Taylor Ham

Custom Radian Model One 6MM ARC with a Custom KREIGER BARREL. I am selling the complete package well north of 6k in total cost as a complete package. I have the invoice for the Custom Kreiger barrel ,Stock , BCG, and Brake priced at 2k roughly. Everything in the pictures is yours, this rifle we destroy anything out there with Sub MOA accuracy with this barrel with the Radian Model one as a Host. I will include the original Radian 16 Match Stainless barrel , BCG and Stock with a couple of hundred rounds of 6MM ARC Hornady Ammo KREIGER BARREL SPECS AND ADD ON’S Proprietary 18" Krieger Blank 6mm ARC Ultra Match Barrel with Matching Ultra Match SBN Treated 6mm ARC BCG New DLD SBN Treated Gas System Needed to Replace Radians Proprietary Gas System / New DLD Buffer System with Proper Spring / New Receiver Extension Tube / New Milspec End Plate Magpul Gen3 PRS Sniper Stock - Grey - Provided & Installed Precision Armament M4A2 Severe Duty 6mm Provided & Installed 6mm ARC Specific Steel 10 Round Magazines RADIAN RIFLE SPECS Billet Machined 7075-T6 Upper Receiver w/ M4 Feed Ramps Proprietary Extended Aluminum Hand Guard w/ Magpul M-LOK® Modular Mounting System and Integrated Upper/Hand Guard Stainless Steel Anti-Rotation PIN Lightweight Forward Assist Radian Raptor-SD™ Suppressor-Optimized Ambidextrous Charging Handle Direct Impingement Gas System Billet Machined 7075-T6 Lower Receiver w/ Integral Trigger Guard and Flared Magazine Well A-DAC™ Ambidextrous Dual-Action Control Right Side Bolt Hold Open Feature Ambidextrous Right & Left Side Magazine and Bolt Release Buttons Radian Talon™ Modular Ambidextrous 45°/90° Safety Selector Radian Vertex™ Trigger OPTICS Delta Optical Stryker HD 1-6X24 30mm Scope w/ DSMR Mil. Reticle. in 0.1 Mil turrets! Made in Japan by L.O.W. Unbelievable value. Large FOV with Aimpoint bright Illuminated Center Dot with Mil hash holdovers. EOTECH EFLX RED DOT 3 MOA BRAND NEW EFLX with box and warranty. ASKING $4700.00 for the entire setup for my NJ LOCAL's. You pay for the FFL transfer and i can meet anywhere in NJ for the most part. The first to post "I'll take it" wins the sale

Hello, I am selling my Ruger 5.7(Mint Condition) with around 300 rounds of Federal and FN Ammo and two 10 round magazines. I am including everything in the photo including the mounting plate , the JP Red Dot and the Inforce Pistol Light. I have the original Ruger Case and the ammo is new in the boxes. We can meet in any FFL in NJ preferably in Northern NJ. Selling this at $550 all in, buyer pays for the face to face FFL transfer. The first to post "I'll take it" wins the sale

So can one remove the mount and or use the mount without issue ? Is that zip code near Piscataway ?

I have a Custom Radian 10.5 OTHER(Pistol) rifle with a 9MM Noveske match barrel. This is a OTHER with a 10.5 PINNED SLR Linear Hybrid Comp with a total of 26 " in overal length. Buyer has the ability to use this a OTHER (if legal in your state) Pistol or register it as a SBR per your states requirements. You also have the ability to remove the 9MM perm Mag Block and barrel and convert it back to 556 or 300 black out as the Radian build kit upper and lower are for AR 15 style. As far as this PCC this is the devil in disguise YOU WILL not find a better shooting 9MM PCC type rifle period. The applications for use of this rifle are enldess, the Noveske barrel are one of the best in the market. The barrel has barely had 500 rounds on it, and shoots MOA up to a 100 yards with out a doubt. Buyer pays for FFL shipping and buyer must comply with local state laws. This winner will get everything in the pictures including 4 Colt Steel 9MM 10/30 Mags long and 4 shorty Colt 9mm 10 round mag total of 8 mags. I am in Northern NJ and will meet at local FFL in Pinebrook, or of your choice. I am asking for $2000 cash (no trades price is firm) or electronic transfer via Apple pay or your payment method. ,This new price will not include the OPTIC AND KAC RISER, everything else you see you get. This is well north of 3k plus when you add up what you have, making room in my safe. The Build and whats included. RADIAN BUILDERS KIT 1x Billet Upper Receiver w/Dust Cover, Anti-Rotation Pin & Light Weight Forward Assist Installed 1x Hand Guard w/Magpul M-LOK® Modular Attachment Interface 1x Radian AX556 Lower Receiver 1x Raptor-SD Ambidextrous Charging Handle 1x Radian Talon 45/90 Ambidextrous Safety Selector 1x Ambidextrous Bolt Catch & Release 1x Ambidextrous Magazine Release 1x Enhanced Takedown Pin Set 1x Aluminum Barrel Nut 1x Barrel Nut Wrench 4x Hand Guard Cross Bolts, Washers & Nuts NOVESKE BARREL 10.5” 416R Stainless 9x19mm with 1:12 right hand twist • Barrel extension w/extended feed ramps • ½” x28 muzzle threads • Weight is 18.5 oz ATC AR GOLD TRIGGER 3.5 lbs. (Fixed Weight) Drop Safe Drop-In Module (easy installation) Uses .154 pins Shortest Reset Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal, 6.5 Creedmoor and 9MM/PCC’s) 30 Day Money Back Guarantee Made in USA Used by Top Competitive shooters including Jerry Miculeck and Daniel Horner SLR Linear Hybrid Comp 9mm Synergy Linear Hybrid Compensator 9mm Melonite Finish 416 Stainless Steel Core with G5 Titanium Sleeve Adds 1.52" inches to barrel 1/2x28 Threading 1.25" OD 2" OAL 4.4 oz Holosun AEMS Core red dot EMS-Core-Green features Holosun’s Green Super LED and includes 8 daylight and 4 night vision compatible intensity settings, a precision 2MOA, and Shake Awake technology. A side mounted battery trays houses a 2032 battery which provides up to 50k hour battery life. AEMS-Core-Green strikes a balance between performance and features for users of any level. KAC Sky Scraper Aimpoint Micro NVG High Rise Mount By lifting the optic up higher you can clear lights, lasers and any other items that can obstruct your sight picture. With our new Aimpoint Micro NVG mount, we push the boundaries further than before. With a height of 2.33” from the top of your 1913 pic rail to the center point of your optic, you now have the ability to see your irons through the mount. We have also integrated a section of 1913 rail, so you can run Aimpoint or Eotech magnifiers. HAHN PRECISION AR-15/M16 9MM DROP-IN CONVERSION BLOCK Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral “leg” hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount.

