jruch87

Mines still available.

Bump

Looking to sell my Remington 700SPS Tactical .308 with Leupold VX-R Patrol 3-9x40 TMR Firedot. Gun is chambered in .308 and has 20in barrell. I bought it used so the round count is unknown but is believed to be low. The attached bipod is unmarked and the brand is unknown. The scope has Butler Creek flip up lens covers. I do not remember the brand of the scope rings but they are a quality manufacturer. Also included is 135 rounds of .308 match ammunition. -15 rds Federal Gold Metal Match 168gr -20 rds Silver State Armory 175gr -100 rds Federal Gold Metal Match 175gr Asking $1,100. I live about five minutes from the Arsenal gun shop in Deptford, I am willing to meet at the FFL of your choice within 30 minutes of there. https://www.opticsplanet.com/leupold-patrol-vx-r-3-9x40-illuminated-riflescope.html

No markings on the barrel, it has almost a dimpled finish

I have a shotgun that I got from a neighbor several years ago following his father's death. The son knew nothing of the gun and found while cleaning out the house. It is a single shot break action, the only markings ar "IB 412" on the bottom of the receiver and the butt plate says "stevens". Its 12 guage, 30 inch barrel. I have no intention of every shooting it, however, would like to get it to a functioning condition and need a few parts. Any ideas?

I have the gear s3 frontier and usually I have to charge it every 2 days it will get closer to 3 of I dont use the GPS.

Check out https://www.safetyman.co/schedule-taser-training-and-sale. He does taser training and sales

Deuces den is about 5 minutes away on Woodbury Glassboro rd in mantua. Doesn't stock a lot but cheap transfer fees and good prices on stuff he orders for you. My change of address took about 2 months there but there's a new chief now so I don't know if anything changes. What part of Glassboro, the college is out now, but during the school year it can be a little rough if there's rentals near by.

S&W 64-4

Thanks, was hoping to find something in South Jersey but as I thought I dont think any do.

Does anyone know of a NJ gun shop with their inventory online? Want to buy something new, no idea what, and don't feel like driving around for hours trying to get an idea.

Anyone see any Kimber Solo mags in stock anywhere? Seems like everywhere is out of stock and people want ridiculous prices on auction sites. Looking for 6 or 8 rounders, if anyone sees any in their local shops let me know. Thanks

illegal, the barrel shroud(handguards) and magazine outside the grip are your two evil features

It is illegal in that configuration. What I did was take a tubing cutter like this http://www.homedepot.com/p/t/100021967?catalogId=10053&langId=-1&storeId=10051&N=5yc1vZbqjj&R=100021967#.UToDaLvLgek replace the cutting wheel with a washer and scored the magazine tube. By scoring the tube it pushes in the metal preventing the follower from passing but still allows the magazine spring to compress normally so it does not effect function. I scored the tube 13-11/16in from the end with the follower and it holds 15 rounds with hollow points and 14 rounds with lrn rounds.

I'll stop by around 11 have a 870 and 11-87 I'll bring

Thanks sjshooter Banshee maybe it's time you go in with her

I'm usually the guy who runs in, goes under, thinks it's really cold but isn't smart enough to think to run out of the water and ends up standing there for a minute or 2

Links been fixed in the original post, Thank you

For the third year running I will be participating in the 2013 Wildwood Polar Bear Plunge for the Special Olympics. For those of you who don't know the Polar Bear Plunge is simply doing the smartest thing you can do in the middle of January, go swimming in the Atlantic Ocean. The purpose is to raise funds and awareness for the Special Olympics of New Jersey. This brings me to the NJGunForums Community, I know times are tough and now is the time to buy guns and ammo, but I ask if you can donate, even if it's only $5 every bit counts. Or for the more daring instead of donating PARTICIPATE, start your own funraising page and join the effort. If you're interested in donating or participating follow the link below. Thank you for helping me reach my goal! http://www.kintera.org/faf/donorReg/donorPledge.asp?ievent=1032574&supId=348956540&extSiteType=1

There Wax-o-be in South Brunswick. I'm from the area so I've driven past but never been there so not sure if a membership is required. http://www.waxobe.com/index.html

Was removing the trigger group from my 1187 today and the feed latch fell out. I'm all my experience with Remington shotguns I've never had this part come out and don't believe it's supposed to. Anyone know how to get it back in right?

had some issues with my strion, comes with a one year warranty. Called to ask about having it repaired after I had it for almost 2 years they said send it in. Came back with a new tail cap switch, battery and led module replaced pretty much everything but the body for free. Great customer service and pretty fast too.

I used the method from the link above. I scored the tube 13-11/16in from the end with the follower and it holds 15 rounds with hollow points and 14 rounds with lrn rounds.

I believe it is minute as in time, in measurements of angle for longitude and latitude a minute can be broken down into 60 seconds same as time. http://en.wikipedia.org/wiki/Longitude if you go to the section noting and calculating it mentions this

http://palmettostatearmory.com/index.php/featured/mfs-223-55gr-fmj-zinc-plated.html with free shipping, if you're not going brass better deal than the tula, I've never shot it though