Jump to content

Old School

Members
  • Content Count

    5,691
  • Joined

  • Last visited

  • Days Won

    13
  • Feedback

    100%

Everything posted by Old School

  1. So the rules seem a little vague. BUT>>> I'd give it a try.
  2. Forget that cannelure.. Neck tension baby. Sure you want to check you're not getting set back. But don't worry about it. BTW trim you case to spec. The more neck the more neck tension
  3. PM me and I'll give you a pet load that pushes a 55gr FMJ about 2800fps fully cycles and is good for plinking. Under 1 MOA too. @Maksim BTW where are you moving to after PA puts in all their new firearms restrictions?
  4. CFE 223 measures very well out of my Dillon + - .1gr out of Ideal 55 as well.
  5. Just my 2 cents - Velocity and pressure with different powders are not a direct correlation.
  6. In the process of watching OK watched it. Yes he states perfectly clear motorization would be an NFA violation. But he's certainly given it some thought mentioning not hooking up your cordless drill to it. Of course a 12v windshield wiper motor would be a better way to go to jail...
  7. Could it be legally motorized?
  8. Ms Bossy B - I set up a table at a gun show and do voter registration. Does that work for ya? Our gun club has a "legistrative liason", Does that work for ya? My SMSgt Is VP of "Engagetheright.com". How does that work for ya? - NEVER AGAIN-
  9. Macs you can find as low as 6500 but they're kind of trash. M2 is a consideration or an AC556 if ya gonna blow the wad.
  10. I'm out of the Peoples Republic of NJ for almost 5 years now. One big downside. You can spend too much on guns. Yeah I bought cans, but now I want a sub-gun. Jeez...Can't buy much for $10k. Please keep the anti-gun libitards up there.
  11. You're measuring fully sized brass right? That's the way it's done. If it's a little short after sizing .010" is no biggy. You have a guage? Datum line to case head is my concern.
  12. Listen to Chris. Thumb in the trigger guard, retract the slide and rotate that bushing.
  13. No pissing contest here. I was standardizing on LC cases awhile ago and would do 100 cases at a clip. Quicker and a more uniform primer pocket when swaging. I use to use a chamfering tool as well. And some times I'd get a f'd up seated primer. just saying
  14. @GRIZ These may work but are not a replacement for a swaging tool.
  15. I see you’re a law abiding citizen. Poachers don’t use handguns. “Handgun hunting is allowed “. Think what ya said. Poaching is illegal
  16. Nice Ray - Bayonne is small enough that you could hit something on the other side of town with a shotgun
  17. There's a bill that will probably be defeated for Constitutional carry here. My permit was a few maybe 3 weeks. No loaded long guns because you guys are a bunch of poachers
  18. The place is a killing field for white farmers. My nurse was SA and the stories she told me. Ya think you made an understatement? Used to be a decent place.
  19. It was 90 degrees here today and you can have a handgun in your glove box or console sans CWP. And it seldom takes 90 days. Still have snow up there? Oh and BTW to knock a squirrel out of the bird feeder hold 12" high and 12" right with a 50yo Daisy mod 25 pump bb gun at 20 yds.
  20. Good advice - Though I actually take it to the UPS Shipping Center (a UPS Store won't take it)
  21. If you made me the right deal, I could right meet you right off of I-95 on your way up north... I'm in SC. Loads of FFLs and cheap OS
  22. KKM barrel cut my groups in half from a rest at 25 yds
  23. Love the TSX but be careful. I shoot 62gr TSX for medium sized gave out of a 22Nosler. Because they're pure copper they are longer per given weight than a lead bullet. Thus, barrel rate of twist needing compatibility with bullet length (not weight) may effect your accuracy. Just saying and shoot, shoot, shoot. Talk to "Bully" if you need bedding. Have fun, prepare well and "reach out and touch someone".
×
×
  • Create New...