Jump to content


  • Content Count

  • Joined

  • Last visited

  • Feedback


Community Reputation

3 Neutral


About Mr.G

  • Rank
    NJGF Regular

Profile Information

  • Gender
    Not Telling
  • Location:
    Bergen County
  • Interests
    Sport Bike, Firearms, Snowboarding
  • Home Range
    Old Bridge Rifle and Pistol Club

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Brand-new, Never used or never loaded. I only marked them for easy ID. PayPal Gift ok, will ship Priority Mail, buyer expense. $175.00 ============================= 1911 Elite Tactical Magazine, .45 ACP, Full-Size 10 Round, Black Fluoropolymer Finish with FEED RAILS™ Ammunition System Elite Tactical Magazine, .45 ACP, Full-Size 1911 10 Round Capacity, Polymer extended base pad, with FEED RAILS™ Our legendary magazines are so inherently reliable they'll make virtually ANY 1911 pistol function every time, including YOURS! This new, 10 round magazine has the strongest magazine tube available with a new patented reinforced, railed feed lip design that mitigates tube spreading common to hard-use 10 round 1911 magazines with no loss in feed reliability. Aircraft Grade Certified Stainless Steel Tube Resists Corrosion and cartridge viewing slots are at the rear to maintain structural integrity. Multi-step tumbling ensures a smooth finish inside and out. .025" Tube Walls - Thickest In The Industry and Heat Treated for Maximum Durability and Service Life Fiber-Fill Nylon Self-Lubricating ETM Follower Provides feeding and positive lock back-Extended Skirt Ensures Stability in Operation and Minimizes Creep from the Tube when the Magazine is Empty Maximum Tensile Strength Heavy-Duty Stainless steel Spring for Long Service Life, Enhanced Feeding and Positive Slide Stop Operation without fear of corrosion Removable Polymer base adds grip length for enhanced shooting and rapid reloading and is marked for magazine numbering No Other Magazine on the Market Can Compare for Proven Inherent Reliability, Durability and the Ability to Remain Loaded for Long Periods of Time Without Damage. No-Risk Service Policy - Wilson Combat will replace any magazine tube that spreads, cracks or becomes unusable during normal use. Wilson Combat magazine springs and followers are considered consumable items and may require replacing after extensive use. About the new FEED RAILS™ 1911 Magazines Because of the extra mass of the ammunition stack, the feed lips of a 10-round 1911 magazine take a significant impact when the magazines are dropped or slammed in the gun during a slide lock reload. These repeated impacts can cause your fed lips to spread over time. Folded, FEED RAILS™ reinforce this critical area without any loss of feed reliability. They are more expensive to manufacture, but testing has shown they are more durable over long-term use. The FEED RAILS™ enhanced ETM magazines are manufactured under license from CMC, LLC. THE WILSON COMBAT® ELITE TACTICAL MAGAZINE The ETM started with a blank sheet of paper and 30+ years of 1911 and 1911 magazine experience. It WILL set a new standard in 1911 magazines while redefining state-of-the-art. We've blended the latest improvements in manufacturing and materials technology with our own real-world shooting experience to provide quality, quality, and more quality. From material selection to manufacturing process to final testing - this magazine is built like your life, and ours, depended on it, as someday it may. No compromises, just stone-cold reliability you can depend on. The ETM is primarily a combat magazine, but if you're a competition shooter, you just may gain that critical advantage that will move you past the competition. The real world for a combat pistol isn't always in a dry, protected environment. So we built the ETM to be impervious to the elements. Every component is manufactured from either a high-grade stainless steel or super tough nylon. We worried about grime and corrosion when we designed the ETM, so you will never have to. The ETM has the strongest magazine tube yet developed, virtually eliminating feed lip cracking, tube spread and cracking, and general fatigue, - some of the most common manufacturing and/or age-related defects in other magazines. The engineers working on the ETM have a combined 110+ years of firearms experience - the ETM is a showcase of their knowledge. They refined the radius for each bend in the tube to take advantage of the strength in the stainless steel they selected - and then devised a manufacturing process to provide the tight tolerances required to make those exact radius bends. The observation slots, moved to the rear of the tube, are located exactly where they need to be to maintain the structural integrity of the tube for years and years of use. After extensive testing we selected a grade and thickness of stainless steel optimized to provide superior stiffness without brittleness. No matter how many times you empty this magazine through your pistol, you can be assured the engineering expertise, design, material selection, manufacturing, and the quality control behind the ETM promises a lifetime of smooth and reliable operation. ETM tubes are manufactured with a proprietary, custom designed welding process followed by a proprietary multi-step tumbling and finishing process. The internal and external finish, critical to smooth follower operation and insertion into the weapon, are the result of selecting the proper media and media-sequence in the tumbling and finishing process. We expended a lot of engineering time and expertise in developing the finishing process; when you get your hands on an ETM you'll be able to see and feel for yourself, we think you will agree it was time well spent. The improvements made to the