Scorpio64

All said and done..... $63 and change with core trade in. Now the fun part. The bolt on the connector for negative cable is locked up good. I gave it a soaking with WD40. Well see what happens.

Just got off the phone with Costco. They have an Interstate in my size for $83.00, hard to beat. Thanks for the help.

The battery in my wife's car gave up the ghost today. I guess 10 deg was too much for the previously owned in Florida car. So I'm shopping around and boy is there a wide gap in prices for essentially the same size battery. I know there's a bunch of car guys here so help me out please. I don't think I need a $225 battery but the last one I got for my Caddy was a dog. I made a bad decision and don't want to repeat it. The car takes either a size 24, which it currently has, or alternatively a size 35. What brand under $125 would you recommend? Is there any benefit to going up in size to the 35, no extra electronics, the car is a four banger bone stock Camry.

Has anyone here tried out PSA's Enhanced Polished Trigger, if so, what are your thoughts? Has anyone purchased the ALG ACT and PSA's EPT? I'd like to know how they compare. I want to upgrade the trigger on my SPR before the weather warms up. Please be advised, I am NOT going to install a 2 stage, just not going to happen no matter how much advice I get. I'm old, crotchety and more or less set in my ways. What I need is a durable trigger with smooth takeup and a clean break under 5lbs. I'm certain the ACT will do the trick but at nearly half the price I have to at least look into PSA's knockoff. It appears that PSA is using the same materials but I am a little concerned over the nomenclature in their description. Whereas ALG uses a NiB or a Nickel Teflon coating, PSA indicates only Nickel. Maybe PSA meant NiB but who knows, their descriptions are terrible sometimes. I will also be getting a KNS Gen 2 Mod 2 Non-Rotating Trig/Ham Pin kit. Maybe I'm not as crotchety as I thought. Anyway, as always, your input is valued and appreciated.

What you are paying for is skill, not so much labor. That's why it's only $500 off for the tear down. Don't forget he has to haul the stuff away and pay for disposal so he's really only charging $300 for the labor. If this friend is skilled then I'd say the price is pretty fair. If all you want is labor, you could find some non english speaking helpers for about $120/day.

Yes, legal.

Prior to Scalia's passing, there was already much discussion about the future of SCOTUS vis-a-vis the next President. It is expected that during the next President's term at least two Justices will likely retire. Scalia's death only complicates the issue making the upcoming Presidential election all that more important. There is virtually zero chance that BO will seat a replacement, but rest assured, BO will attempt every underhanded trick to do so. Even if BO does seat a liberal, the balance can be shifted by the next POTUS, assuming that a Republican is elected. I believe Cruz will be the nominee and has a good chance at winning the election. Of course there is the Trump wildcard. If he gets the nomination, who knows what may happen. Even worse, what happens if we get a Republican President but loose the conservative majority in Congress. Holy Schmidt, that will be a pig fuk.

http://njgunforums.com/forum/index.php/topic/80282-holy-sht-scalia-has-died/

Pink is definitely my color, I LOVE pink. just not on a rifle grip though

It's doubtful that he will be replaced before the next POTUS election, so there is a bit of a stay on that. His absence does leave one less constitutional juror during the interim though.

I got an Ergo grip with a PSA LPK, it is surprisingly comfortable, and grippy..

Shhhh....just put the star on your arm, keep quiet, don't complain, don't make eye contact or it will only cause trouble. You don't want to be labeled a troublemaker, do you?.

That's a good point too. Matching the texture can be a pita.

Filling holes is doable but I have found that cutting out problem areas and putting new drywall in works better. Check out this video.

I think there are a lot more gun owners in NJ than 800K, problem is, many of them are not legal gun owners and probably vote democrat, some at least two times.

I would just say "machine parts", it's not prohibited and there is no sense stirring up the low information morons. Because it is used, I will suggest this; Clean it thoroughly and wrap it in an air tight plastic packing material before you box it up. I may have envisioned this in a dream or maybe it's real but I think the USPS has explosives sniffing equipment. If the barrel is not squeaky clean it may set of an alarm. Like I said, can't say for sure but that's what I'd do just to be safe.

Firearms are tools, if you have no practical use for it then sell it. A few years ago I bought a Ruger American Rifle as my first bolt action rifle. It's a fantastic rifle but I have no practical use for it anymore. It is not a good range gun due to the sporter profile of the barrel, but it will make whomever I sell it to a great hunting rifle. I'm not in any hurry to sell the RAR because I'm still saving up for a Ruger Precision Rifle. I'll probably pay for the RPR in full then sell the RAR with the scope and use that money to buy an optic for the RPR. With that said, I cannot tell you how many stories I've read/heard about people regretting selling guns. Who knows, maybe when I retire and move out of state I'll regret letting the RAR go.

