Jump to content
Mach16lt

1911 Grip Bushing Problem

Recommended Posts

So... I guess I done messed things up pretty good...

 

Here is what has happened with my 1911. Any advice would be greatly appreciated.

 

I purchased a Wilson Combat "slip on" magwell for my Kimber TLE custom II. The following occured while I was re-installing the grips.

  • It looks as though one of the bushings cross-threaded and would no longer accept the screw properly
  • When i tried to remove the screw, the bushing came out with it
  • While attempting to remove the bushing from the screw with needle nose pliers, I royally messed up the bushing

So now I have no bushing in the top right side of my gun, and thus no screw.

 

What do I do? Does a gun-smith need to install a new bushing?

 

Does anyone have a recommended gunsmith in the central NJ area I can bring this to?

 

Thanks.

Share this post


Link to post
Share on other sites

Buy a new bushing..Not sure if it is a press fit or screw in... midway and brownells sells bushings for 1911.

 

http://www.brownells.com/search/index.htm?k=1911+grip+bushing&ksubmit=y

 

http://www.midwayusa.com/find?userSearchQuery=1911+grip+bushing

Share this post


Link to post
Share on other sites

Mach16 --  You trying to shoot tomorrow?  OBRPC steel?  I'll bring a grip screw bushing if your in need -- 

 

As for fixing your gun --  I'm in Middlesex, go to Dunellen everyday -- I'm pretty sure I've got a few grip screw bushings to get you by till you can order replacements.

 

Let me know,  we can meet at my shop in Dunellen and get it fixed up --  Worst case is you need to order bushings and screws. 

 

I've never seen a press on bushing, but that doesn't mean they don't exists -- I'd have to take Tony's word for it and I believe he knows what he's looking at

 

Send me a PM with a phone # if you need help,  Jer

 

 

Tony posted a pic as I was typing...  looks like a threaded bushing that's been tacked

Share this post


Link to post
Share on other sites

I have some extra grip bushings from my Colt as well.  I stripped up one and bought a 4 pack.  

Threading it in was fairly easy. Threw some loctite on it and took it slow.  I'll be off Monday and Tuesday, let me know if you need one. 

Share this post


Link to post
Share on other sites

First off... wow... Thanks everyone for the help! I'm so glad I found NJGF last year, you guys all rock.

 

As for answering some questions...

 

I looked at the other bushings... I really cant tell if they're staked, but the empty hole and bushing I messed up are threaded. And I'm definitely sure that they're not welded.

 

Mach16 --  You trying to shoot tomorrow?  OBRPC steel?  I'll bring a grip screw bushing if your in need -- 

 

As for fixing your gun --  I'm in Middlesex, go to Dunellen everyday -- I'm pretty sure I've got a few grip screw bushings to get you by till you can order replacements.

 

Let me know,  we can meet at my shop in Dunellen and get it fixed up --  Worst case is you need to order bushings and screws. 

 

I've never seen a press on bushing, but that doesn't mean they don't exists -- I'd have to take Tony's word for it and I believe he knows what he's looking at

 

Send me a PM with a phone # if you need help,  Jer

 

 

Tony posted a pic as I was typing...  looks like a threaded bushing that's been tacked

 

I'm getting ready to head down to OBRPC now. I'll shoot you my contact info.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By lostcyborg
      Both of these handguns have literally zero rounds through them. I wish i was lying, these were both random purchases in the past not thinking of use or need. Both come in their respected boxes with everything that came with them. The Canik does come with a tlr-3 just because it fits well and i have a tlr-1 hl on my glock and my walther pdp pro. 
      First pistol is a Armscor M1911 A2 45 ACP. Comes with one magazine.(10rd) $380.00
      Second is a Canik TP9SF Elite 9mm Comes with Two Magazines(10rd) $370.00
      Cash/Paypal Sorry no trades. All transfers made via NJ FFL. All local laws apply. Buyer pays transfer fees at FFL. My FFL Is Louie GS In Secaucus(I live in bergen co)
      Prices are final and non negotiable. 
      First Come first serve(I’ll take it) will update as needed. 
       










    • By CNJ
      Hello,
      I am new here and looking to sell my two hand guns (I have another post for a Glock G19 GEN5 that will have a description very similar to this post).

      This post is for a Browning 22 1911 Black Label with fiber optic sights that I purchased new from Firearms Support and Storage June of 2019. I have used it a total of two times at RTSP in Union NJ and in it's lifetime it has shot only 390 rounds down range.
      It comes with 2 10 round clips magazines - I have not used it since prior to covid, so I will give it the best cleaning I can before the sale.
       
      The price is $400 plus FFL transfer fees.
      If you have questions or if I can share any other photos, please let me know.
      The first to post "I'll take it" wins the sale
      Thank you! 




