-
Recently Browsing 0 members
No registered users viewing this page.
-
Use Promo Code "NJGF10" for 10% Off Regular Items
-
Supporting Vendors
-
-
Latest Topics
-
-
-
Similar Content
-
By MichaelDiggs
I like cleaning my AR. I can get just about place I need to. One area I'm having trouble with is one end of the bolt carrier. Not the end where you use the Otis cleaning tool, but the other side. If I look into there I see some build up carbon that I just can't get to. A wire brush won't fit and it is a tight fit. What I need is some kind of brush with the bristles on the end of the brush itself to stick down this carrier and just start twisting the brush to clean as much the carbon as it can. Is there anything like that out there at all? Preferably brass, don't want to scratch anything up. Not sure if that area was overlooked by the cleaning companies or what, but it does leave carbon build up on every range day. The picture in this post is the area I can clean with the Otis tool. It is the other side that I can't get into. Went to Lowes, Home Depot, trying to think outside the box to even make a tool. Any ideas or is anyone as OCD as this?
-
By Cereza
I'm asking this on behalf of my husband, who recently purchased his first firearm.
He cleaned it following the manual along with a YouTube video. Both said to put a single drop of oil at 7 points. He used the bottle of Hoppe's 9 Lubricating Oil that came with his kit (this one: http://www.hoppes.com/cleaning-kits/more/rifle-kit-with-aluminum-rod ) to do that. The first time, which was after he bought it home from the shop, he realized he used too-large drops and wasn't surprised when he saw some leakage. When he cleaned the firearm after his trip to the range, he focused on using smaller drops, but there was still leakage.
Both times he noticed oil on the side of the frame that faced down in the case during storage, and on the ejection port. Handling it and working the slide a few times after the second cleaning, he also noticed some oil near the takedown lever (which is on the up side during storage).
Should he be cleaning/oiling less frequently, or should he be using a different oil (or at least a different application method for the oil)? Or is this normal?
-
By oldguysrule649
Hoping to get some guidance. (Did already search the forums.). Have owned a 22LR rifle and pistol for many years. After cleaning the firearms, the inside of the barrels always looked very clean and shiny/spotless. Recently purchased a Mossberg 590(#50668); my first shotgun The first time I shot it (25 rounds), I cleaned the barrel with Hopp's solvent, using bristle brush, patches, etc and finished with a light coat of oil. As above, barrel ended up looking clean and smooth in the inside. Went shooting last weekend and shot 82 rounds at the range(variety of 00Buck and slugs). Tried to clean the gun today and seem to be having a lot more trouble getting the inside of the barrel to be spotless. In various places, I am not sure if what I see is normal abrasion or I just have not been aggressive enough running solvent and bristle brush through it.
So my question is, what is to be expected? Should bore always look smooth/shiny after cleaning? I.e. should I have been even more aggressive(ie more solvent, more brushing, etc.) OR is it normal for what looks like abrasion to appear due to wear from the shot,slugs, etc?
Again, a newbie at shottys, so appreciate any guidance.
-
By JIG
I was hoping someone could recommend a professional Gunsmith who can handle my Hi-Standard Model 103 Supermatic Citation
Back in the day my Grandfather really loved pistol shooting and bought this beauty right from the factory and took extensive care of it because I see very little wear and tear on the gun
My father inherited it and has passed it to me after I got my PID, but as it hasn't been used in 20+ years I'm a little iffy on using it
I'm kind of equating it to cleaning a car (bad example but still) it is a heck of a lot easier maintaining an already clean car after detailing then starting from ground up cleaning all the nooks and crannies
What I'm hoping for is a really good Gunsmith to disassemble, clean, oil, check/replace springs and replace the grips (too small for my hands); basically get the gun into pristine shooting condition so going forward I can maintain it
I'm willing to drive to the best so any suggestions?
Also just to let you know the picture does it no justice
-
By Bagarocks
Just looking to see how the reloading community cleans and maintains your dies. And what type of tips for cleaning and storage I could possibly pick up from the vast population of the NJ gun forum.
I have both handgun and rifle dies.
-
-
Posts
-
After Karina, there where laws passed to prevent the seizure and confiscation of legally owned firearms during an emergency. Robert T. Stafford Disaster Relief and Emergency Assistance Act H. R. 5013 - Disaster Recovery Personal Protection Act of 2006 (known as the Vitter Amendment) H. R. 5441 -
And it's sad because there's a lot to like, especially South NJ, the North West, and the Beaches. Like Washington State, the Illiberals have managed to take something good and totally destroy it. -
-
I reached out to Ridgewood Rifle Club after I saw an AD in NJARPC magazine. Their email is "[email protected]." They're primarily targeting JR/youth shooters and their parents as they only shoot .22 LR or Air Rifles on paper targets. Here's some more details: -
-
-
