Redrum 0 Posted November 16, 2013 Hi All, I took my Cz 97 to the range yesterday for the first time. I ran a box of 50 pmc bronze 185 grain hollow points through it. I had 3 ejection issues, I know in the past there were issues but I read that around 2010 they fixed this issue. My Cz was manufactured this year so it should of been fine. Any ideas or inputs on this? Quote Share this post Link to post Share on other sites
DSD1026 48 Posted November 16, 2013 i had the same problem with my 75B.. i sent it back to CZ and they replaced the extractor and spring with a +5% Wolff spring.. was still happening after that, and I replaced the recoil spring with a lighter one (I was shooting lighter loads), and last time I bought it to the range, i fired 100 rounds with no issues. I am hoping that solved my problem.. depending on how light/hot of loads you are shooting, it might help yours as well. (?) Quote Share this post Link to post Share on other sites
xkon 0 Posted November 17, 2013 What exactly is the problem with ejection? Getting stuck in the slide after firing or a stove pipe? Quote Share this post Link to post Share on other sites
Redrum 0 Posted November 17, 2013 Thank You for the replies fellas. Well it's stuck in the slide after firing. Quote Share this post Link to post Share on other sites