1911 Suggestions

[Lublin 3]

I called Sarco yesterday and they still quoted me $379.99 for the RIA Standard 1911 and the Tactical for $449.99 so I'll be visiting them this week to check them out.

 

Can't beat that.

 

Hey that's pretty good. I was quoted more at another place, they wanted $430 for the standard.

 

I handled the Rock Island 1911's and they have to be the biggest pieces of garbage ever. Grainy action, I had to work the slide release with 2 hands to get it to go. Even the salesman was telling me the guns are garbage. The alloys they use to cast the safety levers is crap, too. The salesman told me people were returning them, specifically the Tactical model, because the levers were cracking.

 

The money spent on a Rock Island 1911 and all of the mods and gunsmithing it'll take to make it a good gun is close to the full price of a QUALITY 1911. Save your money.

 

YMMV.

[tbtrout 141]

That's a disheartening report Rich, what store were you at?

[Lublin 3]

That's a disheartening report Rich, what store were you at?

Sarco.

[tbtrout 141]

Thanks, I am going to have to find one and check it out. It seems the reports are they work great or they suck. No where in the middle.

Maybe it is a matter of the QC Dept checking them before or after the Mojo lunch.

[totalabuse 27]

If you're on a budget go for the Springfield mil-spec. You can find for $550 easy. If you watch various boards you can find them cheaper.

[Mauser88 0]

I called Sarco yesterday and they still quoted me $379.99 for the RIA Standard 1911 and the Tactical for $449.99 so I'll be visiting them this week to check them out.

 

Can't beat that.

 

Hey that's pretty good. I was quoted more at another place, they wanted $430 for the standard.

 

I handled the Rock Island 1911's and they have to be the biggest pieces of garbage ever. Grainy action, I had to work the slide release with 2 hands to get it to go. Even the salesman was telling me the guns are garbage. The alloys they use to cast the safety levers is crap, too. The salesman told me people were returning them, specifically the Tactical model, because the levers were cracking.

 

The money spent on a Rock Island 1911 and all of the mods and gunsmithing it'll take to make it a good gun is close to the full price of a QUALITY 1911. Save your money.

 

YMMV.

 

Gee. That's what I have been saying all along in this thread yet one member calls me an elitist.

 

Go figure. :roll:

[tbtrout 141]

I wrote that you sound like an elitest the way you write. You make it sound like if you do not like it, it is not good enough, because eveything you have is the best. Try improving your vernacular and grammer and you may not be misunderstood. I am done with this subject about you.

[Mauser88 0]

I wrote that you sound like an elitest the way you write. You make it sound like if you do not like it, it is not good enough, because eveything you have is the best. Try improving your vernacular and grammer and you may not be misunderstood. I am done with this subject about you.

 

Nice spin again. The truth hurts huh?

 

I posted about my experience with said pistol and you call me an elitest. Very sad.

 

I have 35+ years of firearms handling. Practical shooting and reloading.

 

When I offer my opinion here it's from many years of shooting experience not heresay.

 

I've spent my life in this hobby buying and trying out 100's of firearms. I can honestly say in my opinion what works and what doesn't. I offered my opinion on the RIA 1911 based on many hours shooting it while at CJRPC with members who cheaped out and bought one. That makes me an elitest?

 

I've gone through my share of crappy pistols in my lifetime. There was no internet to guide me. I know better now from life's share of experience.

 

My opinion again in case you didn't notice is to avoid them. It's better to save your money and buy a more reputable variation like a SA , Colt or Kimber. Owners of Ed Browns and Wilson Combat are the elitest's. ( Sorry Totalabuse ). Yes he's a Bud of mine so I can say that.

 

If that makes me an elitest in your opinion then so be it. If you misunderstood my post and opinion then I apologize in advance.

[Lublin 3]

I love you guys.

[djg0770 481]

I offered my opinion on the RIA 1911 based on many hours shooting it while at CJRPC with members who cheaped out and bought one. It's better to save your money and buy a more reputable variation like a SA , Colt or Kimber.

