Kingsoverqueens 10 Posted November 23, 2013 It's been in my family for probably 100 years. Marked Tower on the side, but no other discernable markings. 58" inches long, 3 bands. From what I've been able to research this may be Revolutionary War era. Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 It's been in my family for probably 100 years. Marked Tower on the side, but no other discernable markings. 58" inches long, 3 bands. From what I've been able to research this may be Revolutionary War era. Quote Share this post Link to post Share on other sites
intercooler 41 Posted November 23, 2013 yes...very possible. it is correct length for a long land version of the brown bess Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 Thanks for the quick reply. Photo's in other thread. This was a dup..waiting for it to be closed. Quote Share this post Link to post Share on other sites
Recon Racoon 49 Posted November 23, 2013 Civil War era. Thats a percussion cap nipple. Should be 54 caliber and take a minie ball. Also there should be rifling in the barrel, but I think at a pretty loose twist rate. I'd start with a Google search on Civil War Era tower rifles, it may be of British Origin and unique. Quote Share this post Link to post Share on other sites
JT Custom Guns 956 Posted November 23, 2013 Tower would make it English made. By the photos we can see that it was converted from a flint lock to percussion which was very common in /around 1820-1830's Many times the barrel will have marks, but could be on the underside and require removing the barrel from the stock to inspect. But BE CAREFUL not to crack the stock! I believe a true 'Tower" would be a military only made firearm, hence the sling mtg eye on the trigger guard. Best shot (pardon that pun) would be to Google Tower Flint lock / Muskets / ect. and do some research on the web. Quote Share this post Link to post Share on other sites
ogfarmer 138 Posted November 23, 2013 or take it to Rick in Vegas Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 Thanks again for the quick replies. I think it's older than Civil War era because all of the rifles I've seen on the net had a crown on the lock and tower with a date samped further up on the lock. Mine just says Tower with nothing else. I'm hesitant to take it apart to look for other markings, or even to try and clean it for fear I may damage it. Quote Share this post Link to post Share on other sites
GRIZ 3,369 Posted November 23, 2013 I would check to be sure its not loaded. Quote Share this post Link to post Share on other sites
ogfarmer 138 Posted November 23, 2013 remember the patina is what makes it valuable along with the age, so dont clean it Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 I would check to be sure its not loaded. My son said the same thing...something about people leaving them loaded all these years. Short of taking it apart I'm not sure how to check if it's loaded. I suppose I could bring it to the range and fire it? I don't know...for the time being I'm not touching it. lol Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 remember the patina is what makes it valuable along with the age, so dont clean it Patina? Is that what might be under all the grunge? lol Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted November 23, 2013 Thanks again for the quick replies. I think it's older than Civil War era because all of the rifles I've seen on the net had a crown on the lock and tower with a date samped further up on the lock. Mine just says Tower with nothing else. I'm hesitant to take it apart to look for other markings, or even to try and clean it for fear I may damage it. Since I'm the Black Powder Fudd around here, here's my take: Might be a Model 1839 Conversion (from Flintlock) Tower was Military, so you might want to look carefully for cartouches or date. Tower made this 3-Band Enfield design in .577 caliber (referred to as .58). Uses musket caps (copper top-hats) instead of standard #11 percussion caps. Nominal charge of 60 grains of 2Fg Black Powder behind a 555 grain .58 Minnie-Ball. Capable of going through TWO MEN and into a THIRD! (And YES, this was actually done during the Civil War). I have a lot more info about this rifle, so PM me for complete details and my phone number so we can chat. Still raking leaves today! Dave NRA Distinguished Expert in Muzzle Loading Rifle NRA CRSO REENACTOR Competitive Black Powder Shooter and Mentor Quote Share this post Link to post Share on other sites
ogfarmer 138 Posted November 23, 2013 Patina is the grundge. Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted November 23, 2013 I can teach you right over the phone how to tell if it's loaded. From the looks of it, it may be serviceable enough to fire. Friends of mine have all of the supplies you need to go BANG! Call me, but PM first for my number! Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 23, 2013 Rosie...I'm on my way out the door to a father/son football game. Pretty sure I'm going to windup injured. lol I'll reach out to soon! Thanks. Michael Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted November 23, 2013 Rosie...I'm on my way out the door to a father/son football game. Pretty sure I'm going to windup injured. lol I'll reach out to soon! Thanks. Michael PM sent with my cell number. Enjoy the father/son time and call me when you can Michael! Quote Share this post Link to post Share on other sites
