redtornado23 0 Posted August 5, 2014 not complete but hopefully i'll have the rest of my parts this weekend. Thanks to Midwest PX for a great deal on the WMD NibX bcg... Quote Share this post Link to post Share on other sites
DeerSlayer 241 Posted August 5, 2014 I figure this picture belongs here. Quote Share this post Link to post Share on other sites
silverado427 10,679 Posted August 6, 2014 I figure this picture belongs here. tapatalk_1407275183316.jpeg I'm guessing thats cordless. Quote Share this post Link to post Share on other sites
JayWilling 33 Posted August 6, 2014 Hi guys, Maybe I'm missing something here, but doesn't the vertical foregrip constitute a second "evil feature"? Or are all of these photos from PA? Quote Share this post Link to post Share on other sites
blksheep 466 Posted August 6, 2014 Totally legal. Quote Share this post Link to post Share on other sites
redtornado23 0 Posted August 6, 2014 A. semi-automatic rifle that has the ability to accept a detachable magazine and has at least 2 of the following:a folding or telescoping stock;a pistol grip that protrudes conspicuously beneath the action of the weapon**;a bayonet mount;a flash suppressor or threaded barrel designed to accommodate a flash suppressor; anda grenade launcher **the vertical grip under the handguard is not below the action of the weapon Quote Share this post Link to post Share on other sites
JonF 79 Posted August 6, 2014 Starting a new assembly from scratch with these guys: 2A Balios Lite receiver set. Aiming for under 5lb before optics. Quote Share this post Link to post Share on other sites
JayWilling 33 Posted August 7, 2014 Huh!!! All this time I just ASSUMED it was an evil feature. What a dope. I guess that's why my wife never listens to me. Quote Share this post Link to post Share on other sites
sosa9999 5 Posted August 7, 2014 Huh!!! All this time I just ASSUMED it was an evil feature. What a dope. I guess that's why my wife never listens to me. Don't feel too bad. I misunderstood it as well. Quote Share this post Link to post Share on other sites
DeerSlayer 241 Posted August 7, 2014 Huh!!! All this time I just ASSUMED it was an evil feature. What a dope. I guess that's why my wife never listens to me.That's why you're here! To learn, our laws are very confusing. Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted August 8, 2014 My rollin' 'round gat is complete Mostly a spare parts build that travels with me. Not seen but on the other side is a 300 lumen TLR1 in a cantilever mount. I know it's a pistol light that's optimized for 50 yards but given my purposes, should I ever need to deploy a carbine, I don't see the need to engage a target further than 50 yards as that's going to be hard to argue as an immediate threat to my safety. 16" LMT barreled upper PX NiB BCG Noveske N4 lower LMT two stage trigger I think the rest of the build is pretty self explanatory. Quote Share this post Link to post Share on other sites
redtornado23 0 Posted August 10, 2014 not the best pic in the world, but my new baby home after her first 100 rounds this morning - four different loads of brass and steel, ran great no matter what was in the mag. big thanks to Steve at Monmouth Arms for the pin and weld job on the brake. Quote Share this post Link to post Share on other sites
mipafox 438 Posted August 10, 2014 How do you guys get around the grenade launcher thing? Do they not count 37mm flare launchers as an evil feature? Quote Share this post Link to post Share on other sites
checko 180 Posted August 10, 2014 As I understand it there are currently no 37mm grenades. So its only a flare launcher. Quote Share this post Link to post Share on other sites
mipafox 438 Posted August 10, 2014 As I understand it there are currently no 37mm grenades. So its only a flare launcher. Well, there's gas (not NFA surprisingly), and there is behive, baton, buckshot, rubber buckshot, and flechete. The last 5, and anything anti personnel whether lethal or non-lethal, requires the 37mm launcher to be NFA registered as a destructive device. Same as an M-203. I didn't think destructive devices were permitted in NJ, so what would the point of this evil feature be? But it sounds like you guys have figured out it doesn't count as an evil feature for whatever reason, and that was my question. Thanks. Quote Share this post Link to post Share on other sites
checko 180 Posted August 10, 2014 Well, there's gas (not NFA surprisingly), and there is behive, baton, buckshot, rubber buckshot, and flechete. The last 5, and anything anti personnel whether lethal or non-lethal, requires the 37mm launcher to be NFA registered as a destructive device. Same as an M-203. I didn't think destructive devices were permitted in NJ, so what would the point of this evil feature be? But it sounds like you guys have figured out it doesn't count as an evil feature for whatever reason, and that was my question. Thanks. Isn't the NFA stamp on the rounds and not the launcher? Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted August 10, 2014 Isn't the NFA stamp on the rounds and not the launcher? Both. Quote Share this post Link to post Share on other sites
