EWC88 24 Posted January 19, 2017 Need help from those of you who know paint, cause I don't. Just bought a house, well 31st it'll be MY house, and old owners loved pink. Home inspector told me what type of paint style or whatever they did because it's not your normal look. Was informed a good primer will take care of the style it is. When going into lowes they have a huge assortment of primers. No clue the differences of them all so I am lost. Basically I need advice on a good primer, comes in the big ass jug since I will be doing whole house. Quote Share this post Link to post Share on other sites
checko 180 Posted January 19, 2017 If you use the signature or better paint you shouldn't need to prime over the pink color. Sent from my SM-N920V using Tapatalk Quote Share this post Link to post Share on other sites
quickkill730 3 Posted January 19, 2017 I would just use a standard primer. I think it is called PVA primer sold in 5 gallon buckets. Cheap and it should be all you need. 1 coat my not completely cover the pink but that is ok it will lighten the color dramatically and then 1 coat of color, signature or better will do. Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Lambo2936 297 Posted January 19, 2017 A coat or two of primer and then a paint and primer in one on top should cover it nicely. Covering crazy colors sucks....Killz makes a good primer..You get what you pay for..If its a high end house and you can afford to drop a bit more $$, look into benjamin moore paint rather than home depot stuff (behr, etc) 1 Quote Share this post Link to post Share on other sites
EWC88 24 Posted January 19, 2017 I don't care on cost as long as I see no pink lol. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted January 19, 2017 A coat or two of primer and then a paint and primer in one on top should cover it nicely. Covering crazy colors sucks.... Killz makes a good primer.. You get what you pay for.. If its a high end house and you can afford to drop a bit more $$, look into benjamin moore paint rather than home depot stuff (behr, etc) Second benny moore.Some of the Aura line may be a one stop shop for you. Paint once. Ask the guy at the counter. Product may be more expensive but one coat vs 2-3 ( 1 being primer) is worth more in your time. Quote Share this post Link to post Share on other sites
SuRrEaLNJ 294 Posted January 19, 2017 paint and primer in one is marketing bs, aside from the aura line, wich runst about 70 a gallon, but it is phenomenal at covering crappy colors. Prime and paint is the way to go even if the can says paint and primer in one. We still recomend that you be brepared for more than one coat because there are multiple factors that go into how well paint covers, one of wich being how long ago the house was last painted, and things like humidity in the home etc. paint dries out ofver time and after about 5+ years it really starts acting like a sponge to that first or primer coat if you use killz or similar make sure you use the latex stuff for large areas. i just primed a bathroom with BIN and the fumes really suck if it were me id hit it with either benjamin moore 02300 "fresh start" primer or zinzer 123 and then go over it with paint of choice. i have beef with valspar both as a product and a company working in a benjamin moore dealer that caries clark+kensington and valspar because were an ace store. they carry different lines, and even ace and lowes colors are different and it makes it a nightmare for us as a retailer, so i do admit strong prejudice. that being said never use the low end paint from big box stores, atleast get the good stuff, unless your selling or its a rental Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted January 19, 2017 Cheap is rarely good Good is never cheap Here's your bill..... Lol 1 Quote Share this post Link to post Share on other sites
boo 6 Posted January 19, 2017 With the caveat that I'm not a professional, I've had to paint over many a dark colored wall and had no need for primer as long as you're using good paint. I use Sherwin Williams, mainly because a contractor account gives me about 40% off the retail price. I've had great results with both Superpaint (a 2 in 1 primer/paint) and also promar 200/400. 1 Quote Share this post Link to post Share on other sites
CageFighter 236 Posted January 19, 2017 A basic primer is fine. You just want to cover the pink with white so it doesnt bleed/change the color of the paint of your choice. Im not a fan of the HD or Lowes paint, but use Ben Moore or Shermin Williams works fine. I paint (& do construction) on weekend to supplement my gun habit) Quote Share this post Link to post Share on other sites
T Bill 649 Posted January 20, 2017 This "pink" wouldn't happen to be a satin or gloss paint would it? If it is you need to knock the "shine" off before trying to cover it. Quote Share this post Link to post Share on other sites
paulnj088 9 Posted January 20, 2017 go to homedepot and buy a color in Marquee....One coat and your done Quote Share this post Link to post Share on other sites
EWC88 24 Posted January 20, 2017 The pink in areas have a shine and then also is a flat color. Quote Share this post Link to post Share on other sites
maintenanceguy 510 Posted January 20, 2017 I hire 25 kids in the summer to paint. We apply hundreds of gallons of paint each year. 1) If it has a sheen, lightly sand to knock the shine down. Many books say to use TSP. It works too but it's a mess. One or two strokes with sand paper is all it takes. You just want the shine gone. 2) Us a good primer. I prefer Kilz original but it stinks. There is a water based Kilz 2. Works well too but not as good as the original. Zinseer also makes a good primer. 3) Use a good paint. The big box stores will have 3 price ranges. Cheap, middle, expensive. Get the expensive. It will have more solids. More solids means a thicker coat when it dries, which means less coats needed. Don't bother with the "fancy" grade. Eddie Bauer or Tommy Hilfiger or some other designer will have paint that is no better than the store brand - if you get the best of the store brands. Quote Share this post Link to post Share on other sites
Malsua 1,422 Posted January 20, 2017 I'll just chime in that I'm a fan of Kilz and have also used Kilz 2. I've never had anything peel that was primer'd with Kilz. When I painted my house in 99, I use used Benjamin Moore's primer. In about 6 years I started to get peeling. Around the same time in 99, I painted my shed with Kilz and used the leftover house paint. It still hasn't peeled, 17 years later. I repainted my house in 2009 and shot Kilz first. We're almost 8 years in, no peeling. Quote Share this post Link to post Share on other sites
EWC88 24 Posted January 20, 2017 Been trying think what the inspector said was paint style and I believe it was faux, sounds right. Don't know if that also helps add advise. If sanding is needed what grit should I go with? Quote Share this post Link to post Share on other sites
maintenanceguy 510 Posted January 21, 2017 If you're just knocking down the shiny surface, 120 grit. If you have rough spots you want to remove, start with something course like 80 grit and then hit it with 120. The flatter the paint, the harder it is to see imperfections. If you are putting something shiny on the wall, you might need to sand with 200 grit to make the surface smooth. Commercially, we usually go with an eggshell finish. It's flat enough to hide imperfections but smooth enough that you can clean dirt and spills. Quote Share this post Link to post Share on other sites
ChrisJM981 924 Posted January 21, 2017 What color are you painting the walls? If they're going to be white, you might need to prime and add a coat or two. They were supposed to prime my walls then add 2 coats. I think it wound up being 1 coat and having another painter sent by the contractor after the first set was told not to come back. Oh, and we used the Valspar Reserve paint. It looks okay. It serves it's purpose for being washable though. After a few incidents of having to scrub crayon off the wall, we switched to washable crayons, and now it wipes off the latex paint with a paper towel and water. Quote Share this post Link to post Share on other sites
EWC88 24 Posted January 21, 2017 To be honest not sure what's going on wall, that's the lady job on telling me the finish so I paint. I'm sure we don't want shiny though. 1 Quote Share this post Link to post Share on other sites
EWC88 24 Posted January 21, 2017 Far as what I heard last time, a tan/cream color and light grey. Asked her more about it today and now she isn't sure...story of my life Quote Share this post Link to post Share on other sites
siderman 1,137 Posted January 21, 2017 just buy a gal of the paint and give a small area two coats, see what it looks like. Gonna do two coats anyway might as well be the finished color. Sometimes when painting over white/primer two color coats are needed anyway so this way you may save time/matl on two color coats vs 3 total. Besides a good paint job is more about proper wall prep anyway, patching, sanding etc... Quote Share this post Link to post Share on other sites
maintenanceguy 510 Posted January 21, 2017 Here's a tip. Buy your paint from a paint supplier instead of the big box store. Ask them if they can tint your primer to be a close match to your paint. Depending on the color you choose, they can sometimes do this. A primer coat close to your paint color makes it much more likely that one coat of paint will cover. We do this if we're painting a dark or bright color over something else dark or bright. Quote Share this post Link to post Share on other sites
ReadDude 0 Posted January 21, 2017 I will second the Ben Moore Fresh Start, it has the advantage of being pretty thick compared to many of the paints and primers from Lowes, etc.... IF you have a faux finish or anything with any sort of surface too it, it will help a lot with creating a smooth base to put a top coat on. No regular paint will do that even if it promised to be a primer. I have always regretted not using Fresh Start type primer on walls where I am making any significant color change or patching any significant damage or dirt coverage.. I also have almost always regretted not buy Ben Moore for my top coat too. It is very expensive, but it really does go on easier and it is usually less messy..... I am still trying to get spatter up from a project years ago with some cheap Olympic Paint from Home Depot. Quote Share this post Link to post Share on other sites