Zeke

Need some aftermarket Glock sources

26 posts in this topic

Best value I’ve found are the Brownells slides for $199.

https://www.brownells.com/handgun-parts/slide-parts/slides/rmr-cut-slide-for-gen3-glock-9mm-prod107977.aspx

They don’t look the best, but they do everything you need for less than the boutique slides or sending your own out to get milled.

My Fauxland Special has the Brownells slide G19 with the lightening cut over the barrel.

Barrel/comp: I like the KKM setup.

Trigger - I like the Overwatch Falx, although my G19 has the Overwatch Flat Tac trigger. I prefer the curve of the Falx - flat triggers just feel weird to me.

1 person likes this

Share this post


Link to post
Share on other sites

@Smokin .50 watch this

wtf is @blksheep

4 minutes ago, High Exposure said:

Best value I’ve found are the Brownells slides for $199.

https://www.brownells.com/handgun-parts/slide-parts/slides/rmr-cut-slide-for-gen3-glock-9mm-prod107977.aspx

They don’t look the best, but they do everything you need for less than the boutique slides or sending your own out to get milled.

My Fauxland Special has the Brownells slide G19 with Window.

Barrel/comp: I like the KKM setup

Trigger - I like the Overwatch Falx, although my G19 has the Overwatch Flat Tac trigger.

@Mrs.Zeke

Share this post


Link to post
Share on other sites

Oh, don’t forget you’ll need:

• Optic - Trijicon RMR06 with Battlewerx anti flicker sealing plate

• Extended controls - Glock OEM

• Suppressor sights - Ameriglo

• Magwell - Agency

and

 • Grip job - Modern Materiél.

;) 

You should probably also get @Mrs.Zeke a comp gun too. G34 is a nice place to start.

Share this post


Link to post
Share on other sites
1 minute ago, High Exposure said:

Oh, don’t forget you’ll need extended controls - Glock OEM, suppressor height sights - Ameriglo, a magwell - Agency, and a grip job - Modern Materiél.

;) 

Don’t hold back buddy. Jeebus!

you guys will make @GramGun79 proud 

1 person likes this

Share this post


Link to post
Share on other sites

You don't need any of that. Keep the 19 stock and get a 34 they can be found for less than $600. Put dawsonprecision.com sights on it and a DK Custom trigger kit in it and your done. I'll bring mine on Saturday if you would like to check it out. If you feel the need you can get a magwell and basepads but it's not necessary if you practice  (or in my case shoot single stack) 

Share this post


Link to post
Share on other sites

Also if you are planning on getting into shooting some matches with all this stuff I would highly recommend not buying anything yet. Just use what you have now and figure out what direction you want to go in. Meaning what division you want to get into. If you have good eyes you can stay in production and limited. If you need a dot on your pistol check out carry optics (CO) you'll need a gen 4 MOS 34 for that. If you want to get into true open well then zeke is gona be pissed...

Share this post


Link to post
Share on other sites

Im building a Poly80 so this is relevant to my interests. 

Slides- Ive been looking at L2D Combat and Southwest Precision for their milled slides. I know the slide cuts are just for looks, but I think they look awesome haha.

Trigger- Seems like the Apex Trigger kit is the go to. Ive never tried any of the triggers before fyi

Barrel- Im between Faxon, Agency and S3F TiN barrels. 

Sights- Ameriglo

Comp- Texas Black Rifle Co

1 person likes this

Share this post


Link to post
Share on other sites
2 hours ago, 10X said:

Achieving "Glock Perfection" always seems to require throwing away a lot of the parts supplied by Glock.

Meh.. she likes it, she can do what she wants. I’m jus a helper 

Share this post


Link to post
Share on other sites

The Zev slides are nice and come with RMR cut/plate but are a little pricey at $400ish stripped. From personal experience, don't get the Spartan style slide if you use a Safariland ALS Holster. The cutouts don't play nice with the locking system

2 people like this

Share this post


Link to post
Share on other sites

Also, ALS and comps can be problematic, especially if you have an aftermarket slide with a bull nose. You may have to hit the ALS button 2 times - once to clear the ejection port and again to clear where where the comp meets the slide.

2 people like this

Share this post


Link to post
Share on other sites
Ummmm where’ Da brake and Rmr widdle buddy?

No brake on this one. I have an rmr06 but I took the picture with the carbon cap because it though it looked nice. Bling bling buddy


Sent from my iPhone using Tapatalk
1 person likes this

Share this post


Link to post
Share on other sites

Jagerwerks does great slide work as does Loki Tactical. Prefab though I'd say Zev, Southwest, L2D.

Barrel/Comp: Primary Machine stealth comp, Agency barrel/comp, Texas Black Rifle Co, Mayhem Syndicate, Black List, Faxon... too many to name really. Barrel is a barrel in my opinion, some just have a bigger bling factor than others.

Triggers: Agency, Apex, Overwatch, Tactical Trigger/Kineti-Tech which is what I am currently using.

2 people like this

Share this post


Link to post
Share on other sites
21 hours ago, tranceparent said:

Jagerwerks does great slide work as does Loki Tactical. Prefab though I'd say Zev, Southwest, L2D.

Barrel/Comp: Primary Machine stealth comp, Agency barrel/comp, Texas Black Rifle Co, Mayhem Syndicate, Black List, Faxon... too many to name really. Barrel is a barrel in my opinion, some just have a bigger bling factor than others.

Triggers: Agency, Apex, Overwatch, Tactical Trigger/Kineti-Tech which is what I am currently using.

You should introduce yourself.

Share this post


Link to post
Share on other sites
On 7/6/2018 at 0:59 PM, High Exposure said:

Don’t need to search for a deal. You can find stripped Gen 3 Glock 19 and Glock 17 frames for $70 at either Big Tex Outdoors or The Glock Store.

+1 I took this advice.  If you’re building from scratch do s G3 RTF frame.  I just received one recently and love it a lot.  Zev slide with RMR cut and suppressor sights on top.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now