I am looking to gauge the intrest in holding an " Introduction to Smallbore F Class " Clinic in 2020. The Clinic would be held in either Pa or NJ and would cover the following material:
What is Smallbore F Class Rifle
Basic Wind Reading
Course of Fire
The Clinic would be taught by experienced SB F Class Competitors
These will be in NJ Stores soon.
100% MADE IN AMERICA. All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green. MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting. Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel. Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine.
To promote proper firearm use and gun safety, we have our Youth Firearms Academies. These week long tactical training and safety class seek to teach your child practices for safe firearms handling, operation, and marksmanship.
These courses are available to teens aged 13-17. With a wide array of available firearms, your teen will learn the best practices for handguns, rifles, shotguns, and even muzzle loaded firearms.
All academy classes run Monday through Friday, from 8:00 am to 12:00 pm.
Basic Academy Dates:
Advanced Academy Dates:
Learn More and Register Today
A fellow forum was asking about a display case for his wife’s pistol I believe. So I decided after seeing some display cases for insane prices, to make my own out of more or less cheap prices.
This one will be for my Nighthawk Custom Falcon 1911.
I started out with a humidor I had when I was on a cigar kick with the club.
Humidors make perfect cases for your gun.
Why? Its designed to keep moisture in so your cigars don’t dry out. Ones that are well made have a nice tight seal.
‘But John, we don’t want to keep moisture in. It will hurt the gun’. Correctomundo! But using it to keep moisture out works too! If you are not a cigar smoker, a humidor keeps the cigars from drying out by putting a moisture pad inside. We simply won’t be using the moisture pad nor the cheapo humidity gauge they usually give you.
So lets start. One used but still in great shape humidor with glass lid. If you don’t have one, you can pick up something decent for about $50. I added a lik leather NH tag to use to open lid. They are air tight and easier to open with something to grab.
If you use a humidor, they sometimes come with a lil shelf and divider. Toss them.
Next, we added a little antique bronze clasp. 5 for $12 on Amazon. They come with tiny wood screws. You’ll need a jeweler type phillips head and a small awl to start a hole. Do not screw in without a starter hole. Also a mini pad lock with skeleton key.
Next, you’ll want something to lay in there like velvet. I chose purple velvet. Rather than buy it by the yard, I actually got 2 - 14”x14” pillow shams with zippers on Amazon for about $11...
This is a lot cheaper than buying it by the yard plus you don’t gave to sew anything. Just stuff it and zip it.
You will need something to stuff it. That is your choice. I already had a bag of poly fill from another project. You can even rio open al old pillow and use the guts.
Next is rechargeable Silica packs. I got a 25 count bag cheap also on Amazon. I chose to line the bottom of the case and also throw some inside the sham.
Once you beat it and adjust it to get in the right position, you can see how the gun sits and adjust as needed.
Next is optional and not cheap. I picked up 2 - Sensor Push bluetooth temp/humidity sensors for $50 each. One for the box and one for my safe. After calibrating them and pairing them to my phone, I inserted one into the display case.
You don’t have to do this but I’m a bit of a tech nerd so.... [emoji6]
You can also use a cheap digital one too.
This one transmits data and stores 20 points which you can set alarms in the app if moisture increases. Kind of more important in my safe but....[emoji16]
Here is a sample of the data. I just put them in so it will take time to level off.
That’s pretty much it. Outside of the sensors, its cheap, easy and looks great. You can fo crazy with it or go simple.
Sent from my iPhone using Tapatalk
So if it is Russian and not a Saiga or VEPR it is most likely a parts kit built on a US receiver. Are you sure the receiver says AKM? I am not a lawyer and some will say its OK while other's will say it's not. You have to decide what you are comfortable with because to me in NJ...AK variants are a roll of the dice. You could argue the whole substantially identical verbiage and what "type" means but the statute clearly says: "Avtomat Kalashnikov type semi-automatic firearms" are banned. Good luck! I love my AK-103 clone.
If its not a news worthy attention grabbing topic. Youll hear crickets. All i can say is call his office. And wait. I had an issue where i applied for my nh permit. Most people get it in 2 weeks. 2 mos later nothing. They gave me a run around. I figured hes bar sanctioned in nh. Called time after time. No response. Youll see. Unless hes broke and needs money hell respond.