Jump to content
Servo Group

Servo Group Tactical NJ Training Schdule SALE

Recommended Posts

I took the Pistol 1 Course last year with Ryan, Scott, and Mike up in Princeton.  I drove about 2 hours for the course and I highly recommend them.  I applied a lot of the things I learned in a 3 Day Vickers Class I took the week before as well as refining my grip.  If I can take at least one thing in a course that I can immediately apply, I think it's worth it.   Price is right and the instructors are easily approachable.  I recommend these guys and look forward to taking more courses from an NJ based company (when I save up for more since some unfortunate recent events).  

  • Like 1

Share this post


Link to post
Share on other sites

Took advantage of their Jan. special they ran over New Years as I try to take a few courses every year. Last weeks Block 1 was  Well worth the money.

Good sound fundamentals and instructions. Nice combination of precision shot placement  sessions coupled with various  drills, Steel shooting at distance etc.  Excellent value  and well worth the  cost.

Good to be able to train close to home without the associated costs for long distance travel for training.

Instructors where  top notch. Highly recommend them. 

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, redwings9 said:

Took advantage of their Jan. special they ran over New Years as I try to take a few courses every year. Last weeks Block 1 was  Well worth the money.

Hey! I was there too, I was the non-LEO (think there was only three of us) that wasn’t rocking the 1911. Who were you?

Share this post


Link to post
Share on other sites
On ‎12‎/‎31‎/‎2017 at 4:27 PM, Servo Group said:

Thats simply a request of the host range. It's a Police range and that's what they require. However we are running an open enrollment Vehicular Counter Ambush course at our Princeton location. The class is exactly the same.

Hope to see you there,

Ryan

I'm sorry for the late post but I just saw this.

Does this LEO Dept / range know who pays their salaries and for the range?

t's not a matter of insurance either.  The course provider should carry insurance.

When I see "Protect and Serve" I chuckle. You folks live in NJ you know they are your masters.

Rant OFF. And BTW I'm not anti-Cop.  Just anti-Elitist.  

Share this post


Link to post
Share on other sites
On 4/15/2018 at 6:19 PM, blksheep said:

Anyone go last Saturday to Princeton?

 

Great class

 

On 4/16/2018 at 6:17 AM, redwings9 said:

I was there. Great class. These guys do a great job. Good group on Saturday and the weather was great. Highly recommend them. The New Years discount was a nice bonus. 

I was there - I was the asian guy rocking the RMR CZ P07 with comp.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By RetNJ47
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • By RetNJ47
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • By 8lbsledge
      Looking to sell 1940 dated, Sniper marked Tula Mosin-Nagant with 40rd of Yugoslav Surplus LPS ammo with 2 clips. Rifle began it's life from the factory as a PEM pattern sniper rifle, sporting a copy of a German ZF-39 scope on a side mount. After the war, it was decommissioned and placed in a laminate stock, with the optic removed. Despite the stock replacement, the buttplate was retained from the original stock, and is numbered 217 like the rest of the parts. Rifle functions, and shoots fairly well, and the bore is in good shape. Photos provide proof of previous optic mount.
      Included: Rifle, 40rd surplus ammo, 2 clips
      Price for all pictured: $550 cash

      Located in Warren county, will not drive further than 45min from washington






    • By Mr.Stu
      I have been asked to run a class to prepare people for carrying a defensive firearm by my home range, Phillipsburg Pistol club.
      It will be held on August 6th, from noon until approx. 4pm.
      We will cover safe use of a holster and a number of defensive shooting techniques.
      The class will finish with running each student through HQC1 and a certificate will be provided for those that achieve a passing score.
      It is open to all, but members of Phillipsburg Pistol Club will have spots reserved for them.
      Sign up here: https://www.eventbrite.com/e/holster-use-and-defensive-shooting-techniques-registration-675278625547
  • Posts

    • I very seriously doubt this has anything to do with terrorism.    1) Harbor pilots are VERY seriously vetted, and highly trained. Not to mention extremely well paid. My experience knowing a few of them, and knowing how they are recruited and screened tells me that there is a slim to highly unlikely chance that a harbor pilot would have participated in anything like that.    2) Maintenance of foreign flag ships is well known to be dubious. Especially these days. These were NOT US flag, Jones act sailors. It was (to my understanding) a largely Indian crew on that ship, with a Ukrainian Captain. Indian crews are not exactly known for being stellar.    3) The bunkers (fuel) these ships use is ‘Bunker C’, which is a heavy, dirty fuel oil that can, and usually is, pretty contaminated. This stuff ain’t your car grade gasoline or diesel fuel. It’s nasty.   It requires nearly constant filter changes and maintenance to the engine/generators. The ship took on fuel prior to departing port, which would stir up all kinds of shit in the fuel tanks, which would contribute to particulates in the fuel lines/filters.    4) I’d say the posting of the chief engineer for Maserek above was pretty spot on as far as chain of events.    This was a shitty accident, with horrible timing and outcome. Not a terror attack. 
    • I saw Lara's interview on Bannon's War Room, and that gave me pause for thought. Her conjecture depends primarily on the veracity of her sources. Regardless, if it's not applicable in any way to this ship disaster, the methods described seem valid to me. And worthy of consideration for the future. As I said before, IMO something is coming. Death by a thousand cuts? Lara Logan Provides Comprehensive Baltimore Update: Experts in Behavioral Analytics, Counter-Terrorism, and National Security Analyze Recent Incident | The Gateway Pundit | by Jim Hᴏft
    • Another big windfall for governments'. The 'winner'? Not so much. Mega Millions $1.13 billion winner is facing mega tax bill. The amount is staggering. - nj.com
×
×
  • Create New...