Jump to content
Old Dog

This is why everyone should have a revolver

Recommended Posts

I am typing this with one hand, perhaps something more familiar to those who have not been typing since they were 10 years old.  The day before my birthday my left hand started hurting enough for me to stop using it. I could not extend my fingers or make a fist. My guess is that between work and blogging, I was spending too much time at the keyboard combined with an extensive shooting session.  I did my usual web research and came to the conclusion it was tendonitis, a condition that would require taking an over the counter inflammatory and using ice packs. Seems to be working but it got me started thinking about something I have written about; why all seniors should have at least one revolver.

 

In gun forums I have often spoken about having a revolver in your arsenal for those occasions when you do not have the use of both hands. For us older gunhands, those occasions seem to come suddenly and all too often. I normally have problems with my hands due to nerve damage and arthritis. Tendonitis is something new and a great birthday gift to remind me that each year is not making me stronger and better. However, I plan for such events and had my trusty J-Frame snub nose ready to go. I loaded it with some mild Hornady FTX 110 gr. .38 spl ammo and was good to go. I could even reload it. Using a semi auto was out of the question as there was no way I could rack a slide and press a magazine or slide release. Be prepared, and I was.

 

I just wanted to post this reminder for older shooters that if you can afford more than one carry gun and holster, one setup should be suitable for those times when medical problems prohibit carrying your primary gun. A snub nose and pocket holster is a great setup for those times and something everyone should consider. I have to keep this short as it is slow going for me to type like this and my left hand keeps wondering to the keyboard undoing all the healing it has undergone. Something to think about whether it is hand problems, bad back (I have both), etc.. A simple, lightweight easy to use gun that will not strain any part of your body that you carry it on, is always a good idea for seniors.  Even with one hand I was able to load it by laying it down and that reminded me of why I keep it handy. It even makes a good primary gun for seniors and is very popular with the retired LEO I know. I cannot imagine trying to clear a jam in a semi auto with the condition of my hands today so I am comforted by my revolver; well two actually since I bought the Alaskan to use as a backup home defense gun which it is now is doing. I planned ahead just in time. I have it stoked with .45 LC self defense rounds but if a bear tries a home invasion I am ready with a box of 20 .454 Casull. That reminds me, I have to cancel my range trip this week where I was going to shoot the .454 Casull for the first time. Best to wait until I can use both hands and then post the results on my blog.

Share this post


Link to post
Share on other sites

Agreed.  As folks get older, racking that slide becomes much more difficult to do.  Beretta used to sell a handgun where you could load a bullet into a hinged barrel, and then it would operate as a normal semi-auto.  This got around needing to rack it.

 

IMO, a revolver is easier.

Share this post


Link to post
Share on other sites

Thanks for sharing - although there are ways to rack the slide on a semi-auto one handed.

 

Ironic that your one handed "disabled" typing is far better than most do with both hands...

...perhaps the Gentleman used another appendage...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

...a foot perhaps...

Share this post


Link to post
Share on other sites

Or you could rack the slide like Tom Cruise did in Valkyrie where he placed the top edge of the slide against the edge of a table and pushed down. Thought that was pretty clever when I saw the trailer. His character only had one arm or the use of one arm.

Share this post


Link to post
Share on other sites

I teach my guys one handed drawing, loading, shooting, and malfunction clearing with an auto pistol. We do it both strong and weak handed. It is fairly easy and with practice pretty quick.

 

How do you reload a revolver with one hand?

Gunforhire Urban Pistol teaches a pretty thorough way of loading a semi one-armed.

 

I am waiting for the one-armed revolver reload instruction, also.

Share this post


Link to post
Share on other sites

 

How do you reload a revolver with one hand?

Throw the empty revolver and grab another revolver.

I have had a few students, female and those with medical issues, who like a revolver better for the same reasons.

Good luck with the hands.

Share this post


Link to post
Share on other sites

Ahhhh, the "NY Reload".....

 

Two revolvers - that's what, 11 rounds on average with the "reload" (a 6 shot primary carry gun and a 5 shot backup) or maybe as many as 16 if you are carrying two 8 shot revolvers.

 

A Glock 19 shooting a relatively mild 9mm load will give you 16 rounds of easy shooting with no reload. After those 16, you can still skin a backup blaster if that is your plan and are so equipped.