I have a Custom FN 509 LS EDGE with a Apex Threaded Barrel and a Volker Compensator. This pistol also includes the Apex After Market Trigger(around 4 pounds or less) and Heavy Duty Apex Striker. It will come with the OEM FN barrel and OEM trigger if you would like to replace back to OEM. I am including 5 FN MAGS, all original OEM parts and the OEM FN Bag. The pistol has a Custom Cerrakote job that i can describe as Burnt Bronze over Sniper grey. The pistol shoots FLAWLESS and recoil is non existant with the Volker Comp. The threaded Apex barrel has less then 600 rounds at best, this thing shoots like a dream. Only reason im selling it is to get into the 2011 gang. I am in Northern NJ, I can meet within reasonable distance to a local FFL for transfer. If not it can be mailed but at your cost via FFL. $1575.00 NJ local pricing > Firm. first post "I'll take it"

Early Xmas gift to the lucky buyer to score a factory direct KAC SR 15 rifle. The rifle has zero rounds and comes P/W with a Break and pinned stock. Giving my Jersey folks a shot as i just listed at GB but will take a couple bucks off for Jersey sale. Can ship to FFL and or Drive down to FFL depending on where you live . I will include the original KAC Flash Hider TO sell at your discretion. Willing to do other options of payments such as Pay Pal Friends and Family discreetly and your standard USPS Money Orders, personal checks etc and of course cash(checks must clear before shipping). All sales are final, asking $3600 no trades. I'll take the lost on the mandatory P/W and all the compliance work done. See description below, The SR-15 E3 Mod 2 series’ 5.56 mm NATO barrel is manufactured for military grade durability, and is free-floated inside a URX4 M-LOK handguard. An improved E3 round-lug bolt design both enhances function and increases bolt life far beyond the industry standard. The ambidextrous bolt release, selector lever, and magazine release offers left-handed users the ergonomic advantages inherent to AR15-based controls. The drop-in two-stage trigger serves double duty as an aid to precision marksmanship while enabling surgical speed shooting at close range. The 5.56 mm 3-Prong Flash Eliminator(REMOVED from Rifle AND WILL SHIP WITH RIFLE) interferes with propellant gas combustion forward of the muzzle to significantly reduce flash signature, will not ring upon firing or when struck, and is compatible with the Knight’s line of 5.56 mm QDC Signature Reduction Devices. First "I'll take it" followed by a PM or Emails takes it.

SOLD OK TO DELETE,

So the brace that been a hot topic is a SB Brace from SB Tactical. The brace that i have is from Gear Head Works called the Tail Hook mod 2. I haven't really seen any mention of this one in particular, but you can check out sites for that if you need. Personally i think the talk of braces are cooling off, but thats my opinion. I actually just purchased a "OTHER" from Delta Level Defense, this is why i am selling the Mod Mat. So i think the ATF stuff is mostly about AR Pistols using the SB Brace, but again my opinion. I stated to another user on the forums that i will be removing the listing by next week. So just an FYI, if you're interested.

Price reduced, selling entire kit for $1700, or $1200 for Rifle only. am selling my Modern Materiel SBF "OTHER" and all accessories. The kit would come with Firearm, Case, SUREFIRE WAR Compensator, Cloud Defensive Rein Mico light(complete kit) Vortex 3X Prism scope and 11 Lancer Mags 10 round. The firearm fires great with pretty little kick , i am selling to justify recent order i placed. I am located in Northern NJ and can meet for drop off to FFL of choice and or i can mail it out to FFL. The asking price is $1700 for everything , i can possibly accommodate removing some items to drop price. Must have matching FID and photo ID, All FFL's fee's to be provided by buyer when possible. First "I'll take it" followed by a PM or Emails takes it.

Hello I am selling my Modern Materiel SBF "OTHER" and all accessories. The kit would come with Firearm, Case, SUREFIRE WAR Compensator, Cloud Defensive Rein Mico light(complete kit) Vortex 3X Prism scope and 11 Lancer Mags 10 round. The firearm fires great with pretty little kick , i am selling to justify recent order i placed. I am located in Northern NJ and can meet for drop off to FFL of choice and or i can mail it out to FFL. The asking price is $1600(removing posting on the 26th) for everything , or the rifle only $1000. Must have matching FID and photo ID, All FFL's fee's to be provided by buyer when possible. First "I'll take it" followed by a PM or Emails takes it.