Jump to content

Recommended Posts

Please read this entire post, there is a lot of information, please read read all of it before making a decision. I am selling ALL of my reloading equipment, everything set up for 9mm, 45 ACP, 223, and 308.

I will not ship Large or Hazmat items, pick up local in the Manalapan area. I am willing to drive 10 miles in any direction. For large orders I would consider driving further.

I can ship small items on your dime. Keep in mind, bullets are small but very heavy, shipping them will be expensive

 

My pricing methodology is simple, all prices are based on retail prices as of 6/29/2022:

All hardware, whether New or Used, is 10% below amazon prices.

Bullets are full retail price per powder valley and Berry’s prices for un-opened boxes. 10% below retail for loose bullets

All prices are rounded to the nearest dollar

There is always room to negotiate price as long as the offers are reasonable. But all negotiations must be completed prior to delivery, not during the delivery (I had a bad experience with this).

 

First “I’ll take it” in the thread, not via PM, gets the sale.

If we are negotiating via PM and someone says “I’ll take it” in the thread during negotiations, the “I’ll take it” gets the sale.

 

Most items can be purchased separately but some will need to be combined for obvious reasons. Here is the extensive list. Photos will be provided upon request, there are too many to put into the post.

 

I accept Cash or Paypal as gift

  

Hornady LnL Shell Plates – Sold individually

#1                                                                                  - $36

#16                                                                                - $36

#25                                                                                - $36

 

Hornady Custom Grade New Dimension 2-Die Set – Sold individually

.223 (2 LnL Bushings Installed - $12)                             - $60

.308 (with spare zip spindle, expander and 2 decapping pins - $12)                             - $60

 

Hornady Custom Grade New Dimension 3-Die Set – Sold individually

.45 ACP (3 LnL Bushings Installed - $18)                        - $68

 

Case Prep – Sold individually

Lyman 7832323 Reloading 223 Case Length/Headspace Gauge                                                                                                             - $19

Lyman Reloading 308 Win Case Length/Headspace Gauge                                                                                                                      - $19

Lyman Reloading 40 S and W Pistol Max Cartridge Gauge                                                                                                                        - $15

Lyman Multi-Caliber Large Rifle Ammo Checker                                                                                                                                          - $42

 

Priming – as a set - $54 Total

   Lee auto primer                                                                                                                  - $31

   Lee shell holders                                                                                                                - $23

 

Bullet feeder

45 ACP – as a set - $87 Total

   Hornady LnL Bullet feeder die (1 LnL Bushings Installed - $6)                                 - $48

   Hornady Lock-N-Load Bullet Tube set                                                                          - $39

 

Misc - Sold individually

Hornady Powder cop                                                                                                          - $40

Lyman, Brass Smith Powder Trickler (New)                                                                    - $27

Frankford Arsenal Quick-N-EZ Impact Bullet Puller                                                       - $12

Lee universal decapping die with 2 spare pins                                                                - $20

 

Bullets – Sold by caliber (all available per caliber must be bought together)

Hornady Interlock 150 gr SP .308 (.308/7.62) – 500 Unopened (5 boxes) 21 loose – 521 in total    - $149

Hornady Match 68 gr HPBT .224 (.223/5.56) – 53 loose                                                                           - $11

Hornady 180 gr TMJ RNFP .401 (.40 S&W) – 547 loose                                                                             - $103

Berry’s 230 gr Plated RN .451 (.45 ACP) – 403 loose                                                                                  - $77

Share this post


Link to post
Share on other sites
On 7/1/2022 at 7:02 AM, MartyZ said:

PM sent

 

2 hours ago, joe guerro said:

hello trying to email you  

 

 

2 hours ago, MartyZ said:

Use PM. I sent you a message 2 days ago

Joe, you have not yet read the original PM I sent you 2 days. Please respond via PM by end of day tomorrow, 7/4. If you don't I will have to put the items back up for sale. If we can't communicate, we can't proceed with the sale.

Share this post


Link to post
Share on other sites

Nobody wants reloading equipment?

Ok, lets do this then. If you find any item I am selling at a lower price online from a reputable retailer, not ebay, could be a sale, but no coupon codes.

I will give it to you for 10% below that listed price. But items that are sold as a set still remain as a set.

Share this post


Link to post
Share on other sites
On 6/30/2022 at 6:13 PM, MartyZ said:

Frankford Arsenal Platinum Series Rotary Tumbler with 7-Liter Capacity                                                                                               - $135

Does this come with the SS pins?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By BigAl43
      RCBS Chargemaster 1500 for sale.  Works great but I don't use it anymore.
      Located in South Jersey near Philly.
      $250 + Shipping, FTF possible depending on location
      First to post "I'll take it" wins.

    • By BigAl43
      For Sale: 1000 each Hornady 6.5MM 140 grain ELDM projectiles. Lot #2211549
      This is NOT loaded ammunition!
      $400 shipped.
      First to post "I'll take it" wins.
       

