-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By BigAl43
RCBS Chargemaster 1500 for sale. Works great but I don't use it anymore.
Located in South Jersey near Philly.
$250 + Shipping, FTF possible depending on location
First to post "I'll take it" wins.
-
By BigAl43
For Sale: 1000 each Hornady 6.5MM 140 grain ELDM projectiles. Lot #2211549
This is NOT loaded ammunition!
$400 shipped.
First to post "I'll take it" wins.
-
By Mr.Stu
I was staff at the Battle For The North Coast USPSA match a couple of weeks ago. I won a certificate for a new Glock at the staff dinner. I already have several Glocks which fulfil my needs so I'm putting it up for sale.
The certificate is good for the following guns free of charge:
9mm: G17, G17 Gen5, G19, G19 Gen5, G26. G26 Gen5, G43, G43X MOS, G48 MOS, G45
.40S&W: G22, G22 Gen5, G23, G23 Gen5, G27, G27 Gen5
.357Sig: G31, G31 Gen4, G32, G32 Gen4, G33, G33 Gen4
.380: G42
.22LR: G44
.45GAP: G37, G37 Gen4, G38, G39
There are other models available with an upgrade fee which is taxable (just the upgrade fee, not the whole price of the gun)
$58 Upgrade:
10mm: G20, G20SF, G29, G29SF
.45ACP: G21SF, G21 Gen4, G30 Gen4, G30SF, G30S, G36FGR
$71 Upgrade fee:
9mm: G19 Gen5 MOS, G45 MOS, G47 Gen5 MOS
$90 Upgrade fee:
9mm: G19X (Coyote color only)
$92 Upgrade fee:
9mm: G34
.40S&W: G35
.45ACP: G41
$156 Upgrade fee:
9mm: G34 Gen5 MOS
10mm: G40 Gen4 MOS
.45ACP: G41 Gen4 MOS
The actual list of guns is here: https://photos.app.goo.gl/w3GnW1DjwepoGebH8
You can also choose to add Glock night sights for $67 or, if ordering a Gen5 model, Ameriglo Bold sights for $90.
The certificate is valid until 12/31/2024. You would need to fill it out and send it with a copy of your FFL's license to Glock. They would then send the gun to your FFL for transfer to you. You are responsible for all FFL fees.
I'm looking for $475 for the certificate. As there is no actual firearm being transferred, just a certificate, there is no permit required, although you will need one if you are an NJ resident so your FFL will be able to transfer the gun to you.
The first to post "I'll take it" wins the sale.
-
By Taylor Ham
I have a Custom Radian 10.5 OTHER(Pistol) rifle with a 9MM Noveske match barrel. This is a OTHER with a 10.5 PINNED SLR Linear Hybrid Comp with a total of 26 " in overal length. Buyer has the ability to use this a OTHER (if legal in your state) Pistol or register it as a SBR per your states requirements. You also have the ability to remove the 9MM perm Mag Block and barrel and convert it back to 556 or 300 black out as the Radian build kit upper and lower are for AR 15 style. As far as this PCC this is the devil in disguise YOU WILL not find a better shooting 9MM PCC type rifle period. The applications for use of this rifle are enldess, the Noveske barrel are one of the best in the market. The barrel has barely had 500 rounds on it, and shoots MOA up to a 100 yards with out a doubt. Buyer pays for FFL shipping and buyer must comply with local state laws. This winner will get everything in the pictures including 4 Colt Steel 9MM 10/30 Mags long and 4 shorty Colt 9mm 10 round mag total of 8 mags.
I am in Northern NJ and will meet at local FFL in Pinebrook, or of your choice.
I am asking for $2000 cash (no trades price is firm) or electronic transfer via Apple pay or your payment method. ,This new price will not include the OPTIC AND KAC RISER, everything else you see you get. This is well north of 3k plus when you add up what you have, making room in my safe.
The Build and whats included.
RADIAN BUILDERS KIT
1x Billet Upper Receiver w/Dust Cover, Anti-Rotation Pin & Light Weight Forward Assist Installed
1x Hand Guard w/Magpul M-LOK® Modular Attachment Interface
1x Radian AX556 Lower Receiver
1x Raptor-SD Ambidextrous Charging Handle
1x Radian Talon 45/90 Ambidextrous Safety Selector
1x Ambidextrous Bolt Catch & Release
1x Ambidextrous Magazine Release
1x Enhanced Takedown Pin Set
1x Aluminum Barrel Nut
1x Barrel Nut Wrench
4x Hand Guard Cross Bolts, Washers & Nuts
NOVESKE BARREL
10.5” 416R Stainless 9x19mm with 1:12 right hand twist
• Barrel extension w/extended feed ramps
• ½” x28 muzzle threads
• Weight is 18.5 oz
ATC AR GOLD TRIGGER
3.5 lbs. (Fixed Weight) Drop Safe Drop-In Module (easy installation) Uses .154 pins Shortest Reset Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal, 6.5 Creedmoor and 9MM/PCC’s) 30 Day Money Back Guarantee Made in USA Used by Top Competitive shooters including Jerry Miculeck and Daniel Horner SLR Linear Hybrid Comp 9mm
Synergy Linear Hybrid Compensator 9mm
Melonite Finish 416 Stainless Steel Core with G5 Titanium Sleeve
Adds 1.52" inches to barrel
1/2x28 Threading
1.25" OD
2" OAL
4.4 oz
Holosun AEMS Core red dot
EMS-Core-Green features Holosun’s Green Super LED and includes 8 daylight and 4 night vision compatible intensity settings, a precision 2MOA, and Shake Awake technology. A side mounted battery trays houses a 2032 battery which provides up to 50k hour battery life. AEMS-Core-Green strikes a balance between performance and features for users of any level.
KAC Sky Scraper
Aimpoint Micro NVG High Rise Mount By lifting the optic up higher you can clear lights, lasers and any other items that can obstruct your sight picture. With our new Aimpoint Micro NVG mount, we push the boundaries further than before. With a height of 2.33” from the top of your 1913 pic rail to the center point of your optic, you now have the ability to see your irons through the mount. We have also integrated a section of 1913 rail, so you can run Aimpoint or Eotech magnifiers.
HAHN PRECISION AR-15/M16 9MM DROP-IN CONVERSION BLOCK
Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral “leg” hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount.
-
-
Posts
-
By Gregory Sutton · Posted
Looking to let the lwrc go this weekend, 1100 for this weekend! -
Sold Pending Funds. Will update when it's final or becomes available again.
-