mipafox 438 Posted August 10, 2014 Isn't the NFA stamp on the rounds and not the launcher? Both. No. Anti-personnel rounds, including stun rounds, rubber rounds, other non-lethal rounds, or lethal rounds such as buckshot/beehive turn the launcher into a Destructive Device because it has a rifled bore larger than .50 inch and is no longer exempted as a flare gun because it is being used as a weapon (lethal or not). Neither the lethal ammo nor the non-lethal ammo require any stamp, just like any rifle or pistol ammo requires no stamp. It's the same stuff. If the projectile contains greater than 1/4 ounce of explosive (such as M406 High Explosive round) then the ammunition itself becomes an Explosive Destructive Device and then each round of ammo requires a stamp. Simply because of the explosive content. This would apply to an explosive projectile of less than 0.50 inch, even a normal rifle round, but I don't know of any round that size that holds that much explosive. The .50 caliber Raufoss MK211 Mod 0 High Explosive Armor Piercing Incendiary round is NOT an explosive destructive device, for example, and does not require a stamp. There are 20mm High Explosive Tracer (20mmx110mm Hispano) that have several grams of high explosive and are nor explosive destructive devices, although the autocannon itself has a bore larger than 0.50 inches and therefore is a destructive device. Quote Share this post Link to post Share on other sites
checko 180 Posted August 10, 2014 Ok so the launcher itself is just a hunk of steel, but when used in conjunction with another round is when it changes? Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted August 10, 2014 No. Anti-personnel rounds, including stun rounds, rubber rounds, other non-lethal rounds, or lethal rounds such as buckshot/beehive turn the launcher into a Destructive Device because it has a rifled bore larger than .50 inch and is no longer exempted as a flare gun because it is being used as a weapon (lethal or not). Neither the lethal ammo nor the non-lethal ammo require any stamp, just like any rifle or pistol ammo requires no stamp. It's the same stuff. If the projectile contains greater than 1/4 ounce of explosive (such as M406 High Explosive round) then the ammunition itself becomes an Explosive Destructive Device and then each round of ammo requires a stamp. My bad. My head had only considered the case of 40mm HE rounds. I forgot about all the other fun things you can put through those launchers. Quote Share this post Link to post Share on other sites
mipafox 438 Posted August 10, 2014 Ok so the launcher itself is just a hunk of steel, but when used in conjunction with another round is when it changes?40 mm is a DD. It is intended as a military weapon, period. Always DD, because it is a weapon with a rifled barrel > 0.50 in. 37 mm is intended as a flare launcher. It must be registered as DD before using with anti-personnel ammo because it has a rifled barrel &> 0.50 inches. Any projectile with > 1/4 oz of explosive must be registered as an Explosive Destructive Device. Quote Share this post Link to post Share on other sites
checko 180 Posted August 10, 2014 Got it. Thanks Quote Share this post Link to post Share on other sites
tuktuk 16 Posted August 11, 2014 if anybody looking/thinking for 37mm flare launcher hit me up Quote Share this post Link to post Share on other sites
RS1200XL 4 Posted August 15, 2014 I'll just give everyone a preview at what I just picked up for my next build..... PSA just released their AR-10, so I snagged the last one at the warehouse store. Unfortunately, they did not have a LBK at the store so it will be a little while before I finish the build. Anywho, for those interested, its a DPMS pattern so you can use the SR25 mags. Looks to be machined nicely but I've never seen a bad lower from PSA. The price was a little steep, I paid about $173 OTD with tax(no NICS due to CWP) but I wanted to get a low SN. For those looking I would give it a little time and get the "blem" lowers once those come out. Quote Share this post Link to post Share on other sites
svt3183 14 Posted August 16, 2014 Adams Arms XLP 16" mid length piston complete upper Samson 15" rail Spikes dynacomp Spikes Lower Geissele SSA-E trigger Magpul MOE rubber grip Magpul fixed stock Quote Share this post Link to post Share on other sites
JoeTK37 8 Posted August 18, 2014 I'll just give everyone a preview at what I just picked up for my next build..... PSA just released their AR-10, so I snagged the last one at the warehouse store. Unfortunately, they did not have a LBK at the store so it will be a little while before I finish the build. Anywho, for those interested, its a DPMS pattern so you can use the SR25 mags. Looks to be machined nicely but I've never seen a bad lower from PSA. The price was a little steep, I paid about $173 OTD with tax(no NICS due to CWP) but I wanted to get a low SN. For those looking I would give it a little time and get the "blem" lowers once those come out. Keep us posted on this one. It has me quite intrigued Quote Share this post Link to post Share on other sites
beaniam 5 Posted August 18, 2014 Just finished this build, thinking about the next. Quote Share this post Link to post Share on other sites
chrisfc923 14 Posted August 18, 2014 Finally completed... Quote Share this post Link to post Share on other sites
T Bill 649 Posted August 19, 2014 Very Nice. Build List? Quote Share this post Link to post Share on other sites
chrisfc923 14 Posted August 20, 2014 Very Nice. Build List? thx.. rainier upper spikes punisher lower ubr stock mega tac trigger phase 5 winter guard phase 5 EBR battlearms ambi safety mako fab grip diamondhead irons trijicon tr24g fortis shift grip rainier RAC failzero NiB bolt Quote Share this post Link to post Share on other sites