Bully 749 Posted December 17, 2020 I'm planning a precision rifle, kinda Gucci, but gonna get used. It will be shot prone/benched and will not be a "battle rifle". I wanna shoot itty-bitty groups from as far as I can. I'm lost, on of all things, the grip. Not sure where I should go with it. Should I do a grip with a palm shelf? Should I do a Penguin grip as it mimics what I like in my precision bolt guns? Go with a normal kinda Magpul? So I'm asking the hive for suggestions. 18" barrel 223 with a Magpul PRS and some better glass is the basic configuration. I will be running it off of a bi-pod. Thanks. Quote Share this post Link to post Share on other sites
Scorpio64 5,119 Posted December 17, 2020 When I was putting my SPR together on paper, I felt like everything I had read was steering me towards an expensive adjustable palm shelf type grip. It's what the "experts" use, after all. Well, I'm not an expert and wasn't about to drop a lot of money on a funny looking grip. So, I split the difference. The grip I eventually bought was a stippled finger contoured type with a slight thumb shelf, and a tiny bit over sized, but not by much. It wasn't exactly a scientific method, but the grip I chose has pro like features without the price tag , it just looked like it was a good fit. Luckily for me, instinct paid off. I believe the grip is made by Ergo. Consider the type of grip you are already used to may, or may not translate well to a substantially different platform. The only thing I can suggest is to look at reasonably priced grips, maybe one with a ratcheting adjustable angle, experiment, dial it in, and once you have a better idea of what you like, what's comfortable and producing results, then spend some money on a competition grade grip. Quote Share this post Link to post Share on other sites
High Exposure 5,634 Posted December 17, 2020 I think I have a LaRue APEG sitting in the parts bin. I’ll send it to you. It’s a nice melding of a precision type AR grip and something like a Magpul MIAD or BCM Gunfighter. If nothing else, it will get you started. 1 Quote Share this post Link to post Share on other sites
Scorpio64 5,119 Posted December 17, 2020 1 minute ago, High Exposure said: I think I have a LaRue APEG sitting in the parts bin. I’ll send it to you. If you ever have a garage sale, you had BETTER put me on the notify list! Quote Share this post Link to post Share on other sites
Bully 749 Posted December 17, 2020 2 minutes ago, High Exposure said: I think I have a LaRue APEG sitting in the parts bin. I’ll send it to you. It’s a nice melding of a precision type AR grip and something like a Magpul MIAD or BCM Gunfighter. If nothing else, it will get you started. Let me know if you want anything for it. Quote Share this post Link to post Share on other sites
High Exposure 5,634 Posted December 17, 2020 I already owe you one. Let me see if I can find it and I’ll get it in the mail this weekend. It has a nice geometry to it and is well stippled to prevent slipping. Quote Share this post Link to post Share on other sites
Bully 749 Posted December 17, 2020 1 minute ago, High Exposure said: I already owe you one. Let me see if I can find it and I’ll get it in the mail this weekend. It a nice geometry to it and is well stippled to prevent slipping. Thanks bud. We’re square. Quote Share this post Link to post Share on other sites
High Exposure 5,634 Posted December 17, 2020 3 minutes ago, Scorpio64 said: If you ever have a garage sale, you had BETTER put me on the notify list! You and a couple others will have first dibs! Quote Share this post Link to post Share on other sites
JackDaWack 2,894 Posted December 24, 2020 I love the magpul grips for all my rifles, but my DMR has an ergo right handed sure grip over molded It fits my hand fantastically. YMMV. I see no reason for an ambidextrous grip on a precision rifle. Quote Share this post Link to post Share on other sites
RUTGERS95 889 Posted December 24, 2020 On 12/17/2020 at 7:44 AM, Bully said: I'm planning a precision rifle, kinda Gucci, but gonna get used. It will be shot prone/benched and will not be a "battle rifle". I wanna shoot itty-bitty groups from as far as I can. I'm lost, on of all things, the grip. Not sure where I should go with it. Should I do a grip with a palm shelf? Should I do a Penguin grip as it mimics what I like in my precision bolt guns? Go with a normal kinda Magpul? So I'm asking the hive for suggestions. 18" barrel 223 with a Magpul PRS and some better glass is the basic configuration. I will be running it off of a bi-pod. Thanks. are you stuck on 223? Ergo precision grip is nice as is one other that name escapes me but has a thumb lip On 12/17/2020 at 1:40 PM, Bully said: Thanks bud. We’re square. if he can't find it, I have a spare I can send you as it just sits in my box Quote Share this post Link to post Share on other sites
Bully 749 Posted December 24, 2020 1 hour ago, RUTGERS95 said: are you stuck on 223? I’m not stuck on anything. However, I’m building in 223 as it suits my needs well. Inexpensive to load and accurate with minimal recoil out to 600+. It happens to be high on the list of favorite calibers. 1 Quote Share this post Link to post Share on other sites
