Jump to content

John Boy

  • Content Count

  • Joined

  • Last visited

  • Days Won

  • Feedback


Everything posted by John Boy

  1. https://www.ammoland.com/2020/02/doj-study-shows-that-a-gun-show-loophole-doesnt-exist/#axzz6F5HT87w7 Send a copy to Loretta Weinberg and snaggle tooth Murphy to get their facts straight and get off the backs of legal gun owners
  2. https://www.atf.gov/resource-center/firearms-trace-data-2017
  3. Search up the Powley Calculator and determine which bullet will provide the highest stability factor
  4. Etsy has once fired 300 Win Mag brass for $30 per 50. Other vendors are in the $43 per 50 https://www.etsy.com/listing/593207873/300-win-mag-once-fired-military-brass
  5. I enjoy shooting long range to 1000yds. Thus far, it all has been done with single shot BPCR rifles at paper and gong targets. Was at a Ridgway RC meeting in PA and won a Mossberg 300 Win Mag. Ridgway has a 700-800-900-1000 yd Silhouette range and instead of spending the big bucks for a turn bolt smokeless rifle - the Mossberg will be it. I mounted a Hi-Lux M-1000 scope on the rifle, fiddled with a bore sighter getting equal elevation and windage adjustments and then started making reloads with 150gr - 168gr - 170gr - 180gr and 220gr bullets. Am finished with the ammo and trajectory tables for each batch of rounds, now the rifle & loads need to be dialed in at Central Jersey for 273yd (equal to 250 meters) scope settings. Once I get this done for each of the rounds by bullet weight, I can set the auto dial up Camputer settings. Next work step when the weather breaks - drive up to Ridgway, spend a week there and fine tune the Camputer auto settings at 250 - 300 - 400 - 500 meters ... then compute and test the difference in Camputer settings from meters to yards at 700-800-900 and 1000yds ... plus determine which bullet weight reloads are going to provide the better groups. And for the good of the order ... Winchester 300 Win Mag brass SUCKS! Out of 100 cases - the extrusions on the necks for 55 cases were split and the brass looked like spaghetti. Contacted Winchester Olin customer service after calling every day for a week - to send the brass back for replacements. This whole process has been a month and a half and still haven't received the compensation check. But I found a vendor on eBay selling once fired so I ordered 250 cases. They are Federals and the brass is excellent but work was needed on them because the original ammo was probably military sniper rounds and the webs were too large and wouldn't chamber in the Mossberg. So the cases were FL sized - web trimmed - case length trimmed - cleaned in the rotary tumbler and ID of necks chamfered before any reloading started. Work was worth the effort because the brass is now up to snuff for future use with excellent cases
  6. Hey Sweeney, turn in your CC permit, you two faced hypocrite January 26, 2018. At today’s “gun safety” announcement, Governor Murphy, Senate President Stephen Sweeney, and Attorney General Gurbir Grewal launched a full scale attack on the right of law-abiding citizens to defend themselves with a firearm outside the home, otherwise known as right to carry. Murphy announced an intention to reverse Governor Christie’s executive order allowing those facing serious threats to qualify for a handgun carry permit, and to challenge any federal action on right to carry reciprocity. ANJRPC Executive Director Scott Bach slammed the move. “The U.S. Supreme Court has repeatedly held that police have no duty to protect individual citizens, which means you’re on your own in an emergency. It is an outrage that the same government that abandons its duty to keep us safe is also working to prevent us from protecting ourselves. Governor Murphy will have the blood of more innocents like Carol Bowne on his hands.” Bach continued, “New Jersey is going to have to be dragged, kicking and screaming, into legal recognition of the right to defend yourself outside the home. ANJRPC is more than happy to oblige and will be at the forefront of the movement to restore this fundamental right.” Please forward this email to every gun owner you know, and if you don’t already receive alerts from ANJRPC please subscribe to our free email alerts for the latest Second Amendment breaking news and action alerts. About ANJRPC: The Association of New Jersey Rifle & Pistol Clubs is the official New Jersey affiliate of the NRA, and is New Jersey’s oldest, largest, and most effective Second Amendment advocacy organization.
  7. And if they don't, any semi auto rifle or shotgun with a forearm (hand guard) will be illegal in the definition of 'assault firearm'... as a Remington 1100 or a Remington 7400, etc, even the Contender Thompson Sub Machine Gun https://images.search.yahoo.com/yhs/search;_ylt=A0LEVvuD22BaNk0A3jInnIlQ;_ylu=X3oDMTByMjB0aG5zBGNvbG8DYmYxBHBvcwMxBHZ0aWQDBHNlYwNzYw--?p=Contender+Thompson+Sub+Machine+Gun&fr=yhs-mozilla-002&hspart=mozilla&hsimp=yhs-002
  8. http://www.njleg.state.nj.us/2018/Bills/S1000/548_I1.HTM?mc_cid=60d4ed50bd&mc_eid=5ed67bce55 included now as an assault firearm ... (iii) a second handgrip or a protruding grip that can be held by the non-trigger hand; Means that any rifle or shotgun that has a forearm would be classified as an assault firearm Senator Gill's Office telephone number ... (973) 509-0388
  9. Old School - the matches are held at the Ridgway RIfle Club, Ridgway, PA ... http://www.ridgwayrifleclub.com/
