Jump to content

Recommended Posts

Over the last few weeks, I have decided that I would like to assemble my first AR 15 instead of purchasing one off the shelf. I have done a plethora of research, (Although, I am sure that there is a lot more that I can obtain), and have come to the conclusion that to get what I want in a rifle, assembling one would be the smarter choice. It would also give me the knowledge of how to put one together, learn as to what each part does, and just know that rifle inside and out.

 

Mind you, I will be building the rifle at my dad`s who live in IL, so I won`t have to deal with NJ`s restrictive laws. I do visit him on a monthly basis, so it will be used, shot, and cared for.

 

Please comment, as I am always interested as to what other have to say or any criticisms that you may have.

 

So, here is the parts list that I have come up with that will fit my needs. Again, feel free to offer suggestions.

 

Barreled upper receiver with free float rail - PSA 16" M4 Premium ss12G2 Chambered in 5.56

PSA AR15/M16 Charging handle

Spikes Tactical Complete 5.56/.223 BCG

PSA Gadsden Stripped Lower Receiver

PSA AR Lower parts kit w/ MAGPUL grip and trigger guard

Spikes Tactical 6-postion Mil. Spec buffer tube kit

Magpul CTR Carbine Mil. Spec Stock

Daniel Defense flip up front and rear sights

Vortex Strikefire II Red dot sight

 

I`ll probably get about 3 or 4 mag`s and an angled fore grip.

Share this post


Link to post
Share on other sites

I've got the same upper.  I'm pretty happy with it.  The function has been flawless and the SS12G2 is extremely light, although not the easiest to mount picatinny accessories to.  The only change I made to the upper was a swap to a BCM charging handle, really just because I like the look better.  

 

I went with a Vortex Sparc.  Now I haven't been able to shoot it past 50yds, but off a bench with the RDS I can get a pretty tight group, standing off hand rapid fire I can move around the corners or a target paper with ease.  I was looking to keep my first AR somewhat budget and it worked out great, although it started a little bit of an addiction. 

Share this post


Link to post
Share on other sites

I'm a little jealous. I want to start a build but have a few more things I want to get beforehand and learn about too. I've been doing some research here and there...it hurts my head how many different versions of even a bolt release there are out there :banghead:. And with the number of manufacturers I find it hard to know which are great/good/bad/bomb-in-your-hand quality but it is kind of fun thinking of all the possibilities!!!  :icon_e_geek:  :icon_e_biggrin:  :yahoo:

 

Good luck with the build. 

 

 

KCCO

Share this post


Link to post
Share on other sites

I'm a little jealous. I want to start a build but have a few more things I want to get beforehand and learn about too. I've been doing some research here and there...it hurts my head how many different versions of even a bolt release there are out there :banghead:. And with the number of manufacturers I find it hard to know which are great/good/bad/bomb-in-your-hand quality but it is kind of fun thinking of all the possibilities!!!  :icon_e_geek:  :icon_e_biggrin:  :yahoo:

 

Good luck with the build. 

 

 

KCCO

 

 

I have been the same say as well. Even though I have all the parts I need and want, I am still looking at other possibilities.

 

 

If he's building it in IL it's fine the way it is, AFAIK they don't have an AWB.

 

From I`ve been reading and seeing around there, (Illinois), there is not one. I even had someone at Gander Mountain tell me that they can order me a drum if I so desired. I even asked him if that`s illegal, having been from Jersey and all, and he said nope. I was floored to say the least.

Share this post


Link to post
Share on other sites

If there is only one piece of advice I can give you, it's this.  Build your rifle around the barrel.  First figure out what kind of rifle you want, more to the point, what is the rifles purpose in life.  Is it home defense, competition, hunting, just a few fun weekends each year at the range breaking shit or some other purpose? 

 

A short light barrel (14.5" with muzzle device to bring it to 16+ inches) will get you out of most bad situations in tight spaces.  A heavier 16" barrel will do the same as the aforementioned with more endurance.  If you want better accuracy look into Wylde chambered barrels, If you want to shoot longer ranges without having a big long honking barrel an 18" heavy bbl can help you reach out and touch something.  If you tend to neglect your firearms get a stainless steel bbl.  If you want to shoot rodents at 400 yards a 20" or longer heavy or bull bbl is the ticket.  If you are going to overspend on anything, it should be the barrel.  The best trigger, laser, scope or stock wont help much if the barrel is shit.

