-
Use Promo Code "NJGF10" for 10% Off Regular Items
-
Supporting Vendors
-
-
Latest Topics
-
-
-
Similar Content
-
By RetNJ47
Selling off some ammo. Message me with any questions.
Tried to price everything lower than what I could find on ammoseek.
SOLD-ATS(TargetSportsUsa brand I think) 5.56 M193
CCI 22 Short $8/box(100)
SOLD - CCI Blazer Brick
Winchester 7.62x51 $15/box (20)
Aguila Minishell Slugs $20/box(20)
Federal Premium 308 SMK $25/box(20)
Federal Berger OTM 6.5 Creedmoor $25
Hornady Precision Hunter 6.5 CM $30/box(20)
277 Fury(Sig Sauer) Accubond Hybrid Ammo $40/box (is/was? new military 6.8)
Tulammo 7.62x39 in 50 cal ammo can 1000 rounds $550
All ammo stored in humidity controlled environment either in ammo cans or larger sealed box with dessicant packets inside.
Once again, I researched prices on ammoseek if I’m off on pricing please message and let me know or message me an offer.
Located in Toms River area would prefer to meet at either Shoreshot or Weshoot.
Thanks for reading!
Also have all this stuff for sale message me if interested.
SOLD: Unity Riser FDE
SOLD: 5.56 Warcomp
SOLD: Black Raptor CH(1 left)
SOLD: Vortex Sparc Red Dot
SOLD: Unity Micro T2 Mount
SOLD: Surefire 7.62 Warcomp
A lot of people asking what is in this last picture. I can take better pictures and post here or a new thread if everyone wants that or an list. And just send a message to request close up pictures for serialized items if you wanna check. I assure you everything is legit but I know I’m new so my feelings wont be hurt.
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By RetNJ47
Decided to sell again.
Very light use shot less than 50 rounds.
Zastava ZPAP M70(Tacticool Version) Serbian AK-47 with UTG QD optics mount with Vortex Sparc AR red dot.
1x PMAG 10/30 round from the factory.
5x Zastava 10/30 round mag blocked magazines.
Single point sling- Unknown manufacturer.
Asking $1250 OBO, Located in Toms River and meetup at FFL for transfer would prefer to be Shoreshot or Weshoot.
Also have 1000+ Tulammo Steel Case 7.62x39 in 50 Cal ammo can I can include for extra $$(no idea on price they are all over the place and crazy). Stored in can with dessicant and cardboard since purchase. Have the original box but it has a slight tear in the corner.
First to post “I’ll take it” gets it.
-
By dysman78
Prior sale fell through. relisting -
I have 500 rounds of LAX Ammunition Reman 165gr RNFP and 500 rounds of LAX Ammunition Reman 180GR RNFP in factory boxes (not loose) for a total of 1000 rounds. Willing to split up and sell in 500 rds if necessary.
$135 for 500 rounds $260 for all 1000 rounds
This ammo has been properly stored and purchased in late 2022. Been using LAX Ammo for years for range ammo and never had any issues.
First person to say i'll take it gets it.
Live in Essex County. Willing to travel reasonable distance if necessary or meet up at local range (Gun for Hire, RTSP etc.)
PM me with any questions
-
By NewYorkCentralRailroad
Well folks, I'm back with another deal. I've seen what's been going on with 5.56 and .223 pricing, and I hate it as much as you do. I went to a gun show yesterday and people were selling Winchester Service Grade 5.56 for $0.65 per round for a 1000-round case. That's ludicrous, and AmmoSeek doesn't give much better prospects, so I'm here to give a few lucky people a deal. As of 10/23/2023, I will have in my possession 1500 rounds of Winchester White Box 5.56 in 150-round Range Packs. I don't need all of them, so I would like to give y'all some of them. The best deal for any 5.56 on AmmoSeek right now with free shipping is $0.51 per round for some Igman stuff.
I'm offering these packs at $73.50 per box, or $0.49 per round. That includes tax! This is the best price that I've found anywhere on the internet for LC 5.56. If you buy more, I might be able to work with you on the price a bit more. Again, I have 8 boxes right now, and will have a total of 10 boxes on Monday, so it's first come first serve. PM me to tell me how much you want, in multiples of 150. If you want all of it, first to post "I'll Take It" wins.
Ammo is currently in Philadelphia PA, but I can go anywhere on the PATCO, Atlantic City, SEPTA, or Northeast Corridor rail lines. I've delivered to Trenton and Pennsauken before, as well as all over SE PA. I also have a base in Essex County, if you live out there I can get there relatively easily too. I'm keeping the little Winchester stickers, sorry!
-
-
Posts
-
-
Boom! Today all Newton is in the high $3.60s. All hail Bidenomics! And all that Alaska land he just took off the list of oil prospects. -
I have a like new (only zeroed) PSA Sabre KAC M110 Clone in 7.62x51mm. This is PSA's clone version of the infamous Knights Armament M110. Very high quality, excellent 2 stage trigger, 20" chrome lined barrel, adjustable gas block, and is NJ legal with a pinned Surefire SOCOM muzzle brake. Radian Raptor charging handle and Radian ambi safety. Upper and lower are billet receivers compatible with all KAC SR-25 and LMT MWS/MARS-H pattern receivers. Im no where close to being a long range shooter but ive been able to get 0.7 MOA out of it with 175gr federal gold medal match ammo and Im sure the rifle is capable of much better accuracy. Asking $1650 (which is a steal for what you get) at any FFL thats a reasonable distance from Jersey City. I can also ship but that would be on your dime. Optic/bipod etc not included but can be purchased if interested. Vortex Razor Gen-II HD 3-18x50 FFP with the new EBR-7C MRAD illuminated reticle in a 1.54 reptilia mount. Id include the optic for another $1700. Happy to answer any questions or provide more pictures. Not interested in any trades. Thank you. -
Selling 1 sealed spam can Romanian 7.62x54r ammo containing 440 rounds. 1982 manufacture. Steel core light ball, copper washed steel case. Not reloadable. Corrosive primer. The rust you see on the top is light surface rust. Can is intact. Comes with opener. $285.00 cash. I live in NW Burlington County, and work in Trenton. I can meet you at a reasonable distance to make sale. The first to reply “I’ll take it” wins the sale. -
Still want to put your dog in kennel? https://newjersey.news12.com/police-crews-rescue-46-dogs-from-fire-inside-pio-costa-industrial-complex-in-fairfield
-
-
