Targetpractice 3 Posted February 9, 2014 Just ran the first 200 rounds through my new para. Needs a good cleaning. I have both mpro 7 and froglube. which would you choose Quote Share this post Link to post Share on other sites
DL75 0 Posted February 9, 2014 FrogLube. This stuff is awesome!!! Worth every penny. Quote Share this post Link to post Share on other sites
Targetpractice 3 Posted February 9, 2014 FrogLube. This stuff is awesome!!! Worth every penny. i do like froglube a lot too. the issue with it is the application process is a pita. M pro is also amazing. m pro is more of the traditional cleaning method. In my opinion the froglube and mpro7 are the two best cleaning kits on the market Quote Share this post Link to post Share on other sites
HBecwithFn7 296 Posted February 9, 2014 Just ran the first 200 rounds through my new para. Needs a good cleaning. I have both mpro 7 and froglube. which would you choose +1 for Frog Lube. Quote Share this post Link to post Share on other sites
checko 180 Posted February 9, 2014 Never used frig lube. I know my mpro7 has been gtg Quote Share this post Link to post Share on other sites
dwamp2006 1 Posted February 9, 2014 I'd go with frog lube. Yea its a PIA the first time but you dont have to reapply for a veryyyy long time. Just wipe it down and run some patches through and your GTG! Quote Share this post Link to post Share on other sites
illy 1 Posted February 9, 2014 Another vote for the green stuff. It's all I use now. Quote Share this post Link to post Share on other sites
302w 83 Posted February 9, 2014 I like oldschool CLP. It smells like bananas. Quote Share this post Link to post Share on other sites
BullzeyeNJ 104 Posted February 9, 2014 I recommend Fireclean. If you like Froglube then you will love Fireclean. Similar products but Fireclean is much easier to apply and is odorless. No Ben gay smell like Froglube. Quote Share this post Link to post Share on other sites
vladtepes 1,060 Posted February 9, 2014 im using the mpro and am satisfied with it... Quote Share this post Link to post Share on other sites
HBecwithFn7 296 Posted February 9, 2014 I recommend Fireclean. If you like Froglube then you will love Fireclean. Similar products but Fireclean is much easier to apply and is odorless. No Ben gay smell like Froglube. Don't think of Frog Lube as "Ben Gay" - Think of it as "Wintergreen." :D Quote Share this post Link to post Share on other sites
usnmars 136 Posted February 9, 2014 M pro. I have never found a need to lubricate my frog, nor use a lubricant made from frogs. Quote Share this post Link to post Share on other sites
tj462nj 32 Posted February 9, 2014 I've always had good luck with Pro 7 Quote Share this post Link to post Share on other sites
pTr939 0 Posted February 9, 2014 Never had problems using M Pro 7, Militec, or Breakfree CLP. Was curious about Frog Lube but I don't want to waste the money I spent on the previous lubes..maybe I'll look into those when my current supply run out. Same with FireClean. This vid might be able to help you decide Quote Share this post Link to post Share on other sites
Clintoon Eastwood 2 Posted February 9, 2014 Frog Quote Share this post Link to post Share on other sites
Targetpractice 3 Posted February 9, 2014 Never had problems using M Pro 7, Militec, or Breakfree CLP. Was curious about Frog Lube but I don't want to waste the money I spent on the previous lubes..maybe I'll look into those when my current supply run out. Same with FireClean. This vid might be able to help you decide I never go by those videos. there is tons of them on youtube. they all have different results. It doesnt test the oil how it's used on a gun. I dont leave my guns outside in the elements and i dont spray salt or fresh water on them either. all those videos show is corrosion resistance if you forgot your gun outside for 2 months. Im more interested in whats gonna protect my finish in a high friction and heat environment. Those tests dont show which cleaners work better or what lubrication handles wear better. I used mpro on my gun last night. Reason being? I was a little nervous that it would be tough to get the froglube paste out of the 25LPI gripping Quote Share this post Link to post Share on other sites
Targetpractice 3 Posted February 10, 2014 never heard of fireclean until this post. i may eventually check it out but until then i have froglube and mpro7 Quote Share this post Link to post Share on other sites
A-Tech 8 Posted February 10, 2014 It does it all. It's a CLP, and with very minimum amounts of application. I literally clean my guns with a lint free cloth and q-tip...it's that easy. Quote Share this post Link to post Share on other sites
T Bill 649 Posted February 10, 2014 Moved my "dirty" guns (22lr, ar's) to Fireclean and what a difference. Cleanup is a lot easier, especially those nasty 22LR pistols. Even treated the bore on the 22LR and de-leading the bore is a lot easier. Quote Share this post Link to post Share on other sites
