Ray Ray 3,566 Posted July 4, 2009 This is my Stag model 2L. Real basic as I don't have the funds to upgrade it. I want to get a EOTech red dot with the 3X magnifier but that's expensive. Other than that, she's going to look pretty much stock. I have added a hogue grip (updated photo coming tomorrow) which feels so much better than the hard plastic grip that came with it. 4 Quote Share this post Link to post Share on other sites
Chad 3 Posted July 4, 2009 Heres mine....OLD SCHOOL!!!! BE ADVISED: THE MAGAZINE IS PERMANENTLY WELDED AND BLOCKED TO ONLY ACCEPT 15 ROUNDS. BE FURTHER ADVISED: THE COMPENSATOR IS PERMANENTLY ATTACHED BY THE FACTORY. Quote Share this post Link to post Share on other sites
Caine 147 Posted July 4, 2009 Daniel Defense M4 - pinned MOE stock - pinned/welded PWS FSC556 compensator - Magpul MIAD grip - Arms-and-Ammo PERMANENTLY MODIFIED 15rnd PMag - BlueForceGear UDC sling. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted July 4, 2009 Nice Caine, i like all the rails. Do you have the rail covers? Chad, permanantly welded, how do you load the rifle? 1 Quote Share this post Link to post Share on other sites
Caine 147 Posted July 4, 2009 Nice Caine, i like all the rails. Do you have the rail covers? It has rail "ladders" instead of covers at the moment - hard to see them in the pic tho. Quote Share this post Link to post Share on other sites
Chad 3 Posted July 4, 2009 Nice Caine, i like all the rails. Do you have the rail covers? Chad, permanantly welded, how do you load the rifle? I don't load the rifle, I load the magazine. The bottom plate on the magazine is welded shut with a block inside which will only allow 15 rounds max to be loaded into the magazine. Which according to the Firearms Unit of the State Police is perfectly acceptable and considered Permanent. It is not welded to the rifle, it is welded to itself. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted July 4, 2009 Nice Caine, i like all the rails. Do you have the rail covers? Chad, permanantly welded, how do you load the rifle? I don't load the rifle, I load the magazine. The bottom plate on the magazine is welded shut with a block inside which will only allow 15 rounds max to be loaded into the magazine. Which according to the Firearms Unit of the State Police is perfectly acceptable and considered Permanent. It is not welded to the rifle, it is welded to itself. Oh, I thought you meant the magazine is welded in place. So you can still switch mags from 5 to 10 to 15 if you wanted to. 1 Quote Share this post Link to post Share on other sites
Chad 3 Posted July 4, 2009 Yes, absolutely. My wording was a little off, that is what it sounded like! lol Nothing is modified on the rifle...just the magazines themselves are blocked and welded. Quote Share this post Link to post Share on other sites
djg0770 481 Posted July 6, 2009 Interesting thought. If the mag is welded to the rifle and no longer 'removable' then do capacity limitations apply? Quote Share this post Link to post Share on other sites
tj462nj 32 Posted July 6, 2009 I have the Hogue grip on my Busmaster, big difference. I have the EOTech 512 with the Aimpoint 3x magnifier added. Quote Share this post Link to post Share on other sites
tinyboy 1 Posted July 6, 2009 man you guys got some nice stuff. I only have a Bushmaster with a few 10 rd mags I feel so vulnerable! Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted July 7, 2009 I have the Hogue grip on my Busmaster, big difference. I have the EOTech 512 with the Aimpoint 3x magnifier added. Then you must post pics TJ, that is what this thread is all about! :mrgreen: and tinyboy, too! 1 Quote Share this post Link to post Share on other sites
Tosser 61 Posted July 15, 2009 Bushy Upper and Lower Sully Stock Houge Grip MI Fixed BUIS XS Big Dot Front Sight Eotech 552 1 Quote Share this post Link to post Share on other sites
Caine 147 Posted July 15, 2009 Every time I see a Sully stock I kick myself for not building another AR to put one on already :oops: Nice lookin AR, Tosser Quote Share this post Link to post Share on other sites
mjsemtex 0 Posted July 21, 2009 Every time I see a Sully stock I kick myself for not building another AR to put one on already :oops: Nice lookin AR, Tosser kick yourself again... Quote Share this post Link to post Share on other sites
Lublin 3 Posted July 21, 2009 My Bushmaster M4 model number PCWA3X_14M4IZ MGI D-Ring Ergo Sure Grip Tactical Deluxe Troy Medieval Muzzle Brake GG&G-1297 GG&G Tactical Modular Bolt On Flip Up Front Sight Gas Block GG&G-1005-SA A2 Spring Actuated BUIS LaRue Tactical SPR-E scope mount Weaver Classic Extreme 1.5-4.5x24mm scope Butler Creek scope caps 15 round Magpul PMags Quote Share this post Link to post Share on other sites
