Coltnut 15 Posted November 25, 2020 The jack is a Walker/Lincoln J134 also known as #93657. Hein Warner bought the rights and now manufactures the same jack (but overseas), this Jack was made in USA. The Hein Warner currently sells for $1466. That is not retail, that is internet pricing. It is rated at 4 tons and is built to commercial standards. Lift: 26 1/2 inches Reach: 49" Weight: 222 lbs Roller bearing castors multiposition handle zerks on every moving part Hydraulics were rebuilt by the factory and work fine, no leaks. The ultimate jack and a must have if you have tall vehicles. https://www.zoro.com/hein-werner-4-tons-hydraulic-service-jack-26-12-max-lifting-h-hw93657/i/G2715912/ The Jackstands are OTC 1780 Stinger Series Super Heavy Duty 22 Ton Jack Stands That's not a typo. They are rated for 22 tons EACH. Each pair weighs 80 lbs!! They have a max height of 20 in. and are VERY solid at that height. The stands are fully welded 3/8" plate steel with 1" solid steel locking rods. I bought theses because I needed the height, and I wasn't risking my life to cheap stands. These things are SOLID. If you are working on pickups or lifted or heavy vehicles you need these stands. https://www.amazon.com/OTC-1780-Automotive-Accessories/dp/B007KIMALC/ref=sr_1_2?dchild=1&keywords=otc+22+ton&qid=1606081388&sr=8-2 These were only used in my personal garage, I'm a hobbiest, not a mechanic. I just appreciate the importance of good, safe tools, I'm just getting too old to do this kind of stuff anymore. Asking $800 for the Jack and the 4 stands. Share this post Link to post Share on other sites