Jump to content
9X19

WTS Magpul PMAG & Arms-n-Ammo AR mags-cheap

Recommended Posts

Leaving the AR platform for now, so I have 8 brand new AR mags that I would like to sell in 1 shot.

Here is what I have left, all are brand new. All are NJ legal and permantly pinned from the MFG.

 

1-Magpul Pmag Black 30 body pinned to 15 w/Ranger plate- (new)

1-Magpul Pmag Black 30 body pinned to 15-(new)

2-Magpul Stubby Black -pinned to 15 (new)

3-Arms-n-Ammo gray 20 body pinned to 15 (new)

1-Arms-n-Ammo Black 20 body pinned to 15 (new)

 

I would like to sell all of these in one shot as a lot of 8 mags for $90.00

Comes to $11.25 a mag.

Prefer face to face, maybe RTSP?

post-4097-0-73588400-1341536409_thumb.jpg

Share this post


Link to post
Share on other sites

.308 Springfield M1A Scout.

 

Fun gun (i have one) and fun round. I hope you reload or are wealthy. :)

Surplus ain't cheap any more. I bought a PTR91KC just so I.can blast steel cased 308 through it. M14s don't like anything but brass. I have found my Scout likes the lighter grain ammo best. I save 168grain for my bolt action.

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By My1stGlock
      Searched this forum but didn't see anything on this yet.
      Has anyone played with the Magpul DAKA grid organizers yet? Seems nifty but anyone has one that can provide feedback on them? Losta vidoos online. Yer thoughts
      I know some will say $130 for Styrofoam? I guess it's just the modularity that appeals to me. Got a Pelican 1720 for Christmas and was looking at the closed foam option and ran across this too.
      https://magpul.com/daka-grid-organizer-pelican-1720.html?mp_global_color=118

       
    • By ChrisS
      Savior Equipment American Classic Tactical Double Long Rifle. 36” Model. I bought this from Amazon along with the single rifle case to decide which I liked better. I don’t feel like going through the hassle of returning as it was bought through a third party seller so I figured I’d knock 43ish%  off the price ($70.36 incl tax) and pass it along to someone here that could use it. As new condition minus the tags. $40 cash and pick up in Freehold. 
       
      ******  The first to post "I'll take it" establishes the buyer. If there are issues and the deal falls apart, the item may be re-listed. ****

    • By My1stGlock
      Have some items that I either bought new and never used or used and ended up going with another option. All NEW items in the original boxes used items are like new condition unless indicated. What you see in the pics is what you are getting. I will list all the new items first then the used items. SOLD items will be marked as such. 
      I will meet in Marlboro, Howell, Manalapan, Matawan, Old Bridge and East Brunswick or ship your cost. If you are nearby PM me and maybe we can meet up. 
      Payments will be either via cash F2F or PayPal and Zelle if shipped. 
      NEW Magpul Angled Fore Grip in BLK $25
      NEW Magpul Angled Fore Grip in GREY $25
      NEW Magpul M-Lok Rail Cover Type 2 in BLK, THREE for sale SOLD
      NEW Magpul M-Lok Rail Cover Type 2 in GREY, THREE for sale $12/ea or $33 for all
      NEW BCM Gunfighter VLTOR Mod 4 Med Charging Handle SOLD
      NEW Fail Zero M16 Nickel Boron BCG $160
      NEW Bastion US Flag AR15 trigger guard BLK $16
      NEW Forward Controls Enhanced Mag Release Ambi Extended $70
      NEW BCM Gunfighter KMSM KeyMod QD Sling mount , TWO for sale $18/ ea
      USED Magpul ACS Mil Spec Stock in BLK previously pinned near friction lock $75 LIKE NEW comes with Magpul sticker too. 
      USED Magpul  MOE 1911 grip panels in FDE $15 LIKE NEW
      USED Magpul MOE handguard carbine length in BLK $20 LIKE NEW
      USED Mission First Tactical Battle Link Mil Spec stock in GRY previously pinned near spring mechanism $40 LIKE NEW
      USED Seekins Ambi Safety selector in FDE but looks more like gold to me $30 LIKE NEW
      USED La Rue Trigger Action Chassis $8 LIKE NEW
      USED Butler Creek scope cover rear #19 EYE $8 LIKE NEW 
      USED Butler Creek scope cover front #31 OBJ $8 LIKE NEW
      USED Yankee Hill Machine AR15 EZ Pull take down pins $10 HAS WEAR
      First to POST "I'll take it" followed by PM will get first dibs and sale. I may take some time to reply but will honor the order of the posts w/ PM.
       
        











       


       


       
       
    • By JT Custom Guns
      Troy PAR    (Pump Action Rifle)
      .300 -or- .308
      New in Box
       
      FEATURES:   -16" Melonite barrel -Troy Mid-evil Flash Hider -Fully Adjustable Troy Battleaxe Mil-Spec stock -Alpha-style handguard with full-length top rail -Troy BattleAx control grip -Standard trigger -Billet machined railed flat-top upper receiver -Billet machined lower receiver -M4 feed ramps -Mil-Spec hardcoat anodized finish -Manual lever safety with indicator markings on both sides of receiver -Full Size 10 round magazine   100% NJ & NY legal Cal for best P&A

      100% NJ & NY Legal AR - Threaded BBL.,Flash Hider, Adj. Stock, ect.


  • Posts

×
×
  • Create New...