HogLuvr 0 Posted June 14, 2012 While wiping down the barrel of my shotgun, I came up with a little bit of rust residue. Subsequent wiping with hopes continued to bring out residue. Any suggestions for gentle treatment? Quote Share this post Link to post Share on other sites
vjf915 456 Posted June 14, 2012 Do you mean the actual bore, or just the outside of the barrel? Quote Share this post Link to post Share on other sites
junkmanted 54 Posted June 14, 2012 WD40 and fine steel wool ,, rub gently Quote Share this post Link to post Share on other sites
Tactical Turtle 11 Posted June 14, 2012 I just wipe my guns down with oil. Never had any rust beside on my glock... Quote Share this post Link to post Share on other sites
HogLuvr 0 Posted June 14, 2012 Just on the outside of the barrel. Bore is clean. Fine steel wool? Isn't that still going to mar the bluing? Quote Share this post Link to post Share on other sites
lunker 274 Posted June 14, 2012 Oil and green scotchbrite pad. Quote Share this post Link to post Share on other sites
dave545 15 Posted June 14, 2012 Oil and green scotchbrite pad. +1 or brass brush Quote Share this post Link to post Share on other sites
siderman 1,137 Posted June 14, 2012 steel wool= 0000 or very fine scotchbrite and keep it wet with oil Quote Share this post Link to post Share on other sites
7-3-2 9 Posted June 14, 2012 I just had this on my pistol, and I found the perfect way to correct surface rust. Send it back to Ruger they fixed it and now my gun is as good as new. (sorry I know this wasnt helpful but I just wanted to boast a bit lol) Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted June 14, 2012 I just wipe my guns down with oil. Never had any rust beside on my glock... LOL, next time use the dry cycle on your dishwasher, everyone knows that.. Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted June 14, 2012 Keep the WD40 away from your gun. 0000 steel wool and CLP Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted June 14, 2012 Good suggestions, but I am not a fan of Steel Wool, I like Brass Wool, not a big deal on guns but I like the even softer metal as well as steel wool will rust and while you will clean any steel wool that get on your gun off, if by chance a small piece get lodged in a tight spot like around a scope mount or other location like that, it will promote rusting. Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted June 14, 2012 Good suggestions, but I am not a fan of Steel Wool, I like Brass Wool, not a big deal on guns but I like the even softer metal as well as steel wool will rust and while you will clean any steel wool that get on your gun off, if by chance a small piece get lodged in a tight spot like around a scope mount or other location like that, it will promote rusting. I use the Scothbite pad (a partially worn-out one so it's not too aggressive) and Barricade Oil, which seems to do the trick really nice, without any metal filing residue which will promote rust in tight places like Harry said. Quote Share this post Link to post Share on other sites
Dan 177 Posted June 14, 2012 Kroil and scotchbright pad. Very gently work it in , let it sit, then reapply and keep doing that till it is gone. Quote Share this post Link to post Share on other sites
A-Tech 8 Posted June 14, 2012 I haven't had to take rust of any guns, but for any of my tools that rust, I soak them in PB Blaster. Works like a charm. No scrubbing at all. Quote Share this post Link to post Share on other sites
T Bill 649 Posted June 16, 2012 You might want to try "Big 45 Frontier Metal Cleaner". I use it for cleaning bores and removing rust from any metal. Works great with Rem Oil or other "light" cleaner. Google it and I can say it does all they claim. Quote Share this post Link to post Share on other sites
RecessedFilter 222 Posted June 16, 2012 I was reading a very good article on firearm rust removal. The writer said not to use oil while using steel wool, but he also suggested, if I recall correctly, to not use steel wool..use something else. It frustrates me that I don't exactly remember this, so I am going to try to look for the article today. Quote Share this post Link to post Share on other sites
tony357 386 Posted June 16, 2012 Just use a rag and gun oil, you will most likely continue to get rust off your shotgun barrel it is part of the blueing process.. unless it is pitted then you should follow the directions to spot blue it.. Quote Share this post Link to post Share on other sites
KpdPipes 388 Posted June 19, 2012 Just on the outside of the barrel. Bore is clean. Fine steel wool? Isn't that still going to mar the bluing? REALLY fine, as in 0000 fine, and i'd personally use Kroil as opposed to WD-40. Give it a good coat of Kroil, let it sit for 5 min then lightly hit it with the steel wool, it wont mar the bluing, i;ve done it on a few guns over the years and have had no issued with finish Quote Share this post Link to post Share on other sites
raz-0 1,259 Posted June 19, 2012 Keep the WD40 away from your gun. 0000 steel wool and CLP This is what I use. Squirt some on the gun, some on the steel wool, and rub with light pressure. Quote Share this post Link to post Share on other sites
Murphy4570 15 Posted June 21, 2012 Hit it with the bench wire wheel, just to be on the safe side. On a more serious note, I agree about using very fine steel wool and oil. I have used it on some firearm parts with good success, among many other things. Hope you have plenty of elbow grease. Quote Share this post Link to post Share on other sites
mikeyboyeee 66 Posted June 21, 2012 Neverdull wadding compound and not because my middle name is named after the founder (my father's great uncle). Quote Share this post Link to post Share on other sites