BlueLineFish 615 Posted August 2, 2014 Well I recently acquired a new 10ga. Wanted a mercury magnum and found one at a really good price. I know some of the older spanish shotguns had issues with barrels so looking for some insight. The previous owner said he shot modern 10ga loads with no issues. I am not sure if its damascus barrels. It says special grade steel on the barrels. Its an eibar built mercury magnum with 30" barrels. Its a tank. I chokes are both fixed full. I also noticed that inside the barrel it appears to be stepped down. If I had a smith remove the step would that help prolong the life. Obviously I dont plan on putting a ton of shells through this but I would like to just use the steel 10ga I have rather than only expensive lead shot. Any input is appreciated Quote Share this post Link to post Share on other sites
W2MC 1,699 Posted August 2, 2014 A 10 gauge double....did it come with a gun-boy to carry it around? Anyhow, I know a few guys who hunt with 10 gauge doubles for deer - they're slinging buckshot, and you can tell when they fire...its bang, bang (the 12's) and BaBOOM! (the 10). Damascus barrels are obvious from the pattern made from its original construction...damascus barrels are made by winding strips of steel around a barrel mandrel, then hammered together into the barrel shape. The strips form a continuous pattern in the metal around the barrel. "Fluid" steel (a single continuous forging) is what we use today. Damascus is UNSAFE to shoot with modern pressures, and questionable even with black powder pressures. Rust and corrosion getting in-between those strips of metal is the primary concern...you cannot see the damage before the barrel lets go. Whats kind of funny is that the fluid steel was considered the cheaper material back in the day, and the high-brow shotguns were damascus. Dont know what you mean by a step in the barrel. hope that helps.... Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 2, 2014 Here are some pics. Barrels dont appear to be damascus. So steel should be ok. Quote Share this post Link to post Share on other sites
tt-33 8 Posted August 2, 2014 you can look up the proof marks on line and find the year it was made and if its proofed for modern loads Quote Share this post Link to post Share on other sites
Parker 213 Posted August 2, 2014 The "step" you see is the end of the chamber mouth before the forcing cone. From beech face to chamber step should be 3 1/2" as specified on the barrel. You want this intact unless you have plans for lengthening the forcing cone. The proof marks should confirm it's proofed for modern loads. The 3 1/2" chamber length stamped on the barrel is one indicator, since the 10 ga. began life at the pipsqueak length of 2 7/8". Your Eibar has a Greener crossbolt in addition to the underlug locks. It's a very strong lockup. Quote Share this post Link to post Share on other sites
GRIZ 3,369 Posted August 2, 2014 Many pre-steel shot shotguns can be damaged by steel shot. Do you mean stepped down at the muzzle or stepped down at the chamber end? If at the muzzle that's most likely the choke. You might want to leave that alone. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 2, 2014 Stepped down at the chamber end. Its chambered for 3 1/2 shells and not the lite 2 7/8. Quote Share this post Link to post Share on other sites
Old School 611 Posted August 2, 2014 Stepped down at the chamber end. Its chambered for 3 1/2 shells and not the lite 2 7/8. I was going to post a snyde comment about the "steps" in the barrel but decided to be constructive instead If you have a gunsmith lengthen the forcing cones you can greatly reduce recoil. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 2, 2014 I am not so much worried about recoil as I am about ammo choice to no do damage. Barrels appear to have pretty thick walls. Might just shoot reduced power loads. I have heard black powder loads are fun in these guns too but for that I would have to reload them. Quote Share this post Link to post Share on other sites
JC_68Westy 1,024 Posted August 2, 2014 I would be hesitant to shoot 10ga steel through an older full choked gun. With older barrels modified choke is normally considered the tightest you should go with steel loads. Quote Share this post Link to post Share on other sites
Old School 611 Posted August 2, 2014 I am not so much worried about recoil as I am about ammo choice to no do damage. Barrels appear to have pretty thick walls. Might just shoot reduced power loads. I have heard black powder loads are fun in these guns too but for that I would have to reload them. It appears to be an inexpensive double sold in the 60's-70's. Should have no problem shooting modern ammo but, NO STEEL! Quote Share this post Link to post Share on other sites
DaddyNick 408 Posted August 3, 2014 Have someone roll some 3 1/2" #1 Buckshot for ya and you'll have a deer killin' machine. as already said I would not shoot steel in it. Nick Quote Share this post Link to post Share on other sites
mipafox 438 Posted August 3, 2014 You couldn't find anything bigger? That's pretty cool. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 3, 2014 Ok..no steel it is. Looks like another expensive mouth to feed Quote Share this post Link to post Share on other sites
