Jump to content
jackandjill

Source for 223 bullets

Recommended Posts

Monmouth's concept is bulk and savings, let me think about how it could work to pick up locally and save on shipping.  I will reply back in this thread and thank you for the interest.

 

Where you guys would really make out is that Monmouth is expanding into the AR parts market.  We have bulk ordering/distributor with Luth-AR, Aero, Ballistic, Magpul (no mags ever), etc...

Share this post


Link to post
Share on other sites

Monmouth's concept is bulk and savings, let me think about how it could work to pick up locally and save on shipping.  I will reply back in this thread and thank you for the interest.

 

Where you guys would really make out is that Monmouth is expanding into the AR parts market.  We have bulk ordering/distributor with Luth-AR, Aero, Ballistic, Magpul (no mags ever), etc...

Thank you

Share this post


Link to post
Share on other sites

Just remember if Monmouth actually is in NJ then there is sales tax too...

 

 

I ran the numbers and NEreloading was cheaper than Monmouth once you bought more than 2000 pills at a time

 

Monmouth doesn't include shipping in their listed online pricing -- not sure how they would be able to make it cheaper except that you wouldn't have added shipping costs

 

I need some .223 and .308 bulk  too

Share this post


Link to post
Share on other sites

Just remember if Monmouth actually is in NJ then there is sales tax too...

 

 

I ran the numbers and NEreloading was cheaper than Monmouth once you bought more than 2000 pills at a time

 

Monmouth doesn't include shipping in their listed online pricing -- not sure how they would be able to make it cheaper except that you wouldn't have added shipping costs

 

I need some .223 and .308 bulk  too

Copied from their webpage

 

Bulk packaged, sold in 500 or 1000ct increments, the 6000ct Factory Case or our 8000ct Monster Box.  We can ship up to 2000 for just $6.35 + insurance or the Monster Box for just $11.80 + insurance.

SAVE MORE!  Fill the box by ordering 2000ct and pay only $0.94 more in shipping costs, or $1.82 more for the 8000ct Monster Box.

Share this post


Link to post
Share on other sites

Copied from their webpage

 

Bulk packaged, sold in 500 or 1000ct increments, the 6000ct Factory Case or our 8000ct Monster Box.  We can ship up to 2000 for just $6.35 + insurance or the Monster Box for just $11.80 + insurance.

SAVE MORE!  Fill the box by ordering 2000ct and pay only $0.94 more in shipping costs, or $1.82 more for the 8000ct Monster Box.

 

I saw that too but add it to your cart and get the shipping quote -- It's not $11 more like $16 or $17

 

Then the website adds sales tax --  I'm not sure if the sales tax would follow thru to the end of the order -- I stopped before any real info needed to be added

 

From what I can see, monmouth is in Texas so the sales tax should go away  --  but there won't be any "picked up" orders from us for a discount

Share this post


Link to post
Share on other sites

I've placed 2 orders, one for 1k and one for 2k. Shipping on both was less than 8.00

And delivery was fast. I'm guessing because they ship from nj that the tax can't be avoided.

 

You stayed in the small flat rate box -- for that price --  I'm just stating what I saw in my cart with 2000 .223 FMJ, 1000 .223 SP and 600 .308

 

Can you confirm that the package did in fact come from NJ? 

Share this post


Link to post
Share on other sites

Yes your right mine were both small orders. I was using my phone and didn't read all the new posts. They were both shipped from a P.O. Box in M analapan N.J. Which answers the tax question. Didn't noticed the jersey add. That might explain why shipping was so fast

Share this post


Link to post
Share on other sites

Monmouth's concept is bulk and savings, let me think about how it could work to pick up locally and save on shipping.  I will reply back in this thread and thank you for the interest.

 

Where you guys would really make out is that Monmouth is expanding into the AR parts market.  We have bulk ordering/distributor with Luth-AR, Aero, Ballistic, Magpul (no mags ever), etc...

Anything word ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  •  

    alderfer921.jpg

  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I load a lot of light .38 loads for police revolver matches.   You named a bunch of excellent powders, but I've been slowly converting my target loads (.38, 9, .45) to use WST powder.  It burns so cleanly, especially compared to Bullseye, and it meters with amazing consistency. I've gone years without having to adjust the powder setting on the Dillon.  It just stays within 0.1, seemingly forever. My load data is consistent with that shown here:  https://www.bullseyeforum.net/t9231-wst-38-loads-for-hg-50-bullet and I crimp with a little less than 1/8" of the wadcutter exposed.  There isn't a crimp groove, but with such light loads it doesn't matter.   I like Hornady, Zero, and a few other bullets, but I use almost exclusively the 148 gr wadcutters from CNJ casting.  Lower cost, great quality, very fast shipping, and they are always in stock.   I favor CCI primers, but will use Winchester, and to be honest I'm not sure if I can tell the difference.   Federals are great, but harder to find, and since I don't have a problem with light strikes (a problem that can sometimes be solved with the 'softer' Federal primers) I don't bother looking for them.  I've read that magnum primers increase the variability of velocity--you'll see it in the standard deviation when you chrono a bunch of rounds.  I've not tested that myself, I just avoid magnum primers for target rounds.  It's not like the fast powders are hard to ignite. I use Starline brass, all from the same lot, for matches.  I'm on about the 7th reload of this batch, and I expect to keep using it for a good while yet.   I use mixed brass for practice, and it does pretty well also.  I do get some loads that bulge at the bottom of the seated wadcutters, and so can't fit into a match chamber but they almost always fit in another revolver, so they get used. These loads will consistently group under 3" from a sandbag rest at 25 yards.  I suspect they'd do better if I worked on my sandbag technique and put a scope on the gun.  
    • Selling my Harrington & RIchardson M1 Garand. All numbers matching but wood was reworked (as is obvious from the pictures). I believe it's from the Korea/Vietnam era but do not have much history behind it besides having bought it with a few other milsurp rifles at the same time. Rifling is in good shape as is the rifle overall. I know for a rifle like this pictures especially matter so please bear with my amateur skills. If you have any questions or would like better/more pictures of the rifle, feel free to reach out and I'll do my best. Willing to meet within 30-45 minutes of Burlington at your FFL or can go through mine. Obviously must have FID, permit, etc. as required by the state for an FFL to do a transfer. All FFL fees to be paid by buyer. The first to post "I'll take it" wins the sale. Asking $1500 or best reasonable offer.
    • Looking to sell a basic NJ compliant Smith & Wesson M&P 15 Sport II rifle in 5.56/.223 with, at best, 200 rounds down the rifle. Works beautifully and will include (1) 10 round magazine.  Willing to meet within 30-45 minutes of Burlington at your FFL or can go through mine. Obviously must have FID, permit, etc. as required by the state for an FFL to do a transfer. All FFL fees to be paid by buyer. The first to post "I'll take it" wins the sale. Asking $625 or best reasonable offer.
×
×
  • Create New...