  10. Marty - then there's the opposite side of shooting ... I cast - reload & hand load for every caliber of firearm that I own including 22LR with black powder. Includes 22LR up to 50-70 and metrics. The last and about the only time I bought factory ammunition was 2 boxes of 303 British from Privi Partizan to pull the jacket bullets to reload them with lead cast bullets for a 1893 Styer Martini Mark III rifle with smokeless and black powders. Being retired, I find enjoyment doing this instead of buying factory ammo, the majority of which is not obtainable for retail sale because the Pb bullet caliber rounds are non existent
  11. Kaiser - would this kind of match interest you ... http://www.ridgwayrifleclub.com/VBR/VBR 2017 Schedule.pdf
  12. Re-scheduled again ... http://www.nj2as.org/supreme_court_reschedules_concealed_carry_case_for_a_third_time?recruiter_id=10251 https://www.supremecourt.gov/Search.aspx?FileName=/docketfiles/16-894.htm
  13. ... after every time they are shot, smokeless and black powder. Then wiped down with Eezox and back in the safes
  14. http://www.nj2as.org/supreme_court_reschedules_concealed_carry_case_again?utm_campaign=peruta5&utm_medium=email&utm_source=nj2as
  15. Jim - Thanks for the link - new vest ordered Passed the link onto all the fellas that I shoot trap with also
  16. Ruger Vaqueros, 45LC - let the picture speak for themselves. These are 2000 limited editions with 4 5/8" barrels. Probably close to 15,000 black powder reloads down the bores for SASS matches, no broken parts and still smooth as silk. The after market Gunfighter grips are now checkered ...
  17. I used to hang my 600yd targets standing on a pallet in this ... Times have change and the range is in great shape - take a look ... http://www.cumberlandmatches.com/rangephotos.html
  18. Based on the responses, not many real casters ... Needs: Accurate Mold Multi Cavity H&G 68 clone .. http://www.accuratemolds.com/bullet_detail.php?bullet=45-200H-D.png - pay attention from Accurate how to break in an aluminum mold How to Cast Your Own Bullets... http://www.zjstech.net/gunstuff/casting.html * Thermometer ... http://www.teltru.com/p-272-big-green-egg-primo-komodo-grill-dome-or-other-kamado-style-replacement-thermometer-lt225r-5-inch-stem-2001000-degrees-f.aspx * Lead, best alloy is Lyman #2 - Bhn 15.4 (Source- RotoMetals) * Wood chips fluxes the melt cheaply * A steel soup spoon to skim the dross from the melt. Drill holes on one side of of the spoon so the melt goes back into the pot * Paraffin lubes the mold pins and leaves no residue * Two tin cans: one to put the dross in and another to put the cut sprues in. Do not put the cut sprues back into the pot while casting The key to nice bullets is: Heat the mold (after break in for aluminum's) and the melt in the pot to a temperature so after a 5 second pour, the sprue puddle frosts in 5 seconds ,,, then cut the sprue with the sprue plate The 8-Phase Casting Cycle ... http://www.longrangebpcr.com/8Phases.htm I ladle pour and here are some tools of the 'trade' ...
  19. Ok Old Timers ... remember Miss Gray?
  20. ... you won't hear this circulated in the NJ Legislature or on any US News Medias! Australian Gun Law Update; Here's a thought to warm some of your hearts.... From: Ed Chenel, A police officer in Australia Hi Yanks, I thought you all would like to see the real figures from Down Under. It has now been 12 months since gun owners in Australia were forced by a new law to surrender 640,381 personal firearms to be destroyed by our own government, a program costing Australia taxpayers more than $500 million dollars. The first year results are now in: Australia-wide, homicides are up 6.2 percent, Australia-wide, assaults are up 9.6 percent; Australia-wide, armed robberies are up 44 percent (yes, 44 percent)! In the state of Victoria.....alone, homicides with firearms are now up 300 percent.(Note that while the law-abiding citizens turned them in, the criminals did not and criminals still possess their guns!) While figures over the previous 25 years showed a steady decrease in armed robbery with firearms, this has changed drastically upward in the past 12 months, since the criminals now are guaranteed that their prey is unarmed.There has also been a dramatic increase in break-ins and assaults of the elderly, while the resident is at home. Australian politicians are at a loss to explain how public safety has decreased, after such monumental effort and expense was expended in 'successfully ridding Australian society of guns....'
  21. An honest review of the Ruger SR1911 ... http://ezine.m1911.org/showthread.php?91-Ruger-SR1911-Review Mine is solely used for SASS Wild Bunch matches - normally 5 scenarios and 100 reloads Reloads are 200gr H&G-68 SWC. Crimp them tight and the correct COL to the handgun ... zero handgun complaints or hiccups shooting 3 - 5 clips in rapid succession for each scenario
  22. Manalapan Township A friend's timetable as of 19 June 2016: * First time FIF & 2 P2P's * All paper work and finger prints competed * Processing Officer: Lt Drucker, retired. Works 2-3 days a week 8 Months and a couple weeks ... still waiting after several calls to Lt Drucker August 8th, 2016 ... Still Waiting!
  23. Details on the Seaview (Seaville) south jersey range ... http://www.shorenewstoday.com/upper_township/zoning-board-approves-variances-for-seaville-shooting-range/article_ae1e3cd4-dd31-11e4-bdd5-2fac59ab5dfc.html
  24. FYI ... Joined the Delaware Range - went to the safety class after staying at a motel over night - at the safety meeting, was told the 1000yd range was only used for matches (not available to members on non match days) - Thank You, cancelled my membership and got my money back. Cumberland Riflemen 600yd range is it (am a member)
  • Create New...