Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won

  • Feedback


Everything posted by carl_g

  1. +1 if you are happy with the results no need wasting more powder.
  2. I got a saiga and converted it a long time ago. It’s a great firearm.
  3. I’ve always run 24.5gr of h335 for 55gr fmjbt. I’d ladder up from the min charge on Hornady’s web site and go from there. Good luck!
  4. Trade 3k small pistol primers fiocchi ?
  5. Looking at what Hodgon posts for 115gr and CFE-Pistol it seems like you are a little on the light side. Lead round nose starting loads are 4.9gr and they post some hollow points with starting loads at 5.3 gr. I would use the HP data as a start at minimum load and ladder up from there with a chrono. Good luck and stay safe.
  6. Haha!! I still have all those photoshops I did of that dude somewhere. I need to dig them up lol.
  7. I’ll tow it away free of charge
  8. Gunbroker is selling primers for 399.99 for 1k small pistol primers. I’ll save you the hazmat and cc charges if you need some
  9. Ive got SPP. $300/1000.
  10. I found what I had..Use at your own risk :) This is the data that I captured based on 230 Plated RN, shot out of a S&W M&P 45c. caliber bullet wt. gr bullet type powder charge(gr) COL velocity(ft/sec) 45ACP 230 RN(xtreme) CFE-P 5.2 1.25 587.6 45ACP 230 RN(xtreme) CFE-P 5.6 1.25 613.4 45ACP 230 RN(xtreme) CFE-P 6 1.25 666.8 45ACP 230 RN(xtreme) CFE-P 6.4 1.25 729.4
  11. It’s good meters really nice! Let me look I think I built up loads for 45ACP.
  12. An AK’s front trunnion is riveted directly to the receiver. There is no upper and lower that detach.
  13. I always used the lee disc system with my Lee Classic Turret press for pistol loads and it was very consistent. Maybe not match grade but good enough for range ammo. If you use ball powders, they will meter just fine.
  14. Where are you located? I have to check my stock.
  15. I am helping my kid build a gaming rig for Xmas and we were able to snag a new founders addition this morning of the nVidia GeForce RTX 3060 Ti from BestBuy for 399. They just released today and are supposed to be on par with the last gen 2080 super. I would bet they are mostly sold out by now. We hit up Microcenter in PA and were able to get a Ryzen 7 3700x for 269 on sale and the case he wanted. It has been a pain in the ass to find all the parts at normal or sale prices and required a lot of digging but we were able to get everything we needed between Micro Center, Amazon, new egg, Best Buy, and Walmart LOL!! When it’s completed I’ll post a picture.
  16. They are cheap. Ugly as F if you ask me. The one I tried worked with no issues but it was uninspiring to say the least. I wouldn’t get one.
  17. IMO if you are going with AMD and your focus is on gaming, the 3600X is still the best value/performance for a CPU. It’s a great time to be a PC gamer as there are so many options out there which will work well.
  18. Gosh. This is horrible. I feel for the staff and anyone else who was in the range when this happened.
  19. That's an option too! I have used this website to src parts for builds and find it useful: https://www.logicalincrements.com/ My kids seem to like the build tools at https://pcpartpicker.com/
  20. For the $250 range you are looking at maybe a Radeon RX 5500 XT or possibly a Nvidia GTX 1660 Super. Either one should be able to do VR and 1080p gaming.
  • Create New...