JT Custom Guns 956 Posted November 23, 2013 Would like to hear all about her once it get identified. Please keep us updated........... Quote Share this post Link to post Share on other sites
GRIZ 3,369 Posted November 23, 2013 My son said the same thing...something about people leaving them loaded all these years. Short of taking it apart I'm not sure how to check if it's loaded. I suppose I could bring it to the range and fire it? I don't know...for the time being I'm not touching it. lol Flintlocks and percussion guns were often left loaded s they would be ready to fire. Get a wooden dowel long enough to put down the barrel. Mark it at the muzzle when it bottoms out in the barrel. Pull the dowel out and lay it alongside the barrel. Put the mark you made in line with the muzzle. If other end of the dowel is in line with the percussion cap nipple its unloaded. If the end of the dowel is few inches short of the nipple there's probably a bullet and powder there. If its loaded you're better off taking it to a gunsmith familiar with black powder guns to unload it for you. Don't dry fire the gun as there is a possibility of a spark and that black powder can still be potent after 100 years. Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted November 23, 2013 Flintlocks and percussion guns were often left loaded s they would be ready to fire. Get a wooden dowel long enough to put down the barrel. Mark it at the muzzle when it bottoms out in the barrel. Pull the dowel out and lay it alongside the barrel. Put the mark you made in line with the muzzle. If other end of the dowel is in line with the percussion cap nipple its unloaded. If the end of the dowel is few inches short of the nipple there's probably a bullet and powder there. If its loaded you're better off taking it to a gunsmith familiar with black powder guns to unload it for you. Don't dry fire the gun as there is a possibility of a spark and that black powder can still be potent after 100 years. Griz, As is usual you are 100% CORRECT, as that's the way it's done! Also take note that the original ramrod that comes with the piece is in the thimbles, so IF it's not rusted in-place, Mike can use the gun's ramrod with the same procedure you've outlined! Instead of the Gunsmith, he can bring it to me and I can "pull the load" for him, as I have all of the necessary tools, techniques and SAFETY knowledge required. I've been pulling patched round balls out of more barrels than I care to remember, lol, since Newbies in the sport tend to "dry-ball" (patched ball, NO powder behind it) at some point in their learning curve, lol! It would also be nice to teach Mike how to gently remove the bands so the barrel's PROOF marks can be recorded and researched from available historic materials, in an attempt to establish a provenance and determine if indeed the piece was issued to a particular Company during the War! As always, it's nice chatting with you. Dave Quote Share this post Link to post Share on other sites
MosinRob 1 Posted November 23, 2013 I have .58 round balls, conicals, and minnies. Be happy to give you some Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted November 25, 2013 Thank you Rob, that is very generous and much appreciated. I'm going to hook up with Rosie at some point in the immediate future so he can help me look over the gun and determine whether its safe to fire or not, but also to glean some information about the history. I'll let you know how it works out. Quote Share this post Link to post Share on other sites
MosinRob 1 Posted November 25, 2013 No problem. I cast them myself for my .58 so I have tons. Bring it to old bridge on Sunday. Rosey along with many others could tell you all about it. Quote Share this post Link to post Share on other sites
siderman 1,137 Posted March 4, 2014 Any updates to share on this ole gun? I dont visit this subforum much but I do love history! Quote Share this post Link to post Share on other sites
blksheep 466 Posted March 4, 2014 Yes updates! Quote Share this post Link to post Share on other sites
Tunaman 548 Posted March 5, 2014 Pardon my ignorance, but how WOULD one go about unloading one? Quote Share this post Link to post Share on other sites
MosinRob 1 Posted March 5, 2014 shoot it, pull it, or blow it out Quote Share this post Link to post Share on other sites
Kingsoverqueens 10 Posted March 5, 2014 Sorry Guys. Winter got in the way of me getting together with Rosie. You'd think that would't be the case, but I've done nothing with the gun yet. I appreciate everyone's interest and input. I'll update once the weather breaks and I can get outside with Rosie to learn more about the gun. Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted March 5, 2014 ^^^I'm here, lol, so anytime you can pull yourself to the range, just let me know! Quote Share this post Link to post Share on other sites