ETM's follower and base pad have not previously been seen in a pistol magazine. This design combines advanced manufacturing technology with absolutely precise dimension control, assuring positive slide-lock after the last round has been fired. The innovative follower design with its extended skirt ensures stability in operation and minimizes creep from the tube when the magazine is empty. Super tough nylon was selected as the optimum material for the new ETM follower due to its proven durability and slick surface finish. This slick finish and the super smooth internal finish of the magazine tube result in the smoothest follower operation possible. Experienced shooters will notice this ultra-smooth performance when loading and firing. We've found a space-age stainless steel spring wire that is phenomenal for spring life. Have you ever worried about leaving your fully-loaded magazines for long periods of time? This spring, designed exclusively for our new ETM, will do its job longer than the cartridges will remain suitable for combat use. Another factor in spring life is the degree of compression when the magazine is loaded. Our engineers designed the ETM's base pad to allow a longer tube. Although the ETM is not appreciably longer than a typical magazine, it has more space for the spring to work without complete compression or excessive stress on the spring. The ETM seats and locks in the weapon with the slide down - fully loaded. The ETM's new almost indestructible base pad provides a sure grip when pulling a magazine from a pistol or a tight pouch - especially in a combat or competitive situation when seconds count in reloading. If you have ever been in the rain, trying to get a traditional magazine from a wet, tight pouch, you'll really appreciate this feature - and it might save your life. Developing a cutting edge product always has one downside, your competition WILL copy some of its unique features. We delivered our first magazine over 27 years ago, and others have copied our designs ever since. But no one, anywhere, has ever copied what is arguably our best feature; the feature that has a huge benefit for you. You can't see it in a photograph and it doesn't improve the function of the magazine. We call it the Wilson Combat Lifetime Satisfaction Policy. You get one with every Wilson Combat Product you buy, and it should be a major factor in your decision to purchase. Since 1977, Wilson Combat® has been standing behind our products and services unequivocally. If your Wilson Combat® magazine doesn't perform as it's designed to, return it to us and we'll fix it or replace it - with no expense to you just like we have been doing since 1977. We've worked hard to build the finest track record for customer satisfaction and service of any firearms company in the world. We're proud of our satisfy-every-customer history, and we will continue to do whatever it takes to be sure that your purchase from us works as it should work, and works that way from now on. The ETM is so good, you'll probably never find a reason to test our satisfaction policy, but rest assured, if you do, we will be here as we have been since 1977 to take care of you. Buy an ETM today, and depend on it for a lifetime of service. Try the new ETM - and discover for yourself why 1911 experts around the world won't use anything but Wilson Combat® magazines.
  2. $300 for all 550 rounds. (ammo can NOT included) 500 rounds - .45 ACP Blazer Brass 230 GR FMJ 50 Rounds - .45 ACP Remington UMC FMJ PayPal to friend ok. I will not respond to any posts here, PM me. I Will respond to messages in the order they're received. Must have NJ Firearms Purchaser Identification card, 21 or over and matching drivers license, and not presently under any domestic violence restraining order. Curbside Pick up in Bergen County N.J. only.
  3. Ok, so we all know non-NFA are good to go in NJ. Cool and hooray! But what about taking your boom-stick to, let's say PA, NH, Ohio, etc.... for training, range time, or whatnot. Normally long guns and pistols are fine. Does it mean the NJ legal non-NFA firearm suddenly becomes illegal because its SBR and no tax stamp? It's outside NJ so either local or federal laws now apply.
  4. Seriously, SHTF? People really still believe this stuff I guess. Its cool and mall ninja-ish and I can understand wanting to have it. Nice to play solider boy. Heck, I have one just for the heck. In a realistic disaster or calamity scenario you want everything concealed (non-mil or uniformed LEO). You'll probably live longer that way. But don't bet that one day you'll be running on streets with drop-leg holster with your AR in a lawless society or SHTF event. If you are in active duty then whatever your department gives you should do. Don't hate me, just keeping it real. ;-)
  5. Will scores be emailed of posted to website? Website has June scores.
  6. Deleted text, need to read before responding. LOL
  7. Hi, I'm on the same boat, automatic renewal option. My last PayPal renewal was charged 7/4. Please fix.
  8. Doesn't your Driver's License need to match your FID? I've seen stores check the back DL for COA and match FID address.
  9. Here is the gas tube cleaner. http://www.brownells.com/.aspx/pid=1544/Product/AR-15-GAS-TUBE-CLEANERS However, this is just for maintenance and not to the solution of your problem. Plenty have provided useful insight.
  10. Prefer not to support piracy. At least with shared copies/expense its not as bad as public free for all download. I ordered the CD so I'm good now. I was hoping to play with it over the weekend but I'll just wait for the CD.
  11. Excellent and smooth transaction. Thanks for the primer!
  12. All good and very satisfied with the transaction.
  • Create New...