It was explained to me, by a person far wiser (and wealthier) than I, that gold and silver is NOT an investment. It is insurance.

Try a local auto dealership. They may actually sponsor you. Their lots are full of trade in beaters headed for the crusher..

Can't really give you any advice on HG ammo but with rifle ammo you would be doing yourself a favor trying out different brands and bullet weights to see what shoots best in your rifle. You would be surprised to see that brand "A" 5.56 55gr may shoot very differently than brand "B: 5.56 55gr, or that your rifle may love 62gr ammo and hate all but one brand of 55gr 556. Finding the best ammo for your rifle takes a bit of money and time experimenting.

Looking good so far. Have you selected a bbl and bcg yet?

Vlad, I can tell we are not going to see eye to eye on this subject. You may very well have some legit reasons for using brakes/comps, and I have recognized the benefits of their use under certain circumstances. You did however reminded me of one of the reasons I forgot long ago why I did not want to go with a linear comp, they are a PITA to clean. Unlike some who shoot thousands of rounds between cleanings, I service my firearms after every range session. If I ever find myself anticipating participation in a live action Call of Duty scenario where I need .2 second splits, you will be the first person I contact to help me pick out the best brake/comp for my rig. The real world reality I have observed at the range is that 99% of shooters are not going for "splits" and they usually take 5 to 15 seconds between shots. That is, unless they are mindlessly wasting ammo on mag dumps for a good ol yee haw.. Seriously, next time you go to the range, look to your left, look to your right and then come back and tell me that those casual paced shooters bursting the eardrums of everyone within 20 feet on either side are benefiting from a brake/comp.

I dunno if this helps at all but I'll tell you what I used on my two MSRs and the reasoning behind it. My first build was a SPR type. I wanted long range energy and accuracy. I went with an 11 deg target crown and a thread protector that recesses (protects) the crown by about 1/4" on the match grade stainless bbl. Even a small nick on the crown can ruin a rifles accuracy. The blow-by gasses can have a very bad effect on the bullets exit if it is not perfectly even. Also, at 18" most of the powder is burned anyway so flash was not really a big deal. A TP is simple, and by engineering standards, the simpler the better. Last transient points: The SPR barrel is quite heavy and the muzzle does not rise up much at all, even with three round bursts, the max that my range allows. As far as I know, there are no brakes/comps that have a target crown. The trade off between muzzle rise control and projectile exit performance was a no brainer for me My second MSR is a M4gery. Originally I wanted a 14.5"bbl and intended to put a Kaw linear comp on it. Not so much for control of muzzle rise but to control the fireball by directing the blast downrange. I shopped for months looking for a bbl that matched the specs I wanted but they were very popular and usually sold out before I could snag one. After months of frustration, a very good deal on a 16" M4 bbl popped up. The reported accuracy and performance guarantee by the mfg made the deal very attractive, but still I balked, so I did some research and think'n. At 16" I no longer needed a muzzle device to bring the oal of the bbl to legal spec. I did not see any benefit to adding another 2 1/8" to the rifle which would have brought the oal of the bbl to the same length as my SPR. It would have defeated the purpose of having a smaller more maneuverable rifle. On top of that, a longer barrel burns more powder inside the bore so that gives a bullet a bit more umph. It was a trade off, but not really a trade off. The oal of a 14.5" bbl with a muzzle device is the same as a 16" bbl with a TP. The 16" bbl gives me more fps and less flash/blast vs a 14.5" bbl. The 14.5" M4 may have looked (tacti)cooler, but that's about it. These configurations are what I decided would work best for me. I can't say if the same will be true for you based on how you will use your rifle, but it at least gives you some food for thought. There will be benefits, and drawbacks, to just about any configuration. For me, energy, accuracy and protecting my hearing, and the hearing of my range friends outweighed having a loud muzzle device to control muzzle rise on a caliber that a 12 year old girl scout could manage.

^^^ This Additionally, I have heard friends talk about bad crimps on reman rifle ammo where the bullet slips into the case. Not good at all.

Vlad, most SA rifles sold across America come with a flash hider, usually the A2, as standard equipment. Naturally the sales of FHs will be well below that of comps and brakes. Why would someone buy something that already came with their rifle? That's like saying aluminum mag wheels are fantastically popular because they outsell the OEM steel wheels on cars. It makes no sense. Additionally, I will say that shooting fast off hand is prohibited at most ranges except for competitions. Like I said, for certain competition rifles, a specialized comp or brake tuned to the shooters style makes perfectly good sense.