Sign in to follow this
Followers
0
-
Recently Browsing 0 members
No registered users viewing this page.
-
Use Promo Code "NJGF10" for 10% Off Regular Items
-
Supporting Vendors
-
Latest Topics
-
-
-
Similar Content
-
By 9X19
Anybody here own and shoot a Savage 99?
I am considering picking up a nice Savage 99 that was manufactured in 1907.
Love the way they look and feel. They were pretty much ahead of their time with some pretty neat features. Great looking looking levergun from the turn of the last century. Also been reading a little about Arthur Savage. He had a very interesting life. The model that I am looking at is chambered in 30/30.
-
By OfcrFek
Well, on June 10th I started researching and planning how to refinish and restore an old Remington 870 to its previous glory. 10 days later, I'm finally finished! Now I'm by no means a professional, and this was the first time I've ever tried to do this kind of work on a firearm, but I think it turned out ok...
I used Birchwood Casey's Cold Bluing Kit to strip all the rust and old splochy bluing off the barrel, receiver, and mag tube. Reblued it all with the same kit, doing a lot of work with some steel wool in between coats, and using my girl's shower set to the hottest it would go to rinse all the compounds off after the allotted times.
This is pre and post re-blue of the barrel:
The stock was a little more difficult. I used some stripper agents to remove the old finish on the stock set. Then used a wet rag and iron to make the more serious dents pop back out. Then I took a sanding block to remove what finish was still there, and even the stock out over all (220 grain). Afterwards, I wiped the whole stock set down with some denatured alcohol a few times to clean it, and let it air dry. After I was sure it was dry and clean, I started applying the layers of stain (I used Gunstock 231 by Miniwax). Applied 3 layers of stain over about a 16 hour period, then let it completely dry for another 16 hours. After that, I applied a spray on Clear Semi-Gloss Polyurethane sealant (3 thin coats over about 6 hours), then gave it about 20 hours to completely dry. And bam, done.
This is the overall firearm:
Yes, that is duct tape holding the receiver together in the before pictures. Lol.
A special thanks goes out to Cowboy6373, Old School, usnmars, siderman, and Hare Trigger for all their instructions and advice on how to go about doing it!
-
-
Posts
-
It's not an estimate, it's a promise. NJ is the worst in the nation in so many ways. -
This "senior" left almost 5 years ago ... for this reason Just wish all the NJ/NY transplants up here would realize there's a reason they left. -
A deal like that might convince me to buy a Glock, too....
-
I’ve lived in my current house six years and they sent an inspector once, some time around when the lockdowns were starting to lift. They sent a postcard ahead of time, it said something like, “if you don’t let them in we’ll assume you added ten bedrooms and all your toilets are solid gold and tax you accordingly” (paraphrasing, obviously) -
From your lips to God’s ear. Or whatever the internet version of that is.
-
-
