Jump to content
Gunnz

Never seen these before... NJ legal

Recommended Posts

So.... Watching my favorite guy, Hickok45..... And he had this cool upper that converts your glock pistol frame into a carbine.

 

Wondering if these are legal in this great state? Link to the manufacture is below, also, I provided a link to the youtube video.

 

I love that guy!

 

http://www.mechtechsys.com/glock.php

 

Share this post


Link to post
Share on other sites

In the video, Hickok says (granted he is no lawyer) that it is considered an accessory.

The manufacturing website says its legal in all states.

Share this post


Link to post
Share on other sites

Federal law Legal.... NJ law is the grey area... That's why I created the thread to get the opinions of everyone who deals with NJ law and our FFLs who also may be able to help out.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By Blank
      These will be in NJ Stores soon.

      Description
      100% MADE IN AMERICA.  All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green.  MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting.  Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel.  Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard  – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine. 
    • By bhunted
      A fellow forum was asking about a display case for his wife’s pistol I believe. So I decided after seeing some display cases for insane prices, to make my own out of more or less cheap prices. 
      This one will be for my Nighthawk Custom Falcon 1911.
      I started out with a humidor I had when I was on a cigar kick with the club.
      Humidors make perfect cases for your gun. 
      Why? Its designed to keep moisture in so your cigars don’t dry out. Ones that are well made have a nice tight seal.
      ‘But John, we don’t want to keep moisture in. It will hurt the gun’. Correctomundo! But using it to keep moisture out works too! If you are not a cigar smoker, a humidor keeps the cigars from drying out by putting a moisture pad inside. We simply won’t be using the moisture pad nor the cheapo humidity gauge they usually give you.
      So lets start. One used but still in great shape humidor with glass lid. If you don’t have one, you can pick up something decent for about $50. I added a lik leather NH tag to use to open lid. They are air tight and easier to open with something to grab.

      If you use a humidor, they sometimes come with a lil shelf and divider. Toss them.
      Next, we added a little antique bronze clasp. 5 for $12 on Amazon. They come with tiny wood screws. You’ll need a jeweler type phillips head and a small awl to start a hole. Do not screw in without a starter hole. Also a mini pad lock with skeleton key.


      Next, you’ll want something to lay in there like velvet. I chose purple velvet. Rather than buy it by the yard, I actually got 2 - 14”x14” pillow shams with zippers on Amazon for about $11...
      This is a lot cheaper than buying it by the yard plus you don’t gave to sew anything. Just stuff it and zip it.

      You will need something to stuff it. That is your choice. I already had a bag of poly fill from another project. You can even rio open al old pillow and use the guts.


      Next is rechargeable Silica packs. I got a 25 count bag cheap also on Amazon. I chose to line the bottom of the case and also throw some inside the sham.


      Once you beat it and adjust it to get in the right position, you can see how the gun sits and adjust as needed.
      Next is optional and not cheap. I picked up 2 - Sensor Push bluetooth temp/humidity sensors for $50 each. One for the box and one for my safe. After calibrating them and pairing them to my phone, I inserted one into the display case.


      You don’t have to do this but I’m a bit of a tech nerd so.... [emoji6]
      You can also use a cheap digital one too.
      This one transmits data and stores 20 points which you can set alarms in the app if moisture increases. Kind of more important in my safe but....[emoji16]
      Here is a sample of the data. I just put them in so it will take time to level off.


      That’s pretty much it. Outside of the sensors, its cheap, easy and looks great. You can fo crazy with it or go simple.



      Sent from my iPhone using Tapatalk
    • By Blank
      Costa's Final NJ Training session. We are taking it to another state after this.
      There are a couple slots left...https://costaludus.com/courses/carbine-elements-theory-1-cet1/

    • By JerseyJim
      On Black Friday Reloaderz is having an open house.  We plan on visiting and will give a report.  
            Friday, November 23, 2018 at 10 AM – 8 PM
       
  • Posts

×
×
  • Create New...