Jump to content
StanMan01

WTS - AR-15 with Geissele SSA-E Trigger (SOLD)

Recommended Posts

Looking to sell an AR-15 with the following specs:

Upper:

Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)

Comp: VG6 Comp Pin and Welded by Tier 1

Rail: PSA Lightweight 15" MLOK Rail

BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group  purchased on October 9th 2020

Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)

Lower:

Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020. 

LPK: PSA Lower Parts Kit

Stock: RRA A2 Buttstock Kit, Black

Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger

Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included

Magazines:

2 - 10rd PMags Included

Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost

Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)

Rounds Count:
Upper has about 250 rounds down the pipe

Lower: Maybe 50 Rounds

Price: $SOLD

Location: Essex or Monmouth County FFL

Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws 

First "I'll take it" gets it

Can provide additional photos upon request.

image0.thumb.jpg.c137af5606c01fb15e406af4e7130c1a.jpgIMG_6604.thumb.JPG.7c9321602f76b0d72220fc028db36258.JPG

Edited by StanMan01
SOLD
  • Like 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By Dooly
      Item has been sold.  Please close thread.
       
       
       
       
       
       
    • By Lone Shark
      Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.

      Included with Rifle:
      3 - Daniel Defense 10 rd. Mags.
      Daniel Defense Muzzle Climb Mitigator, Gen II.
      Magpul front and rear flip sights
      BipodDeflector Brake Kit
      Tipton Max Force carbon fiber cleaning rod.
      Daniel Defense full-latch impact plastic case
      380 rounds ammo.
      Monmouth County Area - $2,960.

      All Brand New - Never Fired - New Jersey Compliant
       
      The first to post "I'll take it" wins the sale.





    • By morton chirnomas
      SOLD
      OK TO DELETE
      Selling a brand new,  never been fired,  Tavor X95. Purchased in the last 3 or 4 months.
      ALL NJ requirements are your responsibility.  Payment will be expected up front.  Pics to follow.  Willing to meet at your FFL if they are in Northern or Central NJ. Will ship to another FFL at your expense. 
      $2100.00
      First I'll take it, gets it. Please understand the terms above before making the commitment. 



    • By Swizz70
      Hello Gents,

      I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical.  Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.

      Here are some specs:

      300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
      GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
      Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
      {Nitride} M4 Extended Feed Ramps
      Nitride M4 Barrel Extension
      1:7 Twist Rate
      5/8×24 Thread Pitch
      Raptor Charging Handle

      Price: $695

      Pm or email me with any questions: [email protected]
      I am in Deptford NJ.
      THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
      A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)"  on this thread.

























    • By Zigzag22
      Hello, I am looking for somewhere to get my muzzle brake pinned on a budget. I am okay with shops in Southern NJ and PA.
      If anyone has any advice it would be greatly appreciated!
      Thank you!
  • Posts

    • See doctor and attorney first.  Submit application that will be deny waste of time.   
    • Love this guy!  https://nypost.com/2022/07/01/a-93-year-old-man-shoots-los-angeles-home-intruder-police/?dicbo=v2-6c03b65b29bff46c4e7697ddb95ec567
    • I like the dot as low as possible in the slide with the lowest irons possible. If you’re buying a complete milled slide I think Gray Ghost Precision is having a pretty good sale on their slides right now as well. JW makes nice slides, but their prices  are generally an little higher. I’m still a big Brownell’s fan. Can’t beat it for the money. If you already have the slide and are sending it to be milled, I recommend: DP Customs: https://www.dpcustomworksllc.com and  Maple Leaf Firearms: https://www.mapleleaffirearms.com I have Glock 19s done by both of them and the work is outstanding, priced well, and quick turnaround with good comms.
    • Thanks for the reply back. I’d like to move forward with a RD for at least one handgun and see if it helps with my old eyes for better consistency. I was leaning towards battlewerx because it looked like they were a one stop shopping experience but they are out of stock on the cowitness sights. Jagerwerks looks like they may come in cheaper and had good reviews so kind of at an impasse for the moment do to the sights. Since you mentioned in an earlier posing would you go with the lower 1/4  cowitness or the 1/3? Of course I re-opened an older thread and added a twist so would you still get the lowest  sights even with the rear sight dovetail in front of the RD? Either way I think green dot would do the trick for me, I have the SIG SAUER ROMEO5 Green dot on a long gun and its a huge difference from the standard red dot. Hope to decide before the Fourth because both have holiday pricing in effect. Thank you in advance and have a great holiday. 
    • Come Together (metal cover by Leo, Hannah, Rabea, Erik & Truls) - YouTube
×
×
  • Create New...