 

Mauser,

 

Had you posted JUST the 2 sentences above originally... 8-)

[djg0770 481]

Try improving your vernacular and grammer and you may not be misunderstood.

 

TB - the red squiggly under the word when you type it means it's spelled wrong. It's GRAMMAR.

[Mauser88 0]

I offered my opinion on the RIA 1911 based on many hours shooting it while at CJRPC with members who cheaped out and bought one. It's better to save your money and buy a more reputable variation like a SA , Colt or Kimber.

 

Mauser,

 

Had you posted JUST the 2 sentences above originally... 8-)

 

Your correct Sir. When it comes to my passion, firearms I tend to have diarreha of the mouth. LOL!!

[totalabuse 27]

I bought a Mark23 because I'm an elitist :mrgreen: I bought a Ed Brown because I'm wanted a semi-custom 1911 that would work right out of the box. I had a Kimber and it was full of fail. Remember?

[Lublin 3]

The Rock Islands I handled were full of fail. Maybe there's some good ones out there. My first impression was "NOPE!"

[tbtrout 141]

Yeah, spell check should be my friend because I am not good at typing. :oops: I think we/I went a little over the top and I apologize, sometimes the Irish temper mixes up with the Polish, well you know.

 

Mauser I did not mean to be disrespectful, let's just leave it at we both are opinionated. Your contributions and years of experience are a value to this site.

[totalabuse 27]

Yeah, spell check should be my friend because I am not good at typing. :oops: I think we/I went a little over the top and I apologize, sometimes the Irish temper mixes up with the Polish, well you know.

 

Mauser I did not mean to be disrespectful, let's just leave it at we both are opinionated. Your contributions and years of experience are a value to this site.

 

 

You got an attitude but don't know why?

That's what I tell the wife anyway

[tbtrout 141]

Most of the time I can hit delete before submit, but sometimes it is too late. The good thing about typing is normally I come out and say it, at least here I can type and erase it after I think about it.

[Mauser88 0]

Yeah, spell check should be my friend because I am not good at typing. :oops: I think we/I went a little over the top and I apologize, sometimes the Irish temper mixes up with the Polish, well you know.

 

Mauser I did not mean to be disrespectful, let's just leave it at we both are opinionated. Your contributions and years of experience are a value to this site.

 

No hard feelings on my part. We are all here to learn.

 

I'll help anyone anytime. My door is always open.

[totalabuse 27]

[tbtrout 141]

TA, I really like your sense of humor.

 

Now let's get this thread back on track. I have derailed it enough.

[matt6669 71]

TA, I really like your sense of humor.

 

Now let's get this thread back on track. I have derailed it enough.

 

you tend to do that a lot haha

 

It's either a DW or its not worth buying, yayyyyy flinging the crap around again

[tbtrout 141]

TA, I really like your sense of humor.

 

Now let's get this thread back on track. I have derailed it enough.

 

you tend to do that a lot haha

 

It's either a DW or its not worth buying, yayyyyy flinging the crap around again

 

yeah, yeah, Good choice with a DW

[matt6669 71]

lol the funniest thing is I'm probably the last person you want to ask advice for on a 1911 lol

 

I can't wait to pick one up though. But I gotta pay some tuition first, and pay for my vacation this week, then it'll be time to buy it. I can't wait thats for sure!

[ronoverdrive 0]

Honestly I rather have a SA 1911, but finding one in good shape in the $400 - $500 range is the hard part. Plus I like to tinker so if I can find a decent RIA that will eat/shit brass like no tomorrow with a few mods I can do myself then so be it.

[CPRPE 4]

Wow... So I started this thing a few weeks ago never thinking it was going to get to 8 pages. I am awaiting permits and I saved a good amount of cash since I first got the urge. My next question is...For the higher end models (say $1200 to $2000) is there a long waiting period? Should I start inquiring now about getting one? Permits are from Jackson and I was told it will probably be two weeks. My FID took 8 earlier this year. I was going to request quotes through the forum to give the business locally. Any thoughts?

[totalabuse 27]

. I was going to request quotes through the forum to give the business locally. Any thoughts?

 

 

PK90 is a Ed Brown distributor.