ZEDisDEAD 0 Posted September 20, 2015 Looking for a reliable gunsmith for a stock repair job. I live in the Spotswood area, but if I have to travel a bit thats fine. I have a nick, not a dent in my oil finished, dark walnut grade II/III Browning Citori 725 stock. Its about 1/16 of an inch. Any help would be appreciated. Also what kind of price would I be looking at? I know it probably sounds like a small thing, but I am not a wood guy...at all, and this is my precious so I am not willing to experiment. Included pic: Quote Share this post Link to post Share on other sites
Kimber45 3 Posted September 20, 2015 Try placing a steaming hot cloth over the area. The hot steam will swell the wood and return it close to the original shape. You might have to buff the area with 000 steel wool and coat with some linseed oil.... Quote Share this post Link to post Share on other sites
T Bill 649 Posted September 20, 2015 That is definitely not a steam job. Not sure that is handled best by a smith. Best wood finish repairs I have seen on ultra fine walnut stocks have been done by fine furniture re-finisher. They have things no smith would have. Quote Share this post Link to post Share on other sites
Parker 213 Posted September 20, 2015 Once the wood fibers are cut, steaming with do little to fix your situation as TBill says. I'd put some stock stock filler in that hole, touch it up with some BLO and call it done. Your stock now has a beauty mark that shows it's been used. Quote Share this post Link to post Share on other sites
RichP 115 Posted September 21, 2015 My philosophy, let the wood develop some character from use. When I retire the gun, or before passing it down, I will make the decision whether or not to restore it. Otherwise, unless you plan on sending it away to a dedicated stockmaker, your best bet would be a fine furniture repairer/restorer, as stated above. Quote Share this post Link to post Share on other sites
10X 3,278 Posted September 21, 2015 Do a search (or create an account and post the question) on the trapshooters.com forum. Your question gets asked (and answered) there a lot. I know I've seen recommendations for gunsmiths/stock makers in PA (I don't recall the names); not sure if I've seen any in NJ come up. Quote Share this post Link to post Share on other sites
rifleman 90 Posted September 22, 2015 Don't worry about it. Just shoot it. Quote Share this post Link to post Share on other sites