jrfly3006 42 Posted July 29, 2016 So I'm into a new upper build centered around a 16" middy barrel with lopro gas block. Don't want quad rails..more of a round 12-13" Midwest industries Gen 3 type. Looking to stay sub $200. What are you guys using and what do you like? Also not sure whether to go Keymod or MLok. Would be mounting a light with remote activation and grips. Thx all! Sent from my SM-G920V using Tapatalk Quote Share this post Link to post Share on other sites
High Exposure 5,635 Posted July 29, 2016 If you are installing a barrel nut during the assembly process than the ALG EMR V2 MLOK - around $145 - is the way to go. http://algdefense.com/ergonomic-modular-rail-v2-m-lok.html 1 Quote Share this post Link to post Share on other sites
Vlad G 345 Posted July 29, 2016 Tools in a toolbox. On my race gun I have a carbon fiber one, on my zombie rifle a Troy TRX. We live in the golden age of hanguards, there are so many good, light, and affordable options now it is almost about what looks good to you. I've been eyeballing on one the 15 Midwest ultra light mlok handguards to replace my CF one as they weight just as much and have more options. edited to add: this is the one I'm tempted by right now: https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=2548 Quote Share this post Link to post Share on other sites
Heavyopp 167 Posted July 29, 2016 I just used one of these --https://geissele.com/13-super-modular-rail-mk4-m-lok.html It's not exactly round but it does have a good feel in the hand -- 4 short rail sections on the end for accessories -- the barrel nut and way it all hooks up are exceptional You do have to wait for a holiday to purchase -- Geissele usually runs 25% off sales for the holidays -- primary arms/ rainier arms had this for the 4th of July at $187 -- Rainier had free shipping 1 Quote Share this post Link to post Share on other sites
Contrvlr 17 Posted July 29, 2016 I just used one of these --https://geissele.com/13-super-modular-rail-mk4-m-lok.html It's not exactly round but it does have a good feel in the hand -- 4 short rail sections on the end for accessories -- the barrel nut and way it all hooks up are exceptional You do have to wait for a holiday to purchase -- Geissele usually runs 25% off sales for the holidays -- primary arms/ rainier arms had this for the 4th of July at $187 -- Rainier had free shipping Geissele had a 50% off blem sale on July 4 , got a 13" Mk2 for $112.50, still haven't found the blemish and not having to time the nut is priceless Quote Share this post Link to post Share on other sites
Heavyopp 167 Posted July 29, 2016 Geissele had a 50% off blem sale on July 4 , got a 13" Mk2 for $112.50, still haven't found the blemish and not having to time the nut is priceless 50% off-- I didn't see that one... Quote Share this post Link to post Share on other sites
MartyZ 691 Posted July 29, 2016 I'm partial to the samson evolution line, they are a bit pricey though and use a proprietary rail system, but they use standard barrel nut. the EX line is also specifically designed to work with a piston system butting up exactly to a railed piston gas block. Quote Share this post Link to post Share on other sites
GramGun79 226 Posted July 29, 2016 I still love BCM KMR http://www.bravocompanyusa.com/BCM-KMR-KeyMod-Handguard-s/184.htm Quote Share this post Link to post Share on other sites
Mr.Stu 1,884 Posted July 29, 2016 I have the AP Custom carbon fiber tube. Standard barrel nut but seems to be discontinued https://www.midwayusa.com/product/3139375230/ap-customs-tactical-free-float-tube-handguard-ar-15-carbon-fiber-black Quote Share this post Link to post Share on other sites
n4p226r 105 Posted July 29, 2016 I love the noveske NSR or SMOS version if you want mlok. Quote Share this post Link to post Share on other sites
Scorpio64 5,120 Posted July 29, 2016 If you are installing a barrel nut during the assembly process than the ALG EMR V2 MLOK - around $145 - is the way to go. http://algdefense.com/ergonomic-modular-rail-v2-m-lok.html I just put a 12" EMR V1 on my SPR. It looks fantastic. A bit thinner than the DPMS tube that was on it, so I may have to put an angled foregrip on the rail to keep my hands from getting cooked. Quote Share this post Link to post Share on other sites
Vlad G 345 Posted July 29, 2016 I have the AP Custom carbon fiber tube. Standard barrel nut but seems to be discontinued https://www.midwayusa.com/product/3139375230/ap-customs-tactical-free-float-tube-handguard-ar-15-carbon-fiber-black AP is out of business, sadly. That is what I have on my race gun. Quote Share this post Link to post Share on other sites
jrfly3006 42 Posted July 30, 2016 The Geissele and Midwest G3 both look like they'd fit the bill..whats the consensus on MLOK vs Keymod...any inherent advantages to either?..I've havent used either yet Sent from my SM-G920V using Tapatalk Quote Share this post Link to post Share on other sites
Vlad G 345 Posted July 30, 2016 In my opinion, if you are not already invested in one I would pick mlok because it doesn't look like a shelving unit. I don't think it really matters. 1 Quote Share this post Link to post Share on other sites
Heavyopp 167 Posted July 30, 2016 In my opinion, if you are not already invested in one I would pick mlok because it doesn't look like a shelving unit. I don't think it really matters. Agreed -- I hate the look of keymod Quote Share this post Link to post Share on other sites
High Exposure 5,635 Posted July 30, 2016 The Porn industry chooses MLOK: https://primaryandsecondary(DOT)com/mlok/ Remove (DOT) and replace with . This seems to be a current hot debate: Magpul M-LOK – Modular Locking accessory mounting system VERSUS Bravo Company KMR – KeyMod Rail system The science is fairly straightforward…M-LOK has more surface area, thicker edges (no 100 degree cone cut) so more material behind the slots, flat on flat engagement, and all the things discussed in the M-LOK FAQ on the Magpul website. KeyMod was an evolutionary step into negative space attachments, or at least a slight change of AI KeySlot, but just wasn’t designed by an engineer or with engineering behind it with all of the material considerations in play. Some folks are happy with KeyMod mounting lightweight accessories without much abuse, and that’s cool. Heavier stuff, high round counts, and generally treating the rifle like a tool ends up being really, really hard on KeyMod, and things can get loose, seats creep and crush, etc. The pullout, drop, high round count firing, shaker table, leveraged pullout, etc testing of initially KeyMod, and then KeyMod vs M-LOK was what led down the path to release M-LOK in the first place. Colt CA and other MFG have done their own evaluations, and that’s why you saw a lot more M-LOK at SHOT this year. A bunch of other entities have adopted or ordered M-LOK as the solution of choice, and some additional third party testing is currently underway, so when all that comes out, you won’t have to take anyone’s word for it. That’s the way I see it. There is a thread in the P&S Pro Facebook group that has it straight from the horse’s mouth on some of the shortcomings I’m talking about that started the professional user pendulum swinging away from KM. The easiest way to describe this battle: VHS versus Betamax and the porn industry is choosing M-LOK. Quote Share this post Link to post Share on other sites
shooter28 153 Posted August 1, 2016 I love my larue tactical handguard. I believe its the 9" version Not really a help but the handgaurd that comes on the Larue PredatAR rifles is my favorite by far. Quote Share this post Link to post Share on other sites