 

EDIT: Also, twist rate is important.  If you will be shooting cheap 55gr or 62gr milsurp range fodder then a 1:9 will be fine.  If you plan on shooting longer ranges with heavier bullets (67gr or heavier) then a 1:8 or 1:7 should be considered.

 

In many regards, rifles are like golf clubs.  Sure you can play the entire course with a sand wedge, but having the right club (rifle) for a particular shot will make the game a lot easier.  In any case, the bbl is the club head and the rest is just a matter of accessories.

Share this post


Link to post
Share on other sites

If there is only one piece of advice I can give you, it's this. Build your rifle around the barrel. First figure out what kind of rifle you want, more to the point, what is the rifles purpose in life. Is it home defense, competition, hunting, just a few fun weekends each year at the range breaking shit or some other purpose?

 

A short light barrel (14.5" with muzzle device to bring it to 16+ inches) will get you out of most bad situations in tight spaces. A heavier 16" barrel will do the same as the aforementioned with more endurance. If you want better accuracy look into Wylde chambered barrels, If you want to shoot longer ranges without having a big long honking barrel an 18" heavy bbl can help you reach out and touch something. If you tend to neglect your firearms get a stainless steel bbl. If you want to shoot rodents at 400 yards a 20" or longer heavy or bull bbl is the ticket. If you are going to overspend on anything, it should be the barrel. The best trigger, laser, scope or stock wont help much if the barrel is shit.

 

In many regards, rifles are like golf clubs. Sure you can play the entire course with a sand wedge, but having the right club (rifle) for a particular shot will make the game a lot easier. In any case, the bbl is the club head and the rest is just a matter of accessories.

I like the way you put that. Thumbs up.... :)

 

 

Sent from my iPad 2 using T2 Pro

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By salvatorejrc
      I just got my FID for long guns, although I don't know anything about guns or ammo. What is a good gun to get my hands on that will help me learn more but won't break the bank, at the same time being ideal at home defense?
    • By Smokin .50
      CNJFO HOG HUNT SUNDAY JAN. 26TH! SAVE THE DATE!
      A PORKTASTIC GOOD TIME W/ 2A PATRIOTS & FRIENDS!
      by Black Wire Media Wed. Nov. 13, 2019 www.cnjfo.com/join-us
      The Coalition of New Jersey Firearm Owners is proud to announce we've scheduled our first Hog Hunt of the new season for Sunday January 26th. So mark your calendars and watch for our event page & sign-up on our website (coming SOON!). The guided Hunt is ideal for beginners & anyone looking for a challenge since this is a "NO license, ANY weapon" affair held on a 150 acre island in the middle of the Susquehanna River near Harrisburg, PA. Raffles, swag, lunch included. Stay Saturday night & party with us (Dutch Treat) OR come Sunday. A great way to fill the freezer & support NJ's busiest 2A group!
      Hunt includes hot lunch served on the island, field dressed hog, goody bag w/ swag items, raffles for great prizes (BRING CASH ON ISLAND) & all the memories you can take home!
      We recommend V. Roche & Son Butchers in Whitehouse Station, NJ.  A CNJFO sponsor, they have a renowned reputation for excellent service!
      Register HERE:  
      https://www.cnjfo.com/event-3629844


       
    • By fslater
      Hi, and thanks in advance for any help.
      I'm starting to gather parts for a build. I want to do an AR15 with a 20" wylde barrel and a 1:8 twist. The reason for the 20" is, many years ago (may be a factor) in the army with an m16a1, I was hitting pop up silhouettes at 400 yds. Going to the range now with a 16" barrel/magpul pro sights and  I can just hit paper at 150 yds. I like the look of a collapsible stock and also the fact that the pin can be drilled out should I move out of our peoples republic state. Now to the question.
      While unsuccessfully looking for a rifle length extension tube that will accept a carbine adjustable stock, I ran across a few threads on other forums that addressed the issue by saying: use a carbine tube setup with an H buffer. My question is.... will this setup reliably cycle and not beat up the moving internals? And two, what would be the best buffer for  20" barrel with a rifle length gas system, H1, H2, H3? And last but not least will the standard carbine buffer spring work or is a heavy carbine spring needed with the heavy buffer?
      Thanks again for your advise and wisdom.
  • Posts

×
×
  • Create New...