fired it in two years since it is a pain to reassemble the trigger mechanism.

 

This is incorrect. So long as the SKS retains the original fixed internal magazine, it is perfectly legal.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By rifleman
      Model 1891 Argentine Mauser 7.65 x 53 with bayonet. Not an exact match but fits pretty good. This fine weapon is an engineering marvel well over 100 years old. Ramp sight to 900 yards for harassing fire to prevent free movement in the enemy's camp. Steel is in pretty good condition. All threads have been lubricated and work fine. Crack in upper handguard & the stock was secured with 2 screws. I have shot this many times and he is a beast. If your'e looking for a shooter, Boyd's has replacement stocks and you can take your spot on the line with fine German craftsmanship.
      Barrel has all the right stamps and marks according to several articles.
      I had this gun for 35 years and time for a new home. I used to display it in my office with the bayonet but it looked way too scary.
      22 boxes (440 rounds) of new ammo included. They go for $40 per box now! 
      Rifle, bayonet (with metal sheath) & ammo $450 or trade for 12g target ammo/silver. I can bring it to Central Jersey Rifle Pistol Club for inspection.
      First reply I'll take it gets the prize


    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By salvatorejrc
      I just got my FID for long guns, although I don't know anything about guns or ammo. What is a good gun to get my hands on that will help me learn more but won't break the bank, at the same time being ideal at home defense?
    • By Henry1111
      WTS 30-06 Winchester SXR, new, never used, scope bases not mounted yet. Price $680 or BO



  • Posts

    • Boom! Today all Newton is in the high $3.60s. All hail Bidenomics! And all that Alaska land he just took off the list of oil prospects.
    • I have a like new (only zeroed) PSA Sabre KAC M110 Clone in 7.62x51mm. This is PSA's clone version of the infamous Knights Armament M110. Very high quality, excellent 2 stage trigger, 20" chrome lined barrel, adjustable gas block, and is NJ legal with a pinned Surefire SOCOM muzzle brake.  Radian Raptor charging handle and Radian ambi safety. Upper and lower are billet receivers compatible with all KAC SR-25 and LMT MWS/MARS-H pattern receivers.  Im no where close to being a long range shooter but ive been able to get 0.7 MOA out of it with 175gr federal gold medal match ammo and Im sure the rifle is capable of much better accuracy. Asking $1650 (which is a steal for what you get) at any FFL thats a reasonable distance from Jersey City. I can also ship but that would be on your dime.  Optic/bipod etc not included but can be purchased if interested. Vortex Razor Gen-II HD 3-18x50 FFP with the new EBR-7C MRAD illuminated reticle in a 1.54 reptilia mount. Id include the optic for another $1700. Happy to answer any questions or provide more pictures. Not interested in any trades. Thank you.
    • Selling 1 sealed spam can Romanian 7.62x54r ammo containing 440 rounds. 1982 manufacture.  Steel core light ball, copper washed steel case.  Not reloadable.  Corrosive primer. The rust you see on the top is light surface rust. Can is intact.  Comes with opener. $285.00 cash.  I live in NW Burlington County, and work in Trenton.  I can meet you at a reasonable distance to make sale.   The first to reply “I’ll take it” wins the sale. 
    • Still want to put your dog in kennel? https://newjersey.news12.com/police-crews-rescue-46-dogs-from-fire-inside-pio-costa-industrial-complex-in-fairfield
×
×
  • Create New...