CyclingCraig

I have the M&P9 (V1). I changed the sights out for the TruGlo TFX's and Did the full apex trigger Duty/Carry AEK. With those updates, I like the pistol very much. As others have said, the biggest downfall in my opinion of the M&P is the stock trigger, But the "M2.0" said they improved it? You would have to go hold it and try it out for yourself to see if you would still want to replace it. Also the new model has much improved stippling on the grip, which would also help the shootablitly. 1. Is the porting cool? Yes, does it help with muzzle flip, Yes... Necessary... ehhhh. I might get flamed for saying this, but I actually like cleaning my guns and I like them clean. Cleaning those ports would drive me crazy. 2.I have heard people usually change out the trigger on the Pro's to the APEX anyway (Only the performance center models comes from factory with apex) 3. I actually want a 5" and was looking at the PRO (Only way you can get the 5"), but now with the 2.0 you can get it. I think for range and better shootability and HD... 5" 4. Unless you plan on putting an optic on it ($$$$) then I don't think it's worth it. Again, looks very cool with an optic, but not practical IMO.

SHHHHHH... don't tell everyone... I want to make sure I get my 10 boxes first ... THEN I'll spread the word

I still am not sure what I want to do. I keep going back and forth in my head, if I should take the reloading plunge or not. Like I said, I will be reloading 9mm, so from what I understand there isn't much savings there (Guess it depends what you consider "worth it") Some quick math, I figure you can reload 50 rounds of 9mm (Re-use my own brass) for about 8.75 - 9.00 (Per box)... is that correct? Berry's bullets and tightgroup as a cost basis 9mm right now I'm ballparking about $11.50 shipped to my house for blazzer Brass (When I find good sales).. so it's a $2.50 - $2.75 saving per 50 rounds. I shoot about between 150 and 300 rounds of 9mm month.. So in the end I *Save* between 8 and 16 bucks a month... so I guess its a decent amount?

Hi all Thinking about starting to reload and looking for a sanity check At first I will only be doing 9mm pistol cartridges. I have been reading on here a bunch about what to get to start out and I think I have decided on the Hornady Classic Kit. Although sometimes I hear “Don’t buy a kit, get the parts individually with the help and advice here”. So here is what I’m thinking, please correct me if I’m wrong. (Granted these are all without the dies and dial caliper) I can get the classic kit (NOT Deluxe) for about $270.00 If I add up the cost of the same Press, Bushings (3), Powder Measure and scale I’m already at $255.00. And that cost doesn’t include the Handbook, case lube, handheld Primer tool, and handheld Chamfer/Deburring tool, plus some other small do-dads. Would I be able to get a better setup for that same $270.00 if I did something else? My re-loading plan would be to de-cap/de-prime first with a dedicated die then a trip in the sonic cleaner for the brass. Once dry, then re-prime and do normal reloading. Thanks -Craig

Some Questions. I have never been to Easton Fish And Game, so I am not familiar with their layout. 1) Will we be at an indoor range or outdoor range? 2) Class starts at noon, what time should we get there to help set up?

Sweet !! All signed up Quick question, do we need to be EFGA members to attend?

I am also going to verify with command central and make sure I can make it Thanks Stu !

If you take too much off the bottom, you run the risk of the bottom of the sight "pulling" across the top of your slide and scraping it up pretty good. I have about .003 inches between the top of my slide the the bottom of the sight (The part that holds the fiber optic piece), not talking about the bottom of the dovetail. I just installed a Dawson front sight and filed the front edge of the dovetail on the same angle. just go SLOW, test fit often!! What is it going on?

As Always.. Great advice from this forum.. Thanks for the info, didn't even cross my mind about the extra barrel I'll most likely pick up the 28" 12ga synthetic stock version.

I must have missed this post back in July I'm interested, and will be following. I can do the 4th, but don't want to be the only one there, so I'm flexible with dates

Hi all I'm looking at getting my first shotgun. I'm looking at the Remington 870 express because of price and a rebate running right now. I'm looking for something I can keep in the home (Because I really think you need one in the house) and once or twice a year we head out to LHSC to shoot clays. I can't afford multiple shotguns right now, so one will have to do. (Can't have one for clays and one for home defense). SO the 870 express comes in a 26 and 28 inch barrel length. I was leaning toward the 26, just for HD reasons, but does it really matter that much 26 vs. 28. Should I just go with the 28 and call it done or is the 26 worth considering for my needs. Thanks -Craig

Just came back from South Plainfield store. Picked up 2 boxes of the .22 and some 9mm. Guy just took a big case of .22 out of the back to restock shelves so they have a bunch for sure, and plenty of 9mm as well as far as I can tell.

