stevenschaffer 2 Posted December 23, 2015 Anyone have pictures of a pinned bcm gun fighter stock? I know how and where the pin goes but the way the stock is the side is slightly slanted and seems hard. If I put a pin in the part you squeeze to move the sock...You can't squeeze and activate it, would that work too? Quote Share this post Link to post Share on other sites
carl_g 568 Posted December 23, 2015 I have been looking at the MOD 0 stock myself lately. One thing with those stocks is that they can be taken apart with an allen wrench. If you look at this video starting at like 2:30, he takes it apart and there does not appear to be a lot of material to pin. Good luck! Quote Share this post Link to post Share on other sites
DanMarvel 9 Posted December 24, 2015 if you succeed please inform us with pictures Quote Share this post Link to post Share on other sites
stevenschaffer 2 Posted December 24, 2015 if you succeed please inform us with picturesI will post my Complete bcm ar when it's done and put together. Quote Share this post Link to post Share on other sites
Displaced Texan 11,653 Posted December 24, 2015 Looks like the mechanism could be locked into place, rather than pinning it. Without having one in my hand, I bet that the 'H' shaped piece could be blocked in position, rendering the stock non collapsible. One would require tools to remove the block. Quote Share this post Link to post Share on other sites
stevenschaffer 2 Posted December 25, 2015 Looks like the mechanism could be locked into place, rather than pinning it. Without having one in my hand, I bet that the 'H' shaped piece could be blocked in position, rendering the stock non collapsible. One would require tools to remove the block. Seems like a good idea . But doesn't the law say it needs to be pinned.. Quote Share this post Link to post Share on other sites
Displaced Texan 11,653 Posted December 25, 2015 Seems like a good idea . But doesn't the law say it needs to be pinned..Subject for quite the heated debate, but the law does not specify that the stock need be pinned, only that it cannot be adjustable. This is the method I use for my stocks: http://www.ar15.com/forums/t_3_4/607375_How_to_pin_an_MOE_Stock__for_ban_states_.html No pin required. Quote Share this post Link to post Share on other sites