Jump to content
weekend_junkie

Texas CHL course recommendations?

Recommended Posts

Wow...that's a hell of a difference in locations. For Houston, I would suggest http://newworldordnance.com/carry-class/

 

It's a small LGS and he also owns Texas Gun Forums. Army veteran and all around good guy. And he only charges $49 for the class.

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Wow...that's a hell of a difference in locations. For Houston, I would suggest http://newworldordnance.com/carry-class/

 

It's a small LGS and he also owns Texas Gun Forums. Army veteran and all around good guy. And he only charges $49 for the class.

 

 

Sent from my iPhone using Tapatalk

is that Domineaux?

Share this post


Link to post
Share on other sites

No...its Ryan at New World Ordnance. Domineaux and Shipwreck share the admin duties and Ryan owns the site.

 

Ryan doesn't post much on the forums anymore but when he does, he's Rusty Shackelford.

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Nah, I hear it's just a short trip for a true Texan

It's just over 8 hours without stopping so figure 9-10 with fuel/food/bathroom stops...that's a long drive by almost anyone's standard (except maybe long haul truckers)

 

 

This signature is AWESOME!!!

Share this post


Link to post
Share on other sites

This is the guy I used for my Texas CHLhttp://www.bigthunderfirearms.com/Recommend by a fellow forum member and I definitely recommend him.

Amazingly, it all worked out. Here's how I went about it:

 

I did the course in Houston and met with Jason (http://www.bigthunderfirearms.com/) on Monday night. We met at a range he chose and took care of the qualifying first. He even snuck a little bit of coaching in there and got me punching the same hole by the end of it. The course was a 1-on-1 discussion over dinner. He really took his time on the concept of force v deadly force before moving onto rights and made sure I understood my rights and how they factor into various scenarios. I certainly recommend him, both for his knowledge and enthusiasm on the topic.

 

Fingerprints in Houston were impossible, but I was traveling to Midland the next day. I found a chiropractor right in Midland that had a completely open schedule and the whole process was easy as pie. 10 minutes and 10 dollars later, I was on my way.

 

Now I'm home and just need a passport photo before I mail it all to TX DPS.

Share this post


Link to post
Share on other sites

Amazingly, it all worked out. Here's how I went about it:

 

I did the course in Houston and met with Jason (http://www.bigthunderfirearms.com/) on Monday night. We met at a range he chose and took care of the qualifying first. He even snuck a little bit of coaching in there and got me punching the same hole by the end of it. The course was a 1-on-1 discussion over dinner. He really took his time on the concept of force v deadly force before moving onto rights and made sure I understood my rights and how they factor into various scenarios. I certainly recommend him, both for his knowledge and enthusiasm on the topic.

 

Fingerprints in Houston were impossible, but I was traveling to Midland the next day. I found a chiropractor right in Midland that had a completely open schedule and the whole process was easy as pie. 10 minutes and 10 dollars later, I was on my way.

 

Now I'm home and just need a passport photo before I mail it all to TX DPS.

Good to hear it all worked out for you! Time to start shopping for holsters!

Share this post


Link to post
Share on other sites

Chiropractors do prints in Midland? That's a broad range of services Sent from my iPhone using Tapatalk

It worked, so I wasn't asking questions!

 

I did tell people what it's like here in NJ, and how they should support the effort to change it before it spreads west. However, I don't think TX is too worried...

Share this post


Link to post
Share on other sites

So what's the deal with fingerprints? Must be done in TX? I'm trying to figure out how I can fly into Houston, get this done and fly back all during the same weekend.

It's definitely doable. I did mine in a 3 day trip. I believe the prints have to be in tx.

 

Sent from my SM-G900V using Tapatalk

 

 

Share this post


Link to post
Share on other sites

It's definitely doable. I did mine in a 3 day trip. I believe the prints have to be in tx.

 

Sent from my SM-G900V using Tapatalk

Fingerprints and the course need to be done in TX. Fingerprint scheduling gets busy in the bigger cities, so make sure you plan at least a few weeks in advance so you can make it all happen within the same day. You can mail in the paperwork once you're home, or you can submit online if you have a high quality color scanner (mainly for the ID photo).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • In 50 years of living in NJ I've never experienced any attempt to inspect the interior of the home, and only one definite inspection of the exterior for an announced reassessment of all properties and that was a drive by. About 9 years of that was living in an apartment, but still, uncommon. Every place I lived had either a finished attic, basement, or both. But they were also included in the habitable square footage on the taxes when we got there. 
    • 27.00 and change in tolls to drive down the shore from Rutherford,  47.00 in tolls to go out to Long island to visit dying relatives. Now I read they are going to raise the fees in the DMV. Murphy lied just to get elected when he said that seniors will get a significant tax break with his StayNJ" program to stop us from leaving.   Keep voting for democrats...this is what you get.  Tax and spend is all they know.  Never cut anything.  This state sucks.
    • I get the added benefit that since I have a TSP rather than a true 401(k) they tax my retirement too. Yaaaay!
    • PX4 Full Size 9mm Type G. Upgrades include: - Type G Stealth/Low Pro Levers and Slide Release - Truglo Tritium Pro Sights, White Outline Front Sight - Beretta Competition Trigger Group - LTT Optimized Trigger Bar - PX4 D Spring All parts professionally installed by gunsmith. Pistol has 400rds through it. All original parts (trigger group, trigger bar, Type F levers, sights) are included in sale. Original Beretta case and all contents included in sale. 3-10rd mags (these are the original mags that came with it). Pistol is in Excellent condition, there are a couple minor smudges on the lower part of the slide near the frame which I guess is from the sight vise. If I didn't point them out you wouldn't even notice. Trigger is super sweet, especially the SA Reset. Between the gun, parts, and gunsmith labor I have about $1200 into it. $800 Sale is Cash Only.   I'm in Whippany near Morristown. I will travel within a reasonable distance to meet at your preferred FFL to do the transfer. Buyer pays transfer fees.   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------      
×
×
  • Create New...