lunker 274 Posted July 21, 2009 My new, bone stock (for now), Colt Match Target Quote Share this post Link to post Share on other sites
Lublin 3 Posted July 21, 2009 My new, bone stock (for now), Colt Match Target Beautiful! Quote Share this post Link to post Share on other sites
oldslabsides 2 Posted July 21, 2009 mjsemtex, Nice rifle ! I'm doing my first build and would like to know what you've got there. What type of barrel, comp,free float tube, gas block, and sights ? Quote Share this post Link to post Share on other sites
mjsemtex 0 Posted July 21, 2009 mjsemtex, Nice rifle ! I'm doing my first build and would like to know what you've got there. What type of barrel, comp,free float tube, gas block, and sights ? barrel: noveske 16.1" recon 5.56mm (with their own lo-profile gas block) muzzle device: PWS FSC556 (pinned / welded) forearm: yankee hill customizeable free float forearms system (rifle length) sights: yankee hill forearm mounted front fixed sight / solid A2 rear sight upper: vltor mur-1a lower: sabre defence XR-15 trigger / parts kit: RRA 2-stage NM, KNS non-rotational pins, RRA parts kit grip: magpul MIAD buttstock: defensive edge sully stock Quote Share this post Link to post Share on other sites
oldslabsides 2 Posted July 21, 2009 Very nice. I had wanted to do a mid-length gas system. Quote Share this post Link to post Share on other sites
mjsemtex 0 Posted July 21, 2009 Very nice. I had wanted to do a mid-length gas system. not that you can tell from the pic but, this barrel is a mid-length gas system. http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=b-16-556&cat=17&page=1&search=&since=&status= my original intent was a sort of 'dissipator' setup with the longer (rifle length) sight radius combined with the 16" barrel. Quote Share this post Link to post Share on other sites
oldslabsides 2 Posted July 22, 2009 Actually, I did know. I checked out that barrel before. I must say that your rifle is the nicest looking I've seen. I don't really like the carbine handguards with what looks like a mile of barrel coming out of it. Just researched and found that the Bushmaster Dissipator is not even a mid-length gas system. It's got a carbine length gas system and block under the full length hand guard and the front sight is just a sight, not a gas block. Go figure. Really like the YHM stuff as well. Do you have the end cap on the free float tube ? Quote Share this post Link to post Share on other sites
mjsemtex 0 Posted July 22, 2009 Actually, I did know. I checked out that barrel before. I must say that your rifle is the nicest looking I've seen. I don't really like the carbine handguards with what looks like a mile of barrel coming out of it. thanks a lot. and i do like being able to extend my grip way out to the end of the handguard on this setup. the solid sully stock balances the extra weight nicely (not that any of it is terribly heavy). Really like the YHM stuff as well. Do you have the end cap on the free float tube ? yeah, they make some nice (and very reasonably priced) components. i don't have the cap at the moment, i might pick one up in the future. i did notice some warmth on that tube after a few mags but i don't think the cap would make that any worse and it's not often i go dumping mags. Quote Share this post Link to post Share on other sites
Caine 147 Posted July 24, 2009 Every time I see a Sully stock I kick myself for not building another AR to put one on already :oops: Nice lookin AR, Tosser kick yourself again... Dam you! I'm waiting on custom engraved lower that should be here in about a month, and then I'll finally have something to put my sully on. Awesome AR tho. The more I see builds with those types of free float tubes, the more I like them! Nicely done! Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted October 2, 2009 Bump I wanna see more black rifle! Quote Share this post Link to post Share on other sites
Caine 147 Posted October 4, 2009 Not a complete AR yet... but I finally installed my Sully stock! Lower is a custom Mega lower that was part of a group buy on another forum I'm on. Internals are a CMMG LPK with a Magpul trigger guard and a Magpul MIAD. And what makes this a little different... (yes, it's still semi-auto - selector doesn't go past "undead") It will probably end up with a BCM Mid-length upper... but we'll see. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted October 4, 2009 Nice Pete, keep us updated on the progress. Getting ready for the outbreak? Me too! Quote Share this post Link to post Share on other sites
AntZ 1 Posted October 4, 2009 I don't remember seeing "undead" and "outbreak" on an AR lower. Edit: Never mind. Just saw the explaination. Quote Share this post Link to post Share on other sites
Caine 147 Posted October 4, 2009 Getting ready for the outbreak? Me too! Always! Quote Share this post Link to post Share on other sites