some pics

Two vids

shooting it pt 1

shooting it pt 2

Overall i am Happy! Out of 200 Rounds shot today only had two non fires, after striking each round 3 times each to get it to fire, came to the conclusion its not the rifle but the round/primer issue as all the other went off with ease.

I read alot of ppl saying the 7.62x39 AR's were "problem Childs" but i didnt have any problems. Just do your research. :-)

If you catch me at the range dont be skerred come say hi. im friendly ;-)

Parts List:

• Upper Receiver

• Barrel

• Gas System

• Hand Guard

•  OMEGA / VECTOR END CAP
• Shark Muzzle Brake - 5/8" x 24 TPI

First I Bought my upper from MAS Defense website. Took it to my gun shop to pin and weld the Muzzle Break As NJ Law.

Went to Gander Mountain Store Closing and picked up a nice 2.5 MOA red dot scope

Heres what it looks like it on the upper and upper on the lower

Looks pretty darn good! :-) But The upper needs some customizing done to it to fit the FDE Theme. And So Time for paint.

First I taped everything that i dont want to be FDE color.And stuffed Cotton Squares the things ladies use to remove makeup. to protect the barrel and gas tube. worked great!

Since i couldnt find any FDE sprey paint and had the Model Master FDE paint left over i said lets brush it on. Worked good on the lower parts :-)  So i painted the left side of the Handguard.

2 coats on let dried for 24 hours then i removed the tape. Sorry didnt take pic of that part. but i liked how it came out for being brushed on So on to the right side and some Upper accents parts

Painted the Dust Cover and the Forward Assist

2 coats let dry for 24 hours before removing tape. Installed it on the Lower.

This is the Paint i used

I Love How it all came out! I have seen either Black Handguard or FDE color Handguard but never both. I Didnt want all black or all FDE color So i Painted the Handguard myself and glad i did. Makes it stick out from the rest of the AR-47's Handguards :-D Up close you can see in some spots that it was brushed on but other then that it looks great! Love it!

Next up Is the BCM, Charging Handle and Mags. Then Ammo and to the RANGE!!!!!!!!!!!!! Im 90% done with the build. :-)  Well i Hope Y'all Like my build so far. And maybe this gives you some ideas on colors or themes or just like thats a sweet AR :-D I Will update Y'all when i get the rest parts and then take it to the range. *PEW*PEW*PEW*

Parts  Installed:

First i bought the Anderson AR-15 Stripped Lower Reciever.

Then I Installed the Magpul Polymer Trigger Guard, Flat Dark Earth

I Bought the CMMG Lower Parts Kit

And since i am going for A FDE Theme, I Decided to paint the Mag catch, Mag Release Button,Safety Selector and the Take Down pins.

3 Coats of white primer.

Then after 24 Hours dry time i painted them with Master Model enamal Paint in Flat Dark Earth

Then I color Filled the Markings on the Lower Receiver.

After All the paint had 24 hours to fully cure I started installing the Lower parts kit into the lower Receiver

After Installing all the lower parts kit and the CMMG Lower Parts Kit, Magpul Polymer Trigger Guard, Flat Dark Earth,UTG AR15 Ergonomic Pistol Grip, FDE, AR-Stoner Buffer Tube Assembly 6-Position Mil-Spec Diameter AR-15 Aluminum Black, Magpul Stock MOE FCS Fixed Carbine AR-15, LR-308 Carbine Synthetic, Phase 5 Weapon Systems Inc Extended Bolt Release V2

Next Onto The Upper Part. If you like it so far stick around to see it finished. Thanks for reading my first blog. :-)