Sign in to follow this
Followers
0
WTS Winchester 94-44 Magnum (SOLD!)
By
chumo00, in Experience/Feedback
-
Recently Browsing 0 members
No registered users viewing this page.
-
Use Promo Code "NJGF10" for 10% Off Regular Items
-
Supporting Vendors
-
-
Latest Topics
-
-
-
Similar Content
-
By rifleman
Model 1891 Argentine Mauser 7.65 x 53 with bayonet. Not an exact match but fits pretty good. This fine weapon is an engineering marvel well over 100 years old. Ramp sight to 900 yards for harassing fire to prevent free movement in the enemy's camp. Steel is in pretty good condition. All threads have been lubricated and work fine. Crack in upper handguard & the stock was secured with 2 screws. I have shot this many times and he is a beast. If your'e looking for a shooter, Boyd's has replacement stocks and you can take your spot on the line with fine German craftsmanship.
Barrel has all the right stamps and marks according to several articles.
I had this gun for 35 years and time for a new home. I used to display it in my office with the bayonet but it looked way too scary.
22 boxes (440 rounds) of new ammo included. They go for $40 per box now!
Rifle, bayonet (with metal sheath) & ammo $450 or trade for 12g target ammo/silver. I can bring it to Central Jersey Rifle Pistol Club for inspection.
First reply I'll take it gets the prize
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By NewYorkCentralRailroad
Well folks, I'm back with another deal. I've seen what's been going on with 5.56 and .223 pricing, and I hate it as much as you do. I went to a gun show yesterday and people were selling Winchester Service Grade 5.56 for $0.65 per round for a 1000-round case. That's ludicrous, and AmmoSeek doesn't give much better prospects, so I'm here to give a few lucky people a deal. As of 10/23/2023, I will have in my possession 1500 rounds of Winchester White Box 5.56 in 150-round Range Packs. I don't need all of them, so I would like to give y'all some of them. The best deal for any 5.56 on AmmoSeek right now with free shipping is $0.51 per round for some Igman stuff.
I'm offering these packs at $73.50 per box, or $0.49 per round. That includes tax! This is the best price that I've found anywhere on the internet for LC 5.56. If you buy more, I might be able to work with you on the price a bit more. Again, I have 8 boxes right now, and will have a total of 10 boxes on Monday, so it's first come first serve. PM me to tell me how much you want, in multiples of 150. If you want all of it, first to post "I'll Take It" wins.
Ammo is currently in Philadelphia PA, but I can go anywhere on the PATCO, Atlantic City, SEPTA, or Northeast Corridor rail lines. I've delivered to Trenton and Pennsauken before, as well as all over SE PA. I also have a base in Essex County, if you live out there I can get there relatively easily too. I'm keeping the little Winchester stickers, sorry!
-
By salvatorejrc
I just got my FID for long guns, although I don't know anything about guns or ammo. What is a good gun to get my hands on that will help me learn more but won't break the bank, at the same time being ideal at home defense?
-
-
Posts
-
-
I reached out to Ridgewood Rifle Club after I saw an AD in NJARPC magazine. Their email is "[email protected]." They're primarily targeting JR/youth shooters and their parents as they only shoot .22 LR or Air Rifles on paper targets. Here's some more details: -
-
the communists are laying the groundwork for a november disaster, they will stop at nothing to keep themselves in power. indictments, disease, terrorism, assassination who knows what angle they are planning. what would biden do if the electrical infrastructure went down on november 4th and voting booths dont work? are the communists planning martial law to take our guns away? pay attention to the little hints that they are throwing out to the public, mark my words something is coming. -
It's not an estimate, it's a promise. NJ is the worst in the nation in so many ways.
-
-
