Bagel51 0 Posted April 6, 2017 I have a 303. I inherited a 303 it was missing the bolt and mag. I bought a bolt and a mag Now I want to get it checked out and see if its safe to fire. Any suggestions on where to go or what I can do on my own. Quote Share this post Link to post Share on other sites
Bagel51 0 Posted April 6, 2017 I can look at it for you..... first thing head space check PM sent Quote Share this post Link to post Share on other sites
Blueskybob 12 Posted April 6, 2017 I can look at it for you..... first thing head space check +1 on the guys at Mastodon! They helped me with a couple of Enfields. Quote Share this post Link to post Share on other sites
bad64chevelle 0 Posted April 12, 2017 There's a guy at Cheyenne mountain in Bordentown , I can't remember his name , that works behind the counter whose real into milsurp and was VERY knowledgeable in enfields . For the life of me I can't remember his name . He would be a good one to start with if you're local to that area. Quote Share this post Link to post Share on other sites
Bagel51 0 Posted April 12, 2017 Ok thanks. I'll have to take ride over there. Cheyenne is close Quote Share this post Link to post Share on other sites
bad64chevelle 0 Posted April 12, 2017 I have his name written down on a card at home . I will take a look and see if I can find it for you. He was very helpful on some questions I had with mine . Good luck ! Quote Share this post Link to post Share on other sites