Jump to content

Recommended Posts

So i finally got to take "Krystal", my Umbrella Corp. build to the range yesterday. Robs609 and my self helped Firearms Training Sepulveda Firearms Training film some instructional videos at Shooters last night. While Robs609 got to shoot her more than i did, i was able to pop off a few rounds and give a quick test to the Umbrella Corp BCG and SSA trigger i installed yesterday. Rob, Kharis and myself agree... the SSA Trigger is where it's at! So much smoother and tighter than the Spikes Battle Trigger i had in there before.

 

shot about 50 rounds w/no FTF or FTE with the new Umbrella BCG. More info on that after i get some more trigger time on her.

 

anyway, here are a few photos and vids from yesterday.. check out that muzzle flash! lol

 

 

154551802.jpg

154551803.jpg

 

 

 

 

154551805.jpg

154551807.jpg

 

 

 

Thanks to ROBS609 for being our designated shooter for the videos.

 

anyway, thought we would share!

Share this post


Link to post
Share on other sites

Very cool.

 

What's with the yardage markers?  The numbers get bigger in front of the shooter, smaller behind the shooter.  Makes it look like the backstop must be behind him!

Share this post


Link to post
Share on other sites

Very cool.

 

What's with the yardage markers?  The numbers get bigger in front of the shooter, smaller behind the shooter.  Makes it look like the backstop must be behind him!

 

Uh - that's at a range with target movers.  The distances are from the actual ports, not the distance from the backstop like at SCFGPA.

Share this post


Link to post
Share on other sites

So i finally got to take "Krystal", my Umbrella Corp. build to the range yesterday. Rob609 got to shoot her more than i did

Took your girl out to pop her cherry and someone else got to diddle her more than you, oh my

 

Very cool.

 

What's with the yardage markers?  The numbers get bigger in front of the shooter, smaller behind the shooter.  Makes it look like the backstop must be behind him!

They are in front of the shooting line, to avoid having the booths in the video

Share this post


Link to post
Share on other sites

Very cool.

 

What's with the yardage markers? The numbers get bigger in front of the shooter, smaller behind the shooter. Makes it look like the backstop must be behind him!

That would be the distance from the common firing line when using the overhead returning targets.

 

Sent from my SCH-I800 using Tapatalk 2

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By medic2264
      WTS USED GEN 5 GLOCK OVERWATCH PRECISION TAC TRIGGER
      $125 Overwatch precision tac trigger gen5
      $20 Hyve technologies extended magazine release gen 4/5
      I'm in Monmouth County
      The first "I'll take it" followed by a PM
      PM me for questions.
       


    • By Mr.Stu
      I was staff at the Battle For The North Coast USPSA match a couple of weeks ago. I won a certificate for a new Glock at the staff dinner. I already have several Glocks which fulfil my needs so I'm putting it up for sale.
      The certificate is good for the following guns free of charge:
      9mm: G17, G17 Gen5, G19, G19 Gen5, G26. G26 Gen5, G43, G43X MOS, G48 MOS, G45
      .40S&W: G22, G22 Gen5, G23, G23 Gen5, G27, G27 Gen5
      .357Sig: G31, G31 Gen4, G32, G32 Gen4, G33, G33 Gen4
      .380: G42
      .22LR: G44
      .45GAP: G37, G37 Gen4, G38, G39
       
      There are other models available with an upgrade fee which is taxable (just the upgrade fee, not the whole price of the gun)
      $58 Upgrade:
      10mm: G20, G20SF, G29, G29SF
      .45ACP: G21SF, G21 Gen4, G30 Gen4, G30SF, G30S, G36FGR
      $71 Upgrade fee:
      9mm: G19 Gen5 MOS, G45 MOS, G47 Gen5 MOS
      $90 Upgrade fee:
      9mm: G19X (Coyote color only)
      $92 Upgrade fee:
      9mm: G34
      .40S&W: G35
      .45ACP: G41
      $156 Upgrade fee:
      9mm: G34 Gen5 MOS
      10mm: G40 Gen4 MOS
      .45ACP: G41 Gen4 MOS
      The actual list of guns is here: https://photos.app.goo.gl/w3GnW1DjwepoGebH8
      You can also choose to add Glock night sights for $67 or, if ordering a Gen5 model, Ameriglo Bold sights for $90.
      The certificate is valid until 12/31/2024. You would need to fill it out and send it with a copy of your FFL's license to Glock. They would then send the gun to your FFL for transfer to you. You are responsible for all FFL fees.
      I'm looking for $475 for the certificate. As there is no actual firearm being transferred, just a certificate, there is no permit required, although you will need one if you are an NJ resident so your FFL will be able to transfer the gun to you.
      The first to post "I'll take it" wins the sale.
    • By 8lbsledge
      please delete
       
    • By CNJ
      Hello,
      I am new here and looking to sell my two hand guns (I have another post for a Browning 22 1911 what will have a description very similar to this post).

      This post is for a Glock G19 GEN5 with night sights that I purchased new from Firearms Support and Storage June of 2019. I have used it a total of two times at RTSP in Union NJ and in it's lifetime it has shot only 172 rounds down range.
      It comes with 3 10 round magazines as well as the grips/lock as shown in the photos. I have not used it since prior to covid, so I will give it the best cleaning I can before the sale.
      The price is $325 plus FFL transfer fees.
      If you have questions or if I can share any other photos, please let me know.
       
      Thank you! 
       
      The first to post "I'll take it" wins the sale
       





  • Posts

×
×
  • Create New...