    • By Mr.Stu
      I was staff at the Battle For The North Coast USPSA match a couple of weeks ago. I won a certificate for a new Glock at the staff dinner. I already have several Glocks which fulfil my needs so I'm putting it up for sale.
      The certificate is good for the following guns free of charge:
      9mm: G17, G17 Gen5, G19, G19 Gen5, G26. G26 Gen5, G43, G43X MOS, G48 MOS, G45
      .40S&W: G22, G22 Gen5, G23, G23 Gen5, G27, G27 Gen5
      .357Sig: G31, G31 Gen4, G32, G32 Gen4, G33, G33 Gen4
      .380: G42
      .22LR: G44
      .45GAP: G37, G37 Gen4, G38, G39
       
      There are other models available with an upgrade fee which is taxable (just the upgrade fee, not the whole price of the gun)
      $58 Upgrade:
      10mm: G20, G20SF, G29, G29SF
      .45ACP: G21SF, G21 Gen4, G30 Gen4, G30SF, G30S, G36FGR
      $71 Upgrade fee:
      9mm: G19 Gen5 MOS, G45 MOS, G47 Gen5 MOS
      $90 Upgrade fee:
      9mm: G19X (Coyote color only)
      $92 Upgrade fee:
      9mm: G34
      .40S&W: G35
      .45ACP: G41
      $156 Upgrade fee:
      9mm: G34 Gen5 MOS
      10mm: G40 Gen4 MOS
      .45ACP: G41 Gen4 MOS
      The actual list of guns is here: https://photos.app.goo.gl/w3GnW1DjwepoGebH8
      You can also choose to add Glock night sights for $67 or, if ordering a Gen5 model, Ameriglo Bold sights for $90.
      The certificate is valid until 12/31/2024. You would need to fill it out and send it with a copy of your FFL's license to Glock. They would then send the gun to your FFL for transfer to you. You are responsible for all FFL fees.
      I'm looking for $475 for the certificate. As there is no actual firearm being transferred, just a certificate, there is no permit required, although you will need one if you are an NJ resident so your FFL will be able to transfer the gun to you.
      The first to post "I'll take it" wins the sale.
    • By Taylor Ham
      I have a Custom Radian 10.5 OTHER(Pistol) rifle with a 9MM Noveske match barrel. This is a OTHER with a 10.5 PINNED SLR Linear Hybrid Comp with a total of 26 " in overal length. Buyer has the ability to use this a OTHER (if legal in your state) Pistol or register it as a SBR per your states requirements. You also have the ability to remove the 9MM perm Mag Block and barrel and convert it back to 556 or 300 black out as the Radian build kit upper and lower are for AR 15 style. As far as this PCC this is the devil in disguise YOU WILL not find a better shooting 9MM PCC type rifle period. The applications for use of this rifle are enldess, the Noveske barrel are one of the best in the market. The barrel has barely had 500 rounds on it, and shoots MOA up to a 100 yards with out a doubt. Buyer pays for FFL shipping and buyer must comply with local state laws. This winner will get everything in the pictures including 4 Colt Steel 9MM 10/30 Mags long and 4 shorty Colt 9mm 10 round mag total of 8 mags.
       
       
      I am in Northern NJ and will meet at local FFL in Pinebrook, or of your choice.
      I am asking for $2000 cash (no trades price is firm) or electronic transfer via Apple pay or your  payment method. ,This new price will not include the OPTIC AND KAC RISER, everything else you see you get. This is well north of 3k plus when you add up what you have, making room in my safe.
       
       
       
       
       
       
      The Build and whats included.

      RADIAN BUILDERS KIT
      1x Billet Upper Receiver w/Dust Cover, Anti-Rotation Pin & Light Weight Forward Assist Installed
       
      1x Hand Guard w/Magpul M-LOK® Modular Attachment Interface
       
      1x Radian AX556 Lower Receiver
       
      1x Raptor-SD Ambidextrous Charging Handle
       
      1x Radian Talon 45/90 Ambidextrous Safety Selector
       
      1x Ambidextrous Bolt Catch & Release
       
      1x Ambidextrous Magazine Release
       
      1x Enhanced Takedown Pin Set
       
      1x Aluminum Barrel Nut
       
      1x Barrel Nut Wrench
       
      4x Hand Guard Cross Bolts, Washers & Nuts

      NOVESKE BARREL

      10.5” 416R Stainless 9x19mm with 1:12 right hand twist
      • Barrel extension w/extended feed ramps
      • ½” x28 muzzle threads
      • Weight is 18.5 oz


      ATC AR GOLD TRIGGER
      3.5 lbs. (Fixed Weight) Drop Safe Drop-In Module (easy installation) Uses .154 pins Shortest Reset Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal, 6.5 Creedmoor and 9MM/PCC’s) 30 Day Money Back Guarantee Made in USA Used by Top Competitive shooters including Jerry Miculeck and Daniel Horner SLR Linear Hybrid Comp 9mm
      Synergy Linear Hybrid Compensator 9mm 
      Melonite Finish 416 Stainless Steel Core with  G5 Titanium Sleeve
      Adds 1.52" inches to barrel
      1/2x28 Threading
      1.25" OD
      2" OAL
      4.4 oz

      Holosun AEMS Core red dot 
      EMS-Core-Green features Holosun’s Green Super LED and includes 8 daylight and 4 night vision compatible intensity settings, a precision 2MOA, and Shake Awake technology. A side mounted battery trays houses a 2032 battery which provides up to 50k hour battery life. AEMS-Core-Green strikes a balance between performance and features for users of any level.
      KAC Sky Scraper
      Aimpoint Micro NVG High Rise Mount By lifting the optic up higher you can clear lights, lasers and any other items that can obstruct your sight picture. With our new Aimpoint Micro NVG mount, we push the boundaries further than before. With a height of 2.33” from the top of your 1913 pic rail to the center point of your optic, you now have the ability to see your irons through the mount. We have also integrated a section of 1913 rail, so you can run Aimpoint or Eotech magnifiers.

      HAHN PRECISION AR-15/M16 9MM DROP-IN CONVERSION BLOCK
      Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral “leg” hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount.






  • Posts

×
×
  • Create New...