    • By remixer
      New In Box
      TRP™ Operator® Black Armory Kote™ w/ Full Length Integral Accessory Rail .45ACP
      $1550.00 Plus NJ Nics and NJ Tax

      Caliber: .45ACP
      Recoil System: 1 Piece N.M. Full Length Guide Rod
      Sights: Fully Adjustable, 3-Dot Tritium
      Weight: (with Empty Magazine) 45oz
      Height: 5.7"
      Slide: Forged Carbon Steel, Black Armory Kote™
      Barrel: 5 inch Stainless Steel Match Grade Bull
      Length: 8.6"
      Grip: Type Black G-10
      Frame: Forged Carbon Steel, Black Armory Kote™ , With Full Length Accessory Rail
      Magazines: 2 - 7 Round, Stainless Steel w/ Slam Pads
      MSRP: $1,730.00
      The TRP™ series of 1911s from Springfield Armory® are serious tools for the most serious of applications. These tactically proven pistols are intentionally designed to work under the worst conditions you’ll encounter. You’ll find all the quality, features and performance that you need in a 1911 of this class.
      TRP™ level quality starts with the forged national match frame and slide. These are precision fit and then mated with a match grade stainless steel barrel and bushing. The 20LPI checkering on the front strap, checkered mainspring housing and G10 grips will keep this gun in your hands when the sweat and adrenaline are flowing. The crisp 4.5 – 5lb trigger pull means you can more easily put shots on target when it matters most. 3-Dot tritium sights and an extended beveled magazine will remind you that the TRP™ was designed for use in high stress places – where the environment works against target acquisition, and mag swaps have to be lightning fast. The Armory Kote™ or Stainless Steel finish will protect your TRP™ so it’s ready for the next mission.
      Sometimes performance isn’t optional. When your requirements dictate that you use the best tools available, reach for the Tactical Response Pistol™.
    • By MichaelDiggs
      Can anyone recommend a forward grip/ handle for my AR? Right now I just wrap my hand around the hand guard which has I believe is an MLOK mounting. I feel as though I need something to brace and hold on to during shooting. I don’t want a full vertical grip hanging down, I think that would be too much. I’ve seen small ones for sale but figured I’d ask here first because of the experienced users here. Of course want it as light it can be. 
       
      Also my Aimpoint H-2 is finally coming this week from optics planet. Not sure how I got it so cheap. I think I was able to add two coupons somehow and got %26+ off. Paid little under $400. Didn’t need the T-2. Don’t plan on any night stuff at all. 
       
      Thanks fellas,
      Mike from Jersey
    • By remixer
      Here are some of my recent arrivals worth mentioning.
      LWRC DI 5.56 / 223
      Modular One-Piece, Free-float Rail, Rail Panels, Angled Fore-grip and Hand Stop, Cold Hammer-Forged, Spiral Fluted 16.1 Barrel, Fully Ambidextrous Mag Release, Bolt Catch, & Selector. Price Includes all NJ Compliance work.
      $1275.00

      Sig Sauer M400 Elite 5.56 / 223
      New Model for 2017, Aluminum M-Lok Hand guard, 16" 1:7 twist Barrel, Sig Enhanced Trigger,
      Price includes all NJ compliance work.
      $1100.00

      Sig Sauer p320 9mm Full-size w/Contrast Sights (15rds)
      Includes 2 Magazines , Plastic Case and Lock. Additional Magazines Available
      $535.00

      Sig Sauer p320 9mm Carry w/Contrast Sights (15rds)
      Includes 2 Magazines , Plastic Case and Lock. Additional Magazines Available
      $535.00

      Hi-Point 9TS 9mm Carbine Black
      $285.00

       
      Hi-Point 9TS 9mm Carbine Camo
      $325.00

       
  • Posts

    • Boom! Today all Newton is in the high $3.60s. All hail Bidenomics! And all that Alaska land he just took off the list of oil prospects.
    • I have a like new (only zeroed) PSA Sabre KAC M110 Clone in 7.62x51mm. This is PSA's clone version of the infamous Knights Armament M110. Very high quality, excellent 2 stage trigger, 20" chrome lined barrel, adjustable gas block, and is NJ legal with a pinned Surefire SOCOM muzzle brake.  Radian Raptor charging handle and Radian ambi safety. Upper and lower are billet receivers compatible with all KAC SR-25 and LMT MWS/MARS-H pattern receivers.  Im no where close to being a long range shooter but ive been able to get 0.7 MOA out of it with 175gr federal gold medal match ammo and Im sure the rifle is capable of much better accuracy. Asking $1650 (which is a steal for what you get) at any FFL thats a reasonable distance from Jersey City. I can also ship but that would be on your dime.  Optic/bipod etc not included but can be purchased if interested. Vortex Razor Gen-II HD 3-18x50 FFP with the new EBR-7C MRAD illuminated reticle in a 1.54 reptilia mount. Id include the optic for another $1700. Happy to answer any questions or provide more pictures. Not interested in any trades. Thank you.
    • Selling 1 sealed spam can Romanian 7.62x54r ammo containing 440 rounds. 1982 manufacture.  Steel core light ball, copper washed steel case.  Not reloadable.  Corrosive primer. The rust you see on the top is light surface rust. Can is intact.  Comes with opener. $285.00 cash.  I live in NW Burlington County, and work in Trenton.  I can meet you at a reasonable distance to make sale.   The first to reply “I’ll take it” wins the sale. 
    • Still want to put your dog in kennel? https://newjersey.news12.com/police-crews-rescue-46-dogs-from-fire-inside-pio-costa-industrial-complex-in-fairfield
×
×
  • Create New...