 

If you don't have a backup to pull, Semi-Autos have a fairly straight forward manual of arms for one handed reloading:

 

1) Drop the empty mag

2) Holster

3) Grab fresh mag with shooting hand

4) Insert mag using the holster to push against when seating the mag

5) Draw and hit slide release or racket catching the rear sight on your belt/holster/nearby surface

 

And as a bonus the one reload will give you another 15 rounds (assuming aforememtioned G19). That would take 3 one hand reloads with a revolver.

 

This along with malfunction clearing, making ready, unloading, etc... (with either your strong or support hand) can be taught and reinforced to a competent level to most people in under an hour.

Share this post


Link to post
Share on other sites

I teach my guys one handed drawing, loading, shooting, and malfunction clearing...

 

Malfunction?   You're going to have to explain that to the revolver shooters.   They've probably never encountered one.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By Trader979
      Smith and Wesson 357 Magnum 686P (7 shot) 4” revolver. Excellent condition. Includes case and all paperwork.  $650 or best offer. Monmouth County.  Cross posted. First person to say I’ll take it. Sale will comply with all NJ and federal laws. 






    • By Ballard
      For sale never used cylinder for a rough rider single shot revolver in 22 magnum. I got a gun with two swappable cylinders but never got mag ammo and don't have the gun anymore, so it's brand new. As I understand you can swap it into any 22lr rough rider to make it a magnum, but confirm this yourself. Heritage sells them for $29.99 (plus tax & shipping I assume). Willing to ship but you pay.
      https://www.shopheritagemfg.com/cylinders/heritage-22wmr-cylinder-black-6-shot-331-0002-01
       
       


    • By My1stGlock
      Anyone knows of a reliable gun smith or armorer that can swap a barrel on a S&W 686+ revolver? If you used them even better. Any idea on the cost to do the work? Obviously someone local in NJ as the first choice. Thanks for any leads. 
    • By Maksim
      Finally had the chance to spend a good amount of time with the gun.  At this price point, there is no reason not to get one!
       
    • By alec.mc
      ICORE ( International Confederation of Revolver Enthusiasts ) Is hosting their Championship match , The IRC - At Ontellunee Rod and Gun Club, New Tripoli PA on Sept. 12th - 15th 2019
      ICORE is a Revolver only competition that implements time plus scoring on NRA D1 targets. It's " Run and Gun " format is similar to USPSA / IDPA but only features 4 revolver only divisions which are comprised of:
      Open - Anything goes, red dots, ported barrels, 8 shot revolvers
      Limited - 8 shot revolvers , Iron sights , no barrel ports / comps
      Limited 6 - 6 shot moonclipped guns, Iron Sights 
      Classic - 6 shot speedloader guns, Iron sights.
       
      There is room for all levels of competitors in ICORE, you can learn more about ICORE @ www.icore.org or feel free to chat with me about the match or sport. There is also an ICORE Facebook group with lots of useful information @ https://www.facebook.com/ICOREshooting/
      If you'd like to register for the match you can do so at https://practiscore.com/icore-2019-international-revolver-championship-irc/register?fbclid=IwAR2H9MJoNZl7mKxthg9GuHtzyF3AGW1P-GB5m8UuOjB2191wYcmXMi2nsI8
       
      -Alec McMahon
      ICORE Board of Directors North East Region. 
       
       
  • Posts

    • PX4 Full Size 9mm. Upgrades include: - Type G Stealth/Low Pro Levers and Slide Release - Truglo Tritium Pro Sights, White Outline Front Sight - Beretta Competition Trigger Group - LTT Optimized Trigger Bar - PX4 D Spring All parts professionally installed by gunsmith. Pistol has 400rds through it. All original parts (trigger group, trigger bar, Type F levers, etc) are included in sale. Original Beretta case and all contents included in sale. 3-10rd mags (these are the original mags that came with it). Pistol is in Excellent condition, there are a couple minor smudges on the lower part of the slide near the frame which I guess is from the sight vise. If I didn't point them out you wouldn't even notice. Trigger is super sweet, especially the SA Reset. Between the gun, parts, and gunsmith labor I have about $1200 into it. $800 Sale is Cash Only.   I'm in Whippany near Morristown. I will travel within a reasonable distance to meet at your preferred FFL to do the transfer. Buyer pays transfer fees.   ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  
×
×
  • Create New...