W2MC 1,699 Posted August 3, 2014 I would be hesitant to shoot 10ga steel through an older full choked gun. With older barrels modified choke is normally considered the tightest you should go with steel loads. I concur - the gun is not meant for steel - you have to remember that steel does NOT want to give or deform as it passes thru the choke like lead will, and the rule of thumb is one choke more open with steel - meaning that a lead 'modified' choke performs like a 'full' with steel. This one would be like a super full - at least until the steel shot pushes out the choke, and your shotgun becomes more of a blunderbuss. What you do have is a serious deer hunting gun; perfect for launching buckshot loads. Gunbot tracks 10 gauge shell availability. http://www.gunbot.net/ammo/shotgun/ Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 3, 2014 So options for shot would be tungsten, lead and what else? Quote Share this post Link to post Share on other sites
GRIZ 3,369 Posted August 3, 2014 So options for shot would be tungsten, lead and what else? I would say lead only. Quote Share this post Link to post Share on other sites
Old School 611 Posted August 3, 2014 I would say lead only. Absolutely! Quote Share this post Link to post Share on other sites
Parker 213 Posted August 3, 2014 If you can find them, bismuth shotshells would be another non-toxic alternative to lead in those fixed choke barrels if used for waterfowl. If you reload, some reloading suppliers still sell bismuth in bulk. (Precision Reloading is one.) Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted August 3, 2014 I'd LOVE to "take a ride" on that thing Joe! My 10 ga. muzzleloader SxS is my favorite bird gun! Good luck with it! Dave Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 3, 2014 If i ever get out to shoot you are more than welcome to try it. Gotta load up on lead shells first. Quote Share this post Link to post Share on other sites
W2MC 1,699 Posted August 3, 2014 Ammo - Cabela's has some: http://www.cabelas.com/catalog/browse/shotgun-ammunition/_/N-1100191+4294751398/Ne-939/Ns-CATEGORY_SEQ_104567580?WTz_l=SBC%3BMMcat104792580%3Bcat104691780&WTz_srn=By+Shot+Size&WTz_st=GuidedNav&WTz_stype=GNU 10 gauge buckshot - 18 pellet 00 Buck! http://www.ammunitiontogo.com/product_info.php/pName/5rds-10-gauge-federal-vitalshok-3-12-mag-18-pellet-00-buckshot-ammo/cName/10-gauge-all-10-gauge 10 gauge slugs - 1.75 oz! https://www.iammo.com/Ammunition/Shotgun-Ammo/54322-F103FRS_Federal-Standard-Power-Shok-Rifled-Slug-10-Gauge-3.5-1.75-Ounce-Slug-Shot-5-Round-Box-F103FRS- Quote Share this post Link to post Share on other sites
Oakridgefirearms 224 Posted August 3, 2014 I can get some 10 gauge 3.5", even if it's only a box or two, however the only non steel loads I'm seeing are turkey loads. I'm putting in an order tomorrow and can tack it on if you're interested. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 3, 2014 Would copper plated lead be ok. Just as an added option Quote Share this post Link to post Share on other sites
W2MC 1,699 Posted August 3, 2014 I can get some 10 gauge 3.5", even if it's only a box or two, however the only non steel loads I'm seeing are turkey loads. I'm putting in an order tomorrow and can tack it on if you're interested. Diverging from the "norm" seems to be the problem right now. Looking at the Cabela's site, and counting the different shell availability: .410 19 28 gauge 12 20 gauge 78 16 gauge 14 12 gauge 143 10 gauge 12 Quote Share this post Link to post Share on other sites
W2MC 1,699 Posted August 3, 2014 Would copper plated lead be ok. Just as an added option Yes. Copper plating helps prevent the deformation when going thru the choke, but doesn't beat-up the barrel. Quote Share this post Link to post Share on other sites
Mikeythumbs 1 Posted August 3, 2014 Well I recently acquired a new 10ga. Wanted a mercury magnum and found one at a really good price. I know some of the older spanish shotguns had issues with barrels so looking for some insight. The previous owner said he shot modern 10ga loads with no issues. I am not sure if its damascus barrels. It says special grade steel on the barrels. Its an eibar built mercury magnum with 30" barrels. Its a tank. I chokes are both fixed full. I also noticed that inside the barrel it appears to be stepped down. If I had a smith remove the step would that help prolong the life. Obviously I dont plan on putting a ton of shells through this but I would like to just use the steel 10ga I have rather than only expensive lead shot. Any input is appreciated I am confused since when is steel shot cheaper than lead. When I have looked lead is always way cheaper than steel is it a 10ga thing or am I just being dense Quote Share this post Link to post Share on other sites
RecessedFilter 222 Posted August 3, 2014 Is that an Eibar, BLF? I have a SxS that looks just like that with the hand-done engraving. I love that every one of their shotguns are different in that way. It's almost like art all over the receiver, trigger housing, and barrel release. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted August 3, 2014 Yes...it is an eibar Quote Share this post Link to post Share on other sites
tt-33 8 Posted August 4, 2014 for the lite 10s rst has several listed but only non tox nice shot in stock .they are my choice for 2 1/2 12ga shells or anything uncommon Quote Share this post Link to post Share on other sites