Jump to content
Ace08066

Clearcoat a camo paintjob? Thoughts?

Recommended Posts

So...  This happened today.

13882389_1149998178407507_20249832346523

 

 

I'm happy with it...  But now I'm torn.  It has a really nice, ultra-flat finish you can't really see well in the photo.  I want to preserve the paint as long as possible, which leads me to want to put a layer or two of clear coat on it....  But I don't want to end up with a semi-gloss finish or really ANY reflectivity at all with the clear coat.  

 

Anyone "been-there-done-that" recommend a good sealer / clear coat that will NOT add reflectivity?

Share this post


Link to post
Share on other sites

I know they make flat/matte clear coats. Whether or not they would be good is beyond me.
Keep in mind that if you put a few rounds down range, the paint on the barrel may not hold up very well.

 

(example:)

http://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Flat-Matte-Clear-General-Purpose-Spray-Paint-249087/100670439

 

Edit #2: Reviews on it are horrible, so dont use it. 

Share this post


Link to post
Share on other sites

I know they make flat/matte clear coats. Whether or not they would be good is beyond me.

Keep in mind that if you put a few rounds down range, the paint on the barrel may not hold up very well.

 

(example:)

http://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Flat-Matte-Clear-General-Purpose-Spray-Paint-249087/100670439

 

Edit #2: Reviews on it are horrible, so dont use it. 

 

Should hold up, I didn't use that generic camo paint I used the 1,000+ degree engine paint.  Kinda wish I got Olive for the base instead of tan now but little late for that heh.

 

The only clearcoat they had that was 1,000+ degree was fucking super gloss.  :( And yeah I saw those reviews lol thanks anyway tho!!

Share this post


Link to post
Share on other sites

^Thats what im thinking.. i dont think a clear will do much.. You'll be touching up a paint job like that fairly regularly, though i personally like worn/faded camo jobs; you cant get that effect with fancy techniques. 

Share this post


Link to post
Share on other sites

Never painted a gun. If painting AR's do you take it all apart before spraying it or can you do it completely assembled and whats the best technique?

Completely assembled is fine. Wipe it down with alcohol and just spray right on the gun. Find the color palate you want and whatever you want to use as a pattern

 

this signature exceeds the 15 character capacity count

Share this post


Link to post
Share on other sites

Thanks 

 

I roll up paper and put it in the bolt to keep paint outta there.  I like to hang it up to paint it.  For my shotgun I punched out the primer on a spent shell, put a string through it, tied it to a small washer, put the shell in the barrel and the string came out the end of the barrel I hung it on a hook.  Worked like a charm.  Imagine it'd work just as well with an AR though never tried.

 

Edit: Until the damn string broke and I just hung it as you see in the pic.  LOL

Share this post


Link to post
Share on other sites

Someone ought to start a Rattle Can Photo thread.

 

So many ways you can do it. My last one, I used the Rustoleum Camo 6 pack and nothing more than some cheap fish net stockings. Carefully put whole rifle in the leg, tie off the end, rearrange the diamonds all over the gun and you end with a rattle snake pattern. Was going to clear coat it but didn't think it was necessary. Can always repaint it.

Couple areas like theMP buis didn't hold perfect but everything else came out pretty good.

 

95235427e6835d7e5f6dc0de8604906b.jpg

d0e549478086d19b482aa9a13f5878ea.jpg

ab0f8259f586263cb56e56966be0185e.jpg

 

 

 

Sent from my iPhone using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

That's a bad ass paintjob, man...

Thanks. As long as you cleaned it good and didn't put paint on real heavy, it should hold up fine. Paint needs to be fine layers. I've shot it several times since the paint job and paint is still holding on.

 

 

Sent from my iPad using Tapatalk

Share this post


Link to post
Share on other sites

Fishnet stockings patterns turns me on. :dancer:

I got extra leg left in fluorescent orange, you want it? lol.

Orange, Std Size (5'-5'10", 100-175 lbs) - Nylon Seamless Fishnet Pantyhose https://www.amazon.com/dp/B001SKTVME/ref=cm_sw_r_cp_api_.m5Rxb517B541

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Paul,

 

          I just realized I will be 20 minutes away from your store in 10 days! My job is sending me to Phoenix for training for a week.

Ha...Me in Arizona in August....Not looking forward to the HEAT!  :diablo:  Or Scorpions, Black Widow Spiders, Rattlesnakes (Even though John says they taste like chicken) etc.

Share this post


Link to post
Share on other sites

Paul,

 

I just realized I will be 20 minutes away from your store in 10 days! My job is sending me to Phoenix for training for a week.

Ha...Me in Arizona in August....Not looking forward to the HEAT! :diablo: Or Scorpions, Black Widow Spiders, Rattlesnakes etc.

By all means, try the snake. It is delish! Taste like chicken! Not kidding! :)

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I very seriously doubt this has anything to do with terrorism.    1) Harbor pilots are VERY seriously vetted, and highly trained. Not to mention extremely well paid. My experience knowing a few of them, and knowing how they are recruited and screened tells me that there is a slim to highly unlikely chance that a harbor pilot would have participated in anything like that.    2) Maintenance of foreign flag ships is well known to be dubious. Especially these days. These were NOT US flag, Jones act sailors. It was (to my understanding) a largely Indian crew on that ship, with a Ukrainian Captain. Indian crews are not exactly known for being stellar.    3) The bunkers (fuel) these ships use is ‘Bunker C’, which is a heavy, dirty fuel oil that can, and usually is, pretty contaminated. This stuff ain’t your car grade gasoline or diesel fuel. It’s nasty.   It requires nearly constant filter changes and maintenance to the engine/generators. The ship took on fuel prior to departing port, which would stir up all kinds of shit in the fuel tanks, which would contribute to particulates in the fuel lines/filters.    4) I’d say the posting of the chief engineer for Maserek above was pretty spot on as far as chain of events.    This was a shitty accident, with horrible timing and outcome. Not a terror attack. 
    • I saw Lara's interview on Bannon's War Room, and that gave me pause for thought. Her conjecture depends primarily on the veracity of her sources. Regardless, if it's not applicable in any way to this ship disaster, the methods described seem valid to me. And worthy of consideration for the future. As I said before, IMO something is coming. Death by a thousand cuts? Lara Logan Provides Comprehensive Baltimore Update: Experts in Behavioral Analytics, Counter-Terrorism, and National Security Analyze Recent Incident | The Gateway Pundit | by Jim Hᴏft
    • Another big windfall for governments'. The 'winner'? Not so much. Mega Millions $1.13 billion winner is facing mega tax bill. The amount is staggering. - nj.com
×
×
  • Create New...