Jump to content
Old School

Were You Surprised

Recommended Posts

Just now, JC_68Westy said:

Are you in panic mode yet? Need more...

I just got back into reloading so as not to touch my stash of factory ammo.  6,700 is the most I ever had so I'm cool to leave it alone. If I did get a chance, I would buy another case of SPPs just to help out others here. I'm down to 600 primers for 5.56 so I would get some of those as well.

Share this post


Link to post
Share on other sites
3 hours ago, JohnnyB said:

I just got back into reloading so as not to touch my stash of factory ammo.  6,700 is the most I ever had so I'm cool to leave it alone. If I did get a chance, I would buy another case of SPPs just to help out others here. I'm down to 600 primers for 5.56 so I would get some of those as well.

U need srp?

 

Trade?

Share this post


Link to post
Share on other sites
27 minutes ago, JohnnyB said:

I have some SRP but I'm afraid of slam fire and I found 700 or so CCI 41s that I forgot I had.  What are your thoughts about SRPs for 5.56 in an AR? 

Ensure proper seating depth.....no issues...in 5.56 and or 30 cal...  ;)

 

I have crap load of srp..i will NEVER use....would trade for lrp spp lpp.

Share this post


Link to post
Share on other sites
50 minutes ago, JohnnyB said:

I have some SRP but I'm afraid of slam fire and I found 700 or so CCI 41s that I forgot I had.  What are your thoughts about SRPs for 5.56 in an AR? 

 

21 minutes ago, CAL. .30 M1 said:

Ensure proper seating depth.....no issues...in 5.56 and or 30 cal...  ;)

 

I have crap load of srp..i will NEVER use....would trade for lrp spp lpp.

@JohnnyB I've exclusively used std CCI srp in 223 for over 45 years. Nothing else. NEVER ANY PROBLEM.

Do what @CAL. .30 M1 says.  I've always hand primed.

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
5 minutes ago, GRIZ said:

 

@JohnnyB I've exclusively used std CCI srp in 223 for over 45 years. Nothing else. NEVER ANY PROBLEM.

Do what @CAL. .30 M1 says.  I've always hand primed.

Thanks @GRIZ I have been hand priming my 5.56 and .223 but you have bigger paws than I do! I was thinking about doing them on my progressive press but still do rifle rounds on my single stage.  I get blisters from hand priming when I do too many at a time but I guess its worth it knowing that every primer is properly seated.:)

  • Like 1

Share this post


Link to post
Share on other sites
2 minutes ago, JohnnyB said:

 

 

I know you have met and shook hands with @GRIZ as I have . I don't think he would ever get blisters with those paws!:lol:

Yeah @JohnnyB but I have short fingers.  The hand and finger muscles were developed long ago in my teens (like 100 years ago) when I was doing Karate and Gung Fu.  Helped me learning how to shoot.

  • Haha 1

Share this post


Link to post
Share on other sites

 

 

12 minutes ago, GRIZ said:

I'm sure the Army vaccinated me for that!!!

I remember in Navy boot camp they gave us a huge needle shot in the butt cheek, called a "B" shot if I remember right. Left a knot in your ass for days but cured everything!:lol:

@Displaced Texan can chime in if my facts are wrong or they stopped giving those shots after 1976 when I got mine!

  • Like 1

Share this post


Link to post
Share on other sites
24 minutes ago, JohnnyB said:

 

 

I remember in Navy boot camp they gave us a huge needle shot in the butt cheek, called a "B" shot if I remember right. Left a knot in your ass for days but cured everything!:lol:

@Displaced Texan can chime in if my facts are wrong or they stopped giving those shots after 1976 when I got mine!

The "B shot" probably vaccinated you against 20 diseases for the rest of your life!!!

  • Haha 1

Share this post


Link to post
Share on other sites
5 hours ago, JohnnyB said:

Thanks @GRIZ I have been hand priming my 5.56 and .223 but you have bigger paws than I do! I was thinking about doing them on my progressive press but still do rifle rounds on my single stage.  I get blisters from hand priming when I do too many at a time but I guess its worth it knowing that every primer is properly seated.:)

I have bulk loaded hundreds upon hundreds upon hundreds of 5.56 on my hornady lnl with NO issues....as long as case prep is good.....you can easily feel the primer seat perfectly....

 

Try it!

  • Thanks 1

Share this post


Link to post
Share on other sites
6 hours ago, JohnnyB said:

 

 

I remember in Navy boot camp they gave us a huge needle shot in the butt cheek, called a "B" shot if I remember right. Left a knot in your ass for days but cured everything!:lol:

@Displaced Texan can chime in if my facts are wrong or they stopped giving those shots after 1976 when I got mine!

I’ll never forget that one. My asscheek was sore for a week!!  

  • Haha 1

Share this post


Link to post
Share on other sites
On 2/15/2021 at 9:47 AM, Scorpio64 said:

Can't say I was surprised, but did not anticipate the severity.

That's true for me as well.  I have a decent stash, but not enough to last forever.  I would have even more, but I've been concerned about how I'm going to transport and store all of it when we downsize our housing. 

Share this post


Link to post
Share on other sites

I use the k&m hand primer for .223, its gets a bit taxing by the 500th case. 

Since I had to remove the crimp at the primer pocket, I like the feel I get with hand priming to know I swaged enough. 

Once the brass goes through a cycle I have no issues priming on the press. But I got a couple cases stuck in the press from primers not seating fully due to the crimp no fully removed.

I like to process my brass, and prime it. Then it all goes into a can ready for powder and bullet when I get around to it. This way I can load small batches, but process the brass in large lots. 

  • Agree 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • In 50 years of living in NJ I've never experienced any attempt to inspect the interior of the home, and only one definite inspection of the exterior for an announced reassessment of all properties and that was a drive by. About 9 years of that was living in an apartment, but still, uncommon. Every place I lived had either a finished attic, basement, or both. But they were also included in the habitable square footage on the taxes when we got there. 
    • 27.00 and change in tolls to drive down the shore from Rutherford,  47.00 in tolls to go out to Long island to visit dying relatives. Now I read they are going to raise the fees in the DMV. Murphy lied just to get elected when he said that seniors will get a significant tax break with his StayNJ" program to stop us from leaving.   Keep voting for democrats...this is what you get.  Tax and spend is all they know.  Never cut anything.  This state sucks.
    • I get the added benefit that since I have a TSP rather than a true 401(k) they tax my retirement too. Yaaaay!
    • PX4 Full Size 9mm Type G. Upgrades include: - Type G Stealth/Low Pro Levers and Slide Release - Truglo Tritium Pro Sights, White Outline Front Sight - Beretta Competition Trigger Group - LTT Optimized Trigger Bar - PX4 D Spring All parts professionally installed by gunsmith. Pistol has 400rds through it. All original parts (trigger group, trigger bar, Type F levers, sights) are included in sale. Original Beretta case and all contents included in sale. 3-10rd mags (these are the original mags that came with it). Pistol is in Excellent condition, there are a couple minor smudges on the lower part of the slide near the frame which I guess is from the sight vise. If I didn't point them out you wouldn't even notice. Trigger is super sweet, especially the SA Reset. Between the gun, parts, and gunsmith labor I have about $1200 into it. $800 Sale is Cash Only.   I'm in Whippany near Morristown. I will travel within a reasonable distance to meet at your preferred FFL to do the transfer. Buyer pays transfer fees.   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------      
×
×
  • Create New...