I ended up with a Liberty Revolution 18 and I'm very happy with it's quality. It may be a little overpriced, but I am very happy with it. Still as others said is a RSC, not a SAFE! But for me, it fits my current needs The new models are the Centurion and they have a 24 gun model that is currently on sale for 699 (http://www.libertysafe.com/safe-centurion-safes-ps-23.html?tab=colors) Also comes with a door organizer right now. There is a NJ dealer in south Jersey, where I got mine from and was very happy with their service. Good Luck

Thanks again all... everyone here is so willing to help each other out. Really good advice by all. Haven't been back since, but I might try to get back to the range over the weekend, if not then during the week. -Craig

Thanks guys! Yeah, at least I was at the range. And a bad day at the range is still better than any good day at work! It's always feels good to shoot, and like @oldglockguy said, it is really important to stay positive and concentrate on the success not the failure I'll shoot better next time.

Just venting.... Went to the range last night for some pistol practice.. Shooting from 10 yards, grouping was not tight and kinda random... basically sucked... Wasn't too crazy off center., but bad grouping maybe like 5 inches?? Uhhh.. Slow down, breath control, trigger control, check grip.... got better toward end of session, but still frustrating. Just want to go back today and work on it more but time and family doesn't allow for daily trips to the range Thanks for listening..... (end venting)

I was surprised it took so long for someone to mention CCI Blazer. I usually get mine from here: https://www.natchezss.com/blazer-brass-handgun-ammunition-9mm-luger-115-gr-fmj-1145-fps-50-box.html IF you want to go a little cheaper you can go aluminum case... I have used these a bunch and haven't had an issue, but you should test with your firearm to ensure it feeds properly: https://www.natchezss.com/cci-blazer-handgun-ammunition-9mm-115gr-fmj-1145-fps-1000-ct.html [EDIT] Actually the bulk price is actually pretty bad!... they usually go on sale from that site for a decent price...

Yeah, I was lucky enough to have a few friends who are members. I feel pretty lucky since it's so close and easy. Any other option for me is over an hour drive. I hope to meet some good people there. Hey John. I'll look for you, for sure I'll be easy to spot, I'll be the guy standing up at some point and say "Hi, my name is Craig"

RATS! I have my first club monthly meeting tonight at the range. probationary member !

Why not try local? Your home range is GFH, I am sure they have classes to meet your needs, and since you shoot there and if you have questions, you just may see your instructor there and you can ask a question. In addition you can build progressively through the courses pretty easily when taken locally. I personally took the pistol 2 at RTSP which is the first step to let you take their other more advanced classes. I will be working on the skills demonstrated there and when feasible take the follow-up courses as I build my skills

Sorry for the RSO's, RTSP and anyone that was there. Not something that is easy to deal with. Hope the best for you all I really don't think any RSO, RTSP employee, etc could really do anything to prevent someone from doing this. It happens all too fast when someone is determined to take ones life in this manner. Best of luck to all at RTSP, I will be there for a training class a week from Sunday and trust all the instructors and RSO's there! -Craig

Hi All Looking for some advice on the RTSP Pistol 2 Course (Fundamental Shooting Skills). I have taken the Full NRA Basic Pistol Course already (The 8 Hour course, not the short first steps course). I am looking to improve my accuracy and technique while reinforcing good safety habits. Further down the road, I am planning to take additional instruction with the Defensive Pistol course and the CCW course. I was wondering if anyone here has taken the Pistol 2 course at RTSP and would lend some insight to the course. Would this be a good course to address my goals? Should I look at a different course or just look right to the defensive pistol course (Pistol 3 I think they call it also). Thanks and any advice is welcome. -Craig

I had the same question some time ago when I had an apex trigger and DCAEK installed. I tested it the same way you did both before the install and after. Both ways it performed like your new 9 Pro. I was able to push the striker forward without depressing the striker block, but if I pulled the striker back first to "set" it. The striker block behaved as it should. I found a post by S&W, that said this is the correct way to test the operation of the striker block. That you must pull the striker back first. I'll try and find the post

WOW, I'm going to follow this thread. I am in the SAME exact boat as you. New to shooting, took the NRA Basic Pistol Course and have the same focus issues with the sights on my handgun!! As it turns out, I am(eyes) "relatively OK" at the distance of my front sight, but closeer or down range.. not so much. I ended up shooting WITHOUT my glasses and did much better than when wearing them. Also my thought was in a defensive situation, I'm going going to be like "Hey wait, let me find my glasses". (I don't wear them all the time) Would be great to hear what a shooting eye doctor would say about it. Thanks for posting this question -Craig

If possible, take the course BEFORE you make your purchase. I am a new shooter as well, and took the NRA Basic Pistol course before I purchased. Gives you the opportunity to feel comfortable with pistols and you may get to shoot a few different ones during the class. Just for reference, I purchased the M&P22 and the M&P9. I would have liked to get the Ruger 22/45 or MarkIII for the .22 plinker, but my logic for the M&P22 was I wanted to practice with a firearm that was as close as possible to my "real" firearm. The M&P22 is the SAME exact lower polymer grip as my 9, so they both feel almost identical in my hand.