RUTGERS95 889 Posted December 24, 2020 7 minutes ago, Bully said: I’m not stuck on anything. However, I’m building in 223 as it suits my needs well. Inexpensive to load and accurate with minimal recoil out to 600+. It happens to be high on the list of favorite calibers. I only ask because precision and long range with smaller pills usually leaves one frustrated. You'll hear people say 600yds all day but those days are dry and optimal conditions. Heavier and better BC is where you want to go for longer and precision. I am more in the minority on this board with this view so take it for what it's worth but since you said you said load (assuming you reload), the world is your oyster. I'd look at 6mm ARC or Grendel way before 223 here. Quote Share this post Link to post Share on other sites
Bully 749 Posted December 24, 2020 7 hours ago, RUTGERS95 said: I only ask because precision and long range with smaller pills usually leaves one frustrated. You'll hear people say 600yds all day but those days are dry and optimal conditions. Heavier and better BC is where you want to go for longer and precision. I am more in the minority on this board with this view so take it for what it's worth but since you said you said load (assuming you reload), the world is your oyster. I'd look at 6mm ARC or Grendel way before 223 here. We've had this discussion. I don't expect you to remember. I've shot competitively with a .223 out to 600. It's not a problem. There are a lot of ways to skin a cat, I do it with handloaded ammo and the longest bullets my rifle will shoot well. My match rifles typically never see factory ammo. This one will, only because I want to see if I can get .75 or better with factory ammo (69gn FGMM). After I run that little "test" it's gonna be handloads all day. Quote Share this post Link to post Share on other sites
Krdshrk 3,871 Posted December 24, 2020 I've been liking the FAB Gradus. 2 different angles on it - one for close CQB type shooting, another for long range, and it has a bit of a thumb shelf. 1 Quote Share this post Link to post Share on other sites
Bully 749 Posted December 24, 2020 9 minutes ago, Krdshrk said: I've been liking the FAB Gradus. 2 different angles on it - one for close CQB type shooting, another for long range, and it has a bit of a thumb shelf. That looks pretty neat. Thanks. Quote Share this post Link to post Share on other sites
Scorpio64 5,119 Posted December 24, 2020 2 hours ago, Bully said: I want to see if I can get .75 or better with factory ammo (69gn FGMM). If you can get it, try PPUs .223 OTM. Maybe it's a one-off that my SPR (223W 18" 1:8) and that factory ammo get along really well, but I'm shooting .35 MOA with their 75gr OTM. Quote Share this post Link to post Share on other sites
RUTGERS95 889 Posted December 24, 2020 4 hours ago, Bully said: We've had this discussion. I don't expect you to remember. I've shot competitively with a .223 out to 600. It's not a problem. There are a lot of ways to skin a cat, I do it with handloaded ammo and the longest bullets my rifle will shoot well. My match rifles typically never see factory ammo. This one will, only because I want to see if I can get .75 or better with factory ammo (69gn FGMM). After I run that little "test" it's gonna be handloads all day. thumbs up! Quote Share this post Link to post Share on other sites
Bully 749 Posted December 24, 2020 1 hour ago, Scorpio64 said: If you can get it, try PPUs .223 OTM. Maybe it's a one-off that my SPR (223W 18" 1:8) and that factory ammo get along really well, but I'm shooting .35 MOA with their 75gr OTM. I would try it if I could find it. Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted December 28, 2020 Here are a few I like. ERGO Grip Grip-Suregrip https://www.brownells.com/rifle-parts/grip-parts/pistol-grips/ar-15-suregrip-ergo-grip-prod72627.aspx?cm_mmc=affiliate-_-Itwine-_-IR-_-60594&utm_content=60594&aid=420441&utm_source=ir&utm_campaign=itwine&utm_medium=affiliate&source=ir&clickid=XzPTIMwo8xyLT2y05-R4sULoUkEy0PxZRQUS0s0 Hogue overmold AR15 Grip https://www.opticsplanet.com/hogue-overmold-ar-15-rubber-grip-only-15000.html?sscid=c1k4_ucylf&utm_source=shareasale&utm_medium=affiliate&utm_campaign=affiliate-2287524 DD with built in trigger guard (no good for forged lower) https://www.opticsplanet.com/daniel-defense-pistol-grip-with-oversized-trigger-guard-black-21-071-05177006.html?sscid=c1k4_uczg1&utm_source=shareasale&utm_medium=affiliate&utm_campaign=affiliate-2287524 Wilson Combat BCM with their star burst pattern is very nice too. https://shopwilsoncombat.com/Wilson-Combat_BCM-Starburst-Gunfighter-Grip-Black/productinfo/TR-GRIP-BLK/ Wilson has a hogue version too. https://shopwilsoncombat.com/Hogue-Rubber-Grip-Beavertail-Finger-Grooves-Black/productinfo/NW636/ This is the one I have on my 6mmAR with PRS stock. https://www.del-ton.com/Ergo-Grip-AR-Deluxe-Tactical-with-Palm-Shelf-p/gp1032.htm Quote Share this post Link to post Share on other sites
Bully 749 Posted December 28, 2020 Thanks buddy!!! Quote Share this post Link to post Share on other sites