louu 399 Posted June 25, 2014 Colt Government .45acp & a Sig .22 I've noticed since buying and shooting 1911's, I have stopped looking at the other cases at the LGS. I go right for the 1911 gun porn now. I'm just not interested in anything else anymore. Get this http://www.zrtacticalsolutions.com/viewitem.php?productid=62 for your Sig it makes it a freaking tack driver. You may have to file the little nub on the bushing to make it fit in the slide but thats what you want, a tight fit to the barrel and the slide. Quote Share this post Link to post Share on other sites
louu 399 Posted June 25, 2014 Eh, it was cheap… 9mm How much was cheap??? Is it accurate? Quote Share this post Link to post Share on other sites
DeerSlayer 241 Posted June 25, 2014 Get this http://www.zrtacticalsolutions.com/viewitem.php?productid=62 for your Sig it makes it a freaking tack driver. You may have to file the little nub on the bushing to make it fit in the slide but thats what you want, a tight fit to the barrel and the slide. Thanks! Just ordered the kit. Quote Share this post Link to post Share on other sites
WhiskeyTangoFoxtrot 358 Posted June 25, 2014 How much was cheap??? Is it accurate? $350 used before transfer fees and shipping. It's more accurate than me. Quote Share this post Link to post Share on other sites
louu 399 Posted June 25, 2014 $350 used before transfer fees and shipping. It's more accurate than me. Good deal, my girl is in the market for a 9mm 1911 if her freakin permits ever get in. Quote Share this post Link to post Share on other sites
bhunted 887 Posted June 27, 2014 Took this to the range today, quite a plinker. Little rough on the hands considering I piped down a few hundred rounds down a 3" barrel... Wrist a tad sore. Sent from my iPad 2 using T2 Pro Quote Share this post Link to post Share on other sites
Blake 50 Posted July 1, 2014 Picked this guy up from TJ's today. Started it's life as a Rock Island 9mm just like David's pictured above and then went through a ton of enhancements. Slide was fitted to the frame, barrel was reverse crowned, gun was cerakoted navy then had the sides of the slide polished. S&A magwell/mainspring housing & Ambi safety, upgraded trigger, Dawson front sight, a few other things I can't think of off the top of my head. I didn't buy it and do all of this, I purchased it from a guy who put 50rds through it and moved onto the next project. The pics don't really do it justice, it's very pretty in person. Quote Share this post Link to post Share on other sites
WhiskeyTangoFoxtrot 358 Posted July 1, 2014 Picked this guy up from TJ's today. Started it's life as a Rock Island 9mm just like David's pictured above and then went through a ton of enhancements. Slide was fitted to the frame, barrel was reverse crowned, gun was cerakoted navy then had the sides of the slide polished. S&A magwell/mainspring housing & Ambi safety, upgraded trigger, Dawson front sight, a few other things I can't think of off the top of my head. I didn't buy it and do all of this, I purchased it from a guy who put 50rds through it and moved onto the next project. The pics don't really do it justice, it's very pretty in person. I'm inspired Quote Share this post Link to post Share on other sites
Screwball 483 Posted July 1, 2014 Ruger SR1911, which I've been very happy with. Other than the grips, only added stainless grip screws (think it gives a nice accent with black grips, and won't have a finish that wears off). I run two grips on the Ruger, depending on need. Most of the time, it has Magpul MOE grips. If I ever need to run a rail, I put on the Recover Tactical CC3 grips. Gives me a good rail mount, and only cost me $50. But the best is that it can go back to non-railed in a minute or two. The first picture is stock, but the other two are after I send it to LightFighter Innovations for stippling. Very good work, and happy to send business to a disabled veteran (Chris, the owner is a very good guy). Quote Share this post Link to post Share on other sites
seamusSU 0 Posted July 1, 2014 Picked this guy up from TJ's today. Started it's life as a Rock Island 9mm just like David's pictured above and then went through a ton of enhancements. Slide was fitted to the frame, barrel was reverse crowned, gun was cerakoted navy then had the sides of the slide polished. S&A magwell/mainspring housing & Ambi safety, upgraded trigger, Dawson front sight, a few other things I can't think of off the top of my head. I didn't buy it and do all of this, I purchased it from a guy who put 50rds through it and moved onto the next project. The pics don't really do it justice, it's very pretty in person. If it looks even better on person than damn! Looks excellent. Quote Share this post Link to post Share on other sites
Maciej 59 Posted July 3, 2014 Snapped these for my for sale ad, figure I can throw them into this thread as well... Quote Share this post Link to post Share on other sites
NEHackettstown 21 Posted July 3, 2014 My Springfield Armory Loaded. Cerakoted in coyote tan and green. Quote Share this post Link to post Share on other sites
twong11219 0 Posted July 5, 2014 This started off as a stock Spartan. Quote Share this post Link to post Share on other sites
BullzeyeNJ 104 Posted July 5, 2014 This started off as a stock Spartan. Very impressive. Its like turning a piece of coal into a diamond. This one shows alot of talent and precision from the gunsmith who did the work. Quote Share this post Link to post Share on other sites
Krdshrk 3,877 Posted July 5, 2014 Not mine - but I had to share it here.... Quote Share this post Link to post Share on other sites
Blake 50 Posted August 15, 2014 I decided to have the ria pictured a few posts above refinished. Got it back today. Here she is: Quote Share this post Link to post Share on other sites
T Bill 649 Posted August 15, 2014 Nice color scheme. Looks impressive. Quote Share this post Link to post Share on other sites
9X19 125 Posted August 21, 2014 According to the Colt letter, this one was born in 1955. 25% engraving. I usually don't like engraved guns, but this one kind of spoke to me. Quote Share this post Link to post Share on other sites
9X19 125 Posted August 21, 2014 Sorry bad cell phone pics. Nicer in person.. Quote Share this post Link to post Share on other sites
9X19 125 Posted August 21, 2014 I believe the front sight may have been a Colt custom shop option, but I have no way of knowing fo sure. Quote Share this post Link to post Share on other sites
9X19 125 Posted August 31, 2014 What happened? Did I break this thread? LOL Quote Share this post Link to post Share on other sites
1563621 388 Posted August 31, 2014 Pics don't load for me! Quote Share this post Link to post Share on other sites
JT Custom Guns 956 Posted August 31, 2014 O.K. - My Re-Done 2001 Springfield 1911 Loaded V-12: Quote Share this post Link to post Share on other sites
bhunted 887 Posted August 31, 2014 Pimp gun... Lol Quote Share this post Link to post Share on other sites
mag1 0 Posted September 1, 2014 O.K. - My Re-Done 2001 Springfield 1911 Loaded V-12: That a hot rod 1911 Quote Share this post Link to post Share on other sites
svt3183 14 Posted September 21, 2014 Sig Carry. Awesome gun for the money, including great trigger. Quote Share this post Link to post Share on other sites
svt3183 14 Posted September 21, 2014 Trojan 5.0 9mm - Super Shitty pic. Just picked up today. Shout out to STI - they asked my FFL if it was my first STI and when he said yes they installed a Dawson Precision tool-less guide rod worth 70 bucks free of charge. Quote Share this post Link to post Share on other sites
PD2K 115 Posted October 30, 2014 O.K. - My Re-Done 2001 Springfield 1911 Loaded V-12: That is pretty badass!!! Quote Share this post Link to post Share on other sites