Jump to content

Slab Sides

Members
  • Content Count

    131
  • Joined

  • Last visited

  • Feedback

    0%

Community Reputation

19 Good

About Slab Sides

  • Rank
    NJGF Member

Profile Information

  • Home Range
    GSSC

Recent Profile Visitors

317 profile views
  1. I'd be making sure whoever does the chrome plating has done firearms before. I've seen some nasty chrome jobs where they get carried away with the buffer and all your edges and detail are gone.
  2. I was going to buy a oil/electric house over the summer. Called NJNG about converting to gas. Free service line and appliance install if I bought appliances from them.
  3. My last house was a 2 story 1910, my brother lives in NH in an early 1800's house (post & beam on granite foundation). For me, I put another layer of insulation in my attic (on the attic floor) and built a cover out of rigid insulation for the attic stairs. Basically a box that covered the pull down stairs opening. I had forced hot air and got a 30-40% increase in airflow just by sealing all the ducts in the basement. Also closed off some of the 2nd floor heat registers and ran the ceiling fan in the bedroom 365. My brother gets most of his heat from a wood burning stove, but as others said, you need to control the heat with fans. He put up a cheap set of french doors to close off the stairwell and uses those little triangular corner fans in various doorways to direct the heat.
  4. Might be a little late but..... If you plan it out, you can drill one hole in the stock toward the front, then drill holes at each adjustment notch in the buffer tube. Then just use a punch to remove the pin if you want to move the stock, then reinsert the pin.
  5. I have both a 1911 and P220, the difference is more the trigger and how the gun feels in your hand, not really which one is "softer" or not. I've put a ton of time into my Sig's trigger an it will never come close to the 1911.
  6. I was one of the first to have Fios in my old house, used Verizon from 2005/6 until this year paid ~$250/mo (wife likes her shows). Moved into a new house, no deals and had to pay installation (2 weeks after calling) even though there was already Fios equipment installed. Going to wait out the contract then "cut the cable". Customer service has gone downhill.
  7. You need a paper trail for pistols.
  8. I did the capacitor/resistor rig, worked on one car not another. $3 at radio shack and some time soldering, etc. The wires are stainless so I made small crips by removing the plastic shields and ends off plain eyelets.
  9. Id light mine up when the neighbors put out their clothes line.
  10. I know I saw ET in the theater so that may have been the first one. But I clearly recall seeing Scarface and I was like 7.
  11. What?? Can you elaborate on what Sigs have that cheaper brands have? There's a sh** ton more than a decocker.
×
×
  • Create New...

Important Information