raz-0 1,256 Posted February 12, 2014 I never go by those videos. there is tons of them on youtube. they all have different results. It doesnt test the oil how it's used on a gun. I dont leave my guns outside in the elements and i dont spray salt or fresh water on them either. all those videos show is corrosion resistance if you forgot your gun outside for 2 months. Im more interested in whats gonna protect my finish in a high friction and heat environment. Those tests dont show which cleaners work better or what lubrication handles wear better. I used mpro on my gun last night. Reason being? I was a little nervous that it would be tough to get the froglube paste out of the 25LPI gripping Do you use your gun when you sweat? I do. My results with the stuff I have used that the video has is in line with their results. In my experience, CLP outperforms frog lube in corrosion resistance by a bit and neither are super awesome. IMO frog lube is NOT worth the price. I was jazzed for a non stinky wax/grease, and it doesn't cut it compared to most every other grease I have used in terms of staying where you put it. The liquid is on par with CLP at a higher price, but it smells not too awful, which might justify it for you. Currently, I use FP-10. a teeny bit more than CLP, it has a kind of cinnamon like scent to it. A coating lasts longer, but corrosion protection is about the same. I really don't rely on anything to CLP. THE C part gets done by a separate product, I just want a good all around LP. They all seem to be not that far apart unless you start going with a separate lube and protectant. Unfortunately simultaneous use of most L and P standalone products is contraindicated. There are three I actively avoid. 1) Wilson grease. It's not a grease IMO, and does not stay in place well as well as not cleaning or protecting. kind of a waste of money. 2) Boeshield. t-9. I've only ever found the spray. It's a decent protectant, but aa crap lube. It dries to a weird coating. On polished surfaces, not so bad, on matte surfaces it seems to stay sticky and pick up dust and lint. The real killer is that it penetrates, and I have had it cause unsafe conditions on multiple 1911 pattern guns by negatively interfering with the fire control parts. 3) militec-1. The stuff seemed to actively promote corrosion. Total crap as a lube. I got mine as a free sample in a grab bag and was pissed with the results. Quote Share this post Link to post Share on other sites
Targetpractice 3 Posted February 13, 2014 Do you use your gun when you sweat? I do. My results with the stuff I have used that the video has is in line with their results. In my experience, CLP outperforms frog lube in corrosion resistance by a bit and neither are super awesome. IMO frog lube is NOT worth the price. I was jazzed for a non stinky wax/grease, and it doesn't cut it compared to most every other grease I have used in terms of staying where you put it. The liquid is on par with CLP at a higher price, but it smells not too awful, which might justify it for you. Currently, I use FP-10. a teeny bit more than CLP, it has a kind of cinnamon like scent to it. A coating lasts longer, but corrosion protection is about the same. I really don't rely on anything to CLP. THE C part gets done by a separate product, I just want a good all around LP. They all seem to be not that far apart unless you start going with a separate lube and protectant. Unfortunately simultaneous use of most L and P standalone products is contraindicated. There are three I actively avoid. 1) Wilson grease. It's not a grease IMO, and does not stay in place well as well as not cleaning or protecting. kind of a waste of money. 2) Boeshield. t-9. I've only ever found the spray. It's a decent protectant, but aa crap lube. It dries to a weird coating. On polished surfaces, not so bad, on matte surfaces it seems to stay sticky and pick up dust and lint. The real killer is that it penetrates, and I have had it cause unsafe conditions on multiple 1911 pattern guns by negatively interfering with the fire control parts. 3) militec-1. The stuff seemed to actively promote corrosion. Total crap as a lube. I got mine as a free sample in a grab bag and was pissed with the results. i do use my guns when i sweat on a hot summer day. that is still far from the corrosion tests. I clean my guns after the range. I dont leave them out in the elements for 2 months. Quote Share this post Link to post Share on other sites
Blacksmythe 71 Posted February 13, 2014 Hopes 9 and rem oil Quote Share this post Link to post Share on other sites
jeff47 30 Posted February 14, 2014 I use Hoppes and Rem Oil traditionally but use Ballistol on occasion and have tried Frog Lube which is OK. Recently I have started using Mil-Comm more frequently and have found good results with it. I figure Mil-Comm works well, its non toxic like Frog Lube and its made in East Rutherford so that works for me. Quote Share this post Link to post Share on other sites
Smoke Eater 0 Posted April 28, 2014 I prefer miltec. First i remove all the carbon build up with a brass brush and a small amount of hoppes. I then wipe my gun down with a few baby wipes, which works great. Then i use a very light coating of the miltec on the parts that need lube. I do this with my glocks, mp22, sig229, saiga 12 and 223. And for the bore i use a bore snake or a conventional brush and rod depending on the build up. Quote Share this post Link to post Share on other sites