Jump to content
Sign in to follow this  
dwh112

ATI Lowers in stock

Recommended Posts

didn't get to see what they were selling for, but keep checking ATI's site to order them directly. They haven't raised their price from $43. I got a couple of them in Jan and they shipped about 3 weeks after the order was placed (same as Palmetto).

Share this post


Link to post
Share on other sites

didn't get to see what they were selling for, but keep checking ATI's site to order them directly. They haven't raised their price from $43. I got a couple of them in Jan and they shipped about 3 weeks after the order was placed (same as Palmetto).

 

How are they? I heard that the pin holes do not match up

Share this post


Link to post
Share on other sites

How are they? I heard that the pin holes do not match up

 

The one that I used on my lightweight build was perfect. There was a slight gap between the upper and lower, but there was no play in the fit, and the pins went in just fine. Further, all of the other lpk parts went in just fine.

 

I ordered them not expecting much for the price, but was pleasantly surprised. I have a Noveske Gen II lower that is much prettier, and the finish is much better, but the fit is no different. I also have both Adcor & POF lowers that the fit is more loose, but again both of those lowers look nicer and have better finishing on them. I believe that "mil-spec" calls for some play between the upper and lower. I happen to not like this. My favorite combo in my Noveske N4 upper and lower that fit like a tight glove with no play at all.

Share this post


Link to post
Share on other sites

The one that I used on my lightweight build was perfect. There was a slight gap between the upper and lower, but there was no play in the fit, and the pins went in just fine. Further, all of the other lpk parts went in just fine.

 

I ordered them not expecting much for the price, but was pleasantly surprised. I have a Noveske Gen II lower that is much prettier, and the finish is much better, but the fit is no different. I also have both Adcor & POF lowers that the fit is more loose, but again both of those lowers look nicer and have better finishing on them. I believe that "mil-spec" calls for some play between the upper and lower. I happen to not like this. My favorite combo in my Noveske N4 upper and lower that fit like a tight glove with no play at all.

 

thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By ChrisS
      Savior Equipment American Classic Tactical Double Long Rifle. 36” Model. I bought this from Amazon along with the single rifle case to decide which I liked better. I don’t feel like going through the hassle of returning as it was bought through a third party seller so I figured I’d knock 43ish%  off the price ($70.36 incl tax) and pass it along to someone here that could use it. As new condition minus the tags. $40 cash and pick up in Freehold. 
       
      ******  The first to post "I'll take it" establishes the buyer. If there are issues and the deal falls apart, the item may be re-listed. ****

    • By Lone Shark
      Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.

      Included with Rifle:
      3 - Daniel Defense 10 rd. Mags.
      Daniel Defense Muzzle Climb Mitigator, Gen II.
      Magpul front and rear flip sights
      BipodDeflector Brake Kit
      Tipton Max Force carbon fiber cleaning rod.
      Daniel Defense full-latch impact plastic case
      380 rounds ammo.
      Monmouth County Area - $2,960.

      All Brand New - Never Fired - New Jersey Compliant
       
      The first to post "I'll take it" wins the sale.





    • By StanMan01
      Looking to sell an AR-15 with the following specs:
      Upper:
      Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
      Comp: VG6 Comp Pin and Welded by Tier 1
      Rail: PSA Lightweight 15" MLOK Rail
      BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group  purchased on October 9th 2020
      Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
      Lower:
      Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020. 
      LPK: PSA Lower Parts Kit
      Stock: RRA A2 Buttstock Kit, Black
      Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
      Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
      Magazines:
      2 - 10rd PMags Included
      Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
      Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
      Rounds Count:
      Upper has about 250 rounds down the pipe
      Lower: Maybe 50 Rounds
      Price: $SOLD
      Location: Essex or Monmouth County FFL
      Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws 
      First "I'll take it" gets it
      Can provide additional photos upon request.

    • By Swizz70
      Hello Gents,

      I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical.  Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.

      Here are some specs:

      300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
      GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
      Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
      {Nitride} M4 Extended Feed Ramps
      Nitride M4 Barrel Extension
      1:7 Twist Rate
      5/8×24 Thread Pitch
      Raptor Charging Handle

      Price: $695

      Pm or email me with any questions: [email protected]
      I am in Deptford NJ.
      THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
      A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)"  on this thread.

























    • By Zigzag22
      Hello, I am looking for somewhere to get my muzzle brake pinned on a budget. I am okay with shops in Southern NJ and PA.
      If anyone has any advice it would be greatly appreciated!
      Thank you!
  • Posts

×
×
  • Create New...