Search the Community
Showing results for tags 'problem'.
Found 3 results
I reload 223 with CCI #41 mil primers. Seem to have trouble getting depth especially with Lake and Federal brass. Lucky if they are -.001 or -.002. Sometimes +.001 or +.002. Primer pockets are thoroughly prepped with three tools. I use both a hand tool and my press inserter gadget. There is no mil crimp problem here. So what depth should I expect and how do I achieve that? I have no such problem with 9mm or 308 WIN. Thanks for the help.
So guys, I bought a 91/30 recently, and the trigger is pretty wiggly. It still has a clean break at the end that requires a decent amount of pull to set off, so I'm not worried about it going off by accident, but that wiggle before the end just bugs the crap out of me. I've looked around a bit and see that it might be the sear spring that needs replacing. Anybody know a good place for spare Mosin parts?
After firing about 20 rounds or so, the cylinder begins to lock up between every 5 or 12 rounds fired. Regardless if shooting single or double action. Sometimes it can be freed by gently rocking the cylinder back and forth - other times I have to open and reclose it. This morning at the range it was especially troublesome. Any ideas or fixes I can perform ?