Jump to content

Recommended Posts

Oddly enough i really want one but cant justify the high prices they have right now. Someday when i find a deal.

 

I'm waiting for them to update the design...i love the rifle, but i hate the molded sights. if the price dropped i could probably justify one too.

Share this post


Link to post
Share on other sites

Oddly enough i really want one but cant justify the high prices they have right now. Someday when i find a deal.

Haven't rally priced these out but look they really cool. What are they going for currently and what is a good price in case I see one? May make a trip to Tanners again in Pa in a week.

Share this post


Link to post
Share on other sites

Oddly enough i really want one but cant justify the high prices they have right now. Someday when i find a deal.

I think there is a dealer on here selling one for Mid $800. That's pretty much pre CT

I had one in .40S&W and it was the most fun to shoot!  Accurate as hell! Sold it to compress calibers, some day I will get another in 9mm.  In the meantime, I did pick a HiPoint 995.

I'm poor (buy too much ammo) so I went with a 995 too. Maybe one day I'll own one.

Share this post


Link to post
Share on other sites

Just added the cx4 storm to my collection.  yeah, its awesome ..I'm going to need a couple thousands rounds of bulk 9mm...

Love that carbine man -- I'm a sucker for Berettas. I kept walking through the Beretta booth at Shot Show to just keep messing with it. Love the fact that they take PX4 mags too

Share this post


Link to post
Share on other sites

It has the sierra papa trigger I still want to adjust it but not sure how...   also has sierra metal hammer  and sierra guide rods.. :)

 Then you didn't have the pleasure of the plastic garbage hammer and crappy trigger. Google sierra papa trigger and you will find the instructions on their site.

If not, contact them. They will help you out

Share this post


Link to post
Share on other sites

Very nice setup. That's exactly what I want. Now that I have an M9 I want a Cx4 Storm for the mag compatibility. And to sell my piece of shit Hi-point 995 thing.

Share this post


Link to post
Share on other sites

My CX4 in .40 cal is my Knockdown Steel gun of choice, next to my Saiga-12. It is stock, except for the red dot. It is an ugly gun, but works perfect! Probably put 5K round through it. Gotta clean it again one day, been about 3K round since it's last cleaning.  :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By lostcyborg
      Both of these handguns have literally zero rounds through them. I wish i was lying, these were both random purchases in the past not thinking of use or need. Both come in their respected boxes with everything that came with them. The Canik does come with a tlr-3 just because it fits well and i have a tlr-1 hl on my glock and my walther pdp pro. 
      First pistol is a Armscor M1911 A2 45 ACP. Comes with one magazine.(10rd) $380.00
      Second is a Canik TP9SF Elite 9mm Comes with Two Magazines(10rd) $370.00
      Cash/Paypal Sorry no trades. All transfers made via NJ FFL. All local laws apply. Buyer pays transfer fees at FFL. My FFL Is Louie GS In Secaucus(I live in bergen co)
      Prices are final and non negotiable. 
      First Come first serve(I’ll take it) will update as needed. 
       










    • By medic2264
      WTS USED GEN 5 GLOCK OVERWATCH PRECISION TAC TRIGGER
      $125 Overwatch precision tac trigger gen5
      $20 Hyve technologies extended magazine release gen 4/5
      I'm in Monmouth County
      The first "I'll take it" followed by a PM
      PM me for questions.
       


    • By Dooly
      17 boxes of Federal 124 grain FMJ.  (9x19mm Parabellum - 9mm Luger)
      $220 local pickup only in northern Bergen County.  Easiest place to meet would be in Paramus or north on rte. 17.  Surrounding burbs near there should be ok as well if agreed.   
      Must have matching ID and FID.  I am in Bergen County.  First to post "I'll take it" wins the sale. 

  